journal article·2017-04

3D soft auxetic lattice structures fabricated by selective laser sintering: TPU powder evaluation and process optimization

Shangqin Yuan, Fei Shen, Jiaming Bai, Chee Kai Chua, Jun Wei, Kun Zhou

Materials & Design· Volume 120
Publisher page

Abstract

Abstract The auxetic foams composed of highly porous thermoplastic polyurethane (TPU) exhibit an attractive behaviour of withstanding a large volume reduction upon the cyclic compressive loading. A family of three-dimensional (3D) artificial metamaterials via Bucklicrystals consisting of an array of elastomeric spherical shells with periodical lattice patterns were proposed to mimic the buckling-induced auxetic behaviour as TPU foams. Layer-by-layer deposition of the desirable materials to manufacture parts known as additive manufacturing enables to create complex geometries and provides the broad freedom in design and manufacturing. In this work, selective laser sintering offered a unique capability to fabricate tailorable and flexible 3D soft metamaterials using TPU powders. An effective method was proposed to systematically evaluate the TPU powders and optimize the fabrication process, in order to overcome the challenges of sintering the duel-segment TPU. The laser-sintered Bucklicrystals were highly recoverable undergoing repeated compressions, and they retained the auxetic properties over a wide range of applied deformations. The fabrication of 3D soft metamaterials is not constrained by existing manufacturing principles and the laser-sintered Bucklicrystals of TPU are highly valuable to various engineering applications, such as mechanical and acoustic energy absorbers, actuators and vibration-resistant dampers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Pickering emulsions and particle stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Chua · 2014
2. Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects10.1023/B:JMSM.0000046393.81449.a5 ↗
3. 3D printing of smart materials: a review on recent progresses in 4D printing
4. Bone-derived CAD library for assembly of scaffolds in computer-aided tissue engineering
5. Extrusion-based additive manufacturing of PEEK for biomedical applications
6. 3D printing by selective laser sintering of polypropylene feed channel spacers for spiral wound membrane modules for the water industry
7. Experimental investigations on fused deposition modelling of polymer-layered silicate nanocomposite
8. 3D soft metamaterials with negative Poisson's ratio10.1002/adma.201301986 ↗
9. Designable dual-material auxetic metamaterials using three-dimensional printing10.1016/j.matdes.2014.11.033 ↗
10. Harnessing instabilities for design of soft reconfigurable auxetic/chiral materials10.1039/c3sm51148k ↗
11. Directing the deformation paths of soft metamaterials with prescribed asymmetric units10.1002/adma.201500716 ↗
12. Binding mechanisms in selective laser sintering and selective laser melting10.1108/13552540510573365 ↗
13. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
14. Cosserat elasticity of negative Poisson's ratio foam: experiment10.1088/0964-1726/25/5/054004 ↗
15. Negative Poisson's ratios as a common feature of cubic metals10.1038/32842 ↗
16. Interlocking assembled 3D auxetic cellular structures10.1016/j.matdes.2016.03.088 ↗
17. Hierarchical honeycomb auxetic metamaterials10.1038/srep18306 ↗
18. Quasi-static characterisation and impact testing of auxetic foam for sports safety applications10.1088/0964-1726/25/5/054014 ↗
19. Soft actuation of structured cylinders through auxetic behavior10.1002/adem.201400433 ↗
20. Mechanical metamaterials with negative compressibility transitions10.1038/nmat3331 ↗
21. Topology optimized architectures with programmable Poisson's ratio over large deformations10.1002/adma.201502485 ↗
22. A simple auxetic tubular structure with tuneable mechanical properties10.1088/0964-1726/25/6/065012 ↗
23. Chiral three-dimensional isotropic lattices with negative Poisson's ratio10.1002/pssb.201600055 ↗
24. Effect of surface orientation on the tribological properties of laser sintered polyamide 1210.1016/j.polymertesting.2015.09.017 ↗
25. Improving the mechanical properties of laser-sintered polyamide 12 through incorporation of carbon nanotubes10.1002/pen.23459 ↗
26. Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering10.1016/j.polymertesting.2014.03.012 ↗
27. Material evaluation and process optimization of CNT-coated polymer powders for selective laser sintering10.3390/polym8100370 ↗
28. Investigation and development of large-scale equipment and high performance materials for powder bed laser fusion additive manufacturing
29. Characterization of polyurethane shape memory polymer processed by material extrusion additive manufacturing
30. Mechanically programmed shape change in laminated elastomeric composites10.1039/C5SM01004G ↗
31. Vibration transmissibility and damping behaviour for auxetic and conventional foams under linear and nonlinear regimes10.1088/0964-1726/22/8/084010 ↗
32. Study into the recyclability of a thermoplastic polyurethane powder for use in laser sintering
33. New heat flux DSC measurement technique
34. Methods for quantifying the stable sintering region in laser sintered polyamide-1210.1002/pen.23386 ↗
35. Characterization of creeping and shape memory effect in laser sintered thermoplastic polyurethane10.1115/1.4034032 ↗
36. Predicting processing parameters in High Temperature Laser Sintering (HT-LS) from powder properties10.1016/j.matdes.2016.04.097 ↗
37. Laser sintering of polyamides and other polymers10.1016/j.pmatsci.2011.04.001 ↗
38. Frenkel's theory of sintering10.2298/SOS0601007R ↗
39. Interpretation of Frenkel's theory of sintering considering evolution of activated pores: I. Confirmation of the time constant10.2298/SOS1402141Y ↗
40. Energy absorption of thermoplastic polyurethane lattice structures via 3D printing: modeling and prediction10.1142/S1758825116400068 ↗