Non-equilibrium solidification behavior associated with powder characteristics during electron beam additive manufacturing
Source abstract
Abstract
For components built by powder bed fusion with electron beam (PBF-EB), the resulting microstructure arising from non-equilibrium solidification, microsegregation and the formation of interdendritic phases significantly affects the material properties. Notably, the powder characteristics influence the heat absorption and conduction, thereby altering the molten pool behavior and solidification parameters. However, the effect of the powder feedstock on solidification during PBF has not been widely investigated. In this study, a CoCrMo alloy was fabricated using powders prepared by gas-atomization (GA) and plasma rotating electrode process (PREP). Under the given operating conditions, samples built using the two powders were characterized and compared. By performing multi-scale numerical simulations, melting and solidification were visualized and analyzed to elucidate the mechanism through which the powder characteristics influence the non-equilibrium solidification behavior during PBF-EB. The study revealed that after appropriate size control, compared with the GA powder, the PREP powder had a smaller specific surface area and higher sphericity; thus, the generated powder layer exhibited higher heat absorption and dissipation rates. Therefore, a high solidification rate was facilitated, thereby suppressing microsegregation. These findings contribute to PBF knowledge related to feedstock, proving to be an essential reference for selecting and optimizing metallic powders applicable to additive manufacturing.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
2. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
3. Effect of composition and phase diagram features on printability and microstructure in laser powder bed fusion: Development and comparison of processing maps across alloy systems
4. Selective laser melting high-performance ZrC-reinforced tungsten composites with tailored microstructure and suppressed cracking susceptibility10.1007/s42864-021-00076-8 ↗
5. Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy10.1016/j.actamat.2019.11.053 ↗
6. Effect of laser power on porosity and mechanical properties of GH4169 fabricated by laser melting deposition10.1007/s42864-020-00034-w ↗
7. Grain structure control during metal 3D printing by high-intensity ultrasound10.1038/s41467-019-13874-z ↗
8. Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V components10.1016/j.matdes.2019.107792 ↗
9. Effect of heat treatments on the microstructure and mechanical properties of an ultra-high strength martensitic steel fabricated via laser powder bed fusion additive manufacturing
10. Mechanical anisotropy and its evolution with powder reuse in Electron Beam Melting AM of Ti6Al4V10.1016/j.matdes.2021.109450 ↗
11. A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder10.1016/j.matdes.2016.06.037 ↗
12. Regular eutectic and anomalous eutectic growth behavior in laser remelting of Ni-30wt%Sn alloys10.1016/j.actamat.2016.12.061 ↗
13. Subgrain microstructures and tensile properties of 316L stainless steel manufactured by selective laser melting10.1007/s42243-021-00561-x ↗
14. A generalised hot cracking criterion for nickel-based superalloys additively manufactured by electron beam melting
15. Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys10.1016/j.actamat.2017.05.003 ↗
16. HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming10.1007/s11661-018-4826-6 ↗
17. Effect of cooling rate on microstructure and inclusion in non-quenched and tempered steel during horizontal directional solidification10.1007/s42243-019-00282-2 ↗
18. V. Bathula, C. Liu, K. Zweiacker, J. McKeown, J.M.K. Wiezorek, Interface velocity dependent solute trapping and phase selection during rapid solidification of laser melted hypo-eutectic Al-11at.%Cu alloy, Acta Materialia. 195 (2020) 341–357. https://doi.org/10.1016/j.actamat.2020.04.006.10.1016/j.actamat.2020.04.006 ↗
19. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
20. Toward a better understanding of phase transformations in additive manufacturing of Alloy 71810.1016/j.mtla.2020.100862 ↗
21. Investigation on Microsegregation of IN718 Alloy During Additive Manufacturing via Integrated Phase-Field and Finite-Element Modeling10.1007/s11665-018-3620-3 ↗
22. Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing10.1016/j.matdes.2017.03.004 ↗
23. Influence of laser scan speed on micro-segregation in selective laser melting of an iron-carbon alloy: A multi-scale simulation study10.1016/j.promfg.2018.07.121 ↗
24. Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling10.1016/j.jallcom.2016.01.250 ↗
25. Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating10.1179/1743294413Y.0000000142 ↗
26. Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam10.1016/j.powtec.2020.11.082 ↗
27. Significance of powder feedstock characteristics in defect suppression of additively manufactured Inconel 718
28. An overview of powder granulometry on feedstock and part performance in the selective laser melting process
29. Cellular lattices of biomedical Co-Cr-Mo-alloy fabricated by electron beam melting with the aid of shape optimization
30. A literature review of powder-based electron beam melting focusing on numerical simulations
31. Predicting the Microstructural Evolution of Electron Beam Melting of Alloy 718 with Phase-Field Modeling, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials
32. Satellite formation mechanism in gas atomized powders10.1179/pom.1999.42.1.70 ↗
33. Atomization simulation and preparation of 24CrNiMoY alloy steel powder using VIGA technology at high gas pressure10.1016/j.powtec.2020.04.030 ↗
34. Centrifugal granulation behavior in metallic powder fabrication by plasma rotating electrode process10.1038/s41598-020-75503-w ↗
35. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
36. On the role of powder flow behavior in fluid thermodynamics and laser processability of Ni-based composites by selective laser melting10.1016/j.ijmachtools.2018.10.006 ↗
37. DEM study to determine the relationship between particle velocity fluctuations and contact force disappearance10.1016/j.powtec.2017.03.022 ↗
38. Václav Šmilauer, Emanuele Catalano, Bruno Chareyre, Sergei Dorofeenko, Jerome Duriez, Nolan Dyck, Jan Elias, Burak Er, Alexander Eulitz, Anton Gladky, Ning Guo, Christian Jakob, Francois Kneib, Janek Kozicki, Donia Marzougui, Raphael Maurin, Chiara Modenese, Luc Scholtes, Luc Sibille, Janek Stransky, Thomas Sweijen, Klaus Thoeni, Chao Yuan, Yade Documentation 2nd ed. The Yade Project., (2015). https://doi.org/10.5281/zenodo.34073.
39. Hierarchical effects of multi-layer powder spreading in the electron beam powder bed fusion additive manufacturing of pure tungsten material
40. D. Dai, D. Gu, Q. Ge, C. Ma, X. Shi, H. Zhang, Thermodynamics of molten pool predicted by computational fluid dynamics in selective laser melting of Ti6Al4V: Surface morphology evolution and densification behavior, CMES - Computer Modeling in Engineering and Sciences. 124 (2020) 1085–1098. https://doi.org/10.32604/cmes.2020.010927.10.32604/cmes.2020.010927 ↗
41. Inc. FlowScience, FLOW-3D® Version 11.2 [Computer software], (2017). https://www.flow3d.com.
42. Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy
43. Role of operating and environmental conditions in determining molten pool dynamics during electron beam melting and selective laser melting
44. Imaging transient solidification behavior10.1557/mrs.2020.273 ↗
45. MICRESS® - The MICRostructure Evolution Simulation Software, (n.d.).
46. A phase field concept for multiphase systems10.1016/0167-2789(95)00298-7 ↗
47. Branching-induced grain boundary evolution during directional solidification of columnar dendritic grains10.1016/j.actamat.2017.07.002 ↗
48. Microstructure modelling of laser metal powder directed energy deposition of alloy 718
49. Comprehensive study on mechanisms for grain morphology evolution and texture development in powder bed fusion with electron beam of Co–Cr–Mo alloy10.1016/j.mtla.2019.100346 ↗
50. A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel
51. Revealing competitive columnar grain growth behavior and periodic microstructural banding in additively manufactured Ti-6Al-4 V parts by selective electron beam melting10.1016/j.mtla.2019.100365 ↗
52. Alkeland · 2004
53. Effects of sigma phase and carbide on the wear behavior of CoCrMo alloys in Hanks’ solution10.1016/j.wear.2013.12.010 ↗
54. Powder bed properties modelling and 3D thermo-mechanical simulation of the additive manufacturing Electron Beam Melting process
55. Nanometer-scale precipitations in a selective electron beam melted nickel-based superalloy10.1016/j.scriptamat.2020.113661 ↗
56. Modelling energy source and powder properties for the development of a thermal FE model of the EBM additive manufacturing process
57. Revisiting solidification microstructure selection maps in the frame of additive manufacturing
58. Determination of crystal growth rates during rapid solidification of polycrystalline aluminum by nano-scale spatio-temporal resolution in situ transmission electron microscopy10.1063/1.4960443 ↗
59. Quantitative texture prediction of epitaxial columnar grains in additive manufacturing using selective laser melting
60. The prediction of the emissivity and thermal conductivity of powder beds10.1080/02726350490501682a ↗
61. Effect of particle size distribution on the packing of powder beds: A critical discussion relevant to additive manufacturing
62. Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing10.1016/J.ENG.2017.05.012 ↗