journal article·2018-12Open access

Microstructure based modeling of deformation and failure of spot-welded advanced high strength steels sheets

K. Paveebunvipak, V. Uthaisangsuk

Materials & Design· Volume 160

Abstract

Microstructures and hardness of different weld zones of spot-welded high strength steel grade 1000 and press-hardened 22MnB5 steel were characterized. Tensile shear and cross tension test of welded specimens were conducted, in which load responses and fracture developments were identified. Then, samples with microstructures of each weld zone in all examined joints were generated by specific heat treatment processes. 2D representative volume elements (RVEs) for these microstructures were modelled. Flow stress curves of the individual phases were described by micromechanics based models under consideration of local chemical compositions and phase constituents. It was clearly shown that predicted overall stress-strain responses of all weld regions were well in accordance with the tensile test results of heat-treated samples. Furthermore, fracture criteria were determined for each weld zone by using samples having varying geometries for a wide range of stress triaxialities along with the digital image correlation technique. Finally, FE simulations of the tensile shear and cross tension tests of all investigated joints were carried out, in which the obtained flow stress curves and fracture criteria were defined for the individual weld regions. The experimental force-displacement curves up to fracture and observed failure occurrences could be correctly described by the simulation results.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. E. Thomson, American Philosophical Society, 1865-1944, PA 19106-3386.
2. Rajalakshmi · 2017
3. Tensile strength and failure simulation of simplified spot weld models10.1016/j.matdes.2013.08.070 ↗
4. Influence of microstructure and weld size on the mechanical behavior of dissimilar AHSS resistance spot welds10.1179/136217108X325470 ↗
5. Spot weld modeling with implemented rupture criteria
6. A review on hot stamping10.1016/j.jmatprotec.2010.07.019 ↗
7. Dual-phase steels microstructure and properties consideration based on artificial intelligence techniques10.1016/j.acme.2013.10.002 ↗
8. Hardening characteristics of CO2 laser welds in advanced high strength steel10.1007/s12540-012-3014-2 ↗
9. Micromechanics-based modeling of stress-strain and fracture behavior of heat-treated boron steels for hot stamping process10.1016/j.msea.2016.04.065 ↗
10. Setting mechanical properties of high strength steels for rapid hot forming processes10.3390/ma9040229 ↗
11. Effect of boron content and welding current on the mechanical properties of electrical resistance spot welds in complex-phase steels10.1016/j.matdes.2013.08.098 ↗
12. Resistance spot weldability of galvanize coated and uncoated TRIP steels10.3390/met6120299 ↗
13. Microstructure and mechanical properties of resistance spot welded advanced high strength steels10.2320/matertrans.MRA2008031 ↗
14. Effect of work hardening on mechanical behavior of resistance spot welding joint during tension shear test10.1016/j.matdes.2016.03.120 ↗
15. Critical review of automotive steels spot welding: process, structure and properties10.1179/1362171813Y.0000000120 ↗
16. Study on the nugget growth in single-phase AC resistance spot welding based on the calculation of dynamic resistance10.1016/j.jmatprotec.2015.10.006 ↗
17. Effects of process parameters on spot welding of TRIP and quenching and partitioning steels
18. Deformation behavior of spot-welded high strength steels for automotive applications10.1016/j.msea.2010.07.091 ↗
19. Micro-macro-characterization and modeling of mechanical properties of gas metal arc welded (GMAW) DP600 steel10.1016/j.msea.2013.09.056 ↗
20. Predicting resistance spot weld failure modes in shear tension tests of advanced high-strength automotive steels
21. Failure analysis of dissimilar thickness resistance spot welded joints in dual-phase steels during tensile shear test10.1016/j.matdes.2013.09.040 ↗
22. Simple and effective failure analysis of dissimilar resistance spot welded advanced high strength steel sheets10.1016/j.ijmecsci.2016.12.006 ↗
23. Plasticity and fracture modeling of the heat-affected zone in resistance spot welded tailor hardened boron steel10.1016/j.jmatprotec.2016.03.026 ↗
24. A finite element model for the prediction of advanced high strength steel spot welds fracture10.1016/j.engfracmech.2012.03.004 ↗
25. Predicting failure response of spot welded joints using recent extensions to the Gurson model10.1016/j.commatsci.2009.12.004 ↗
26. HAZ microstructures and local mechanical properties of high strength steels resistance spot welds10.2355/isijinternational.51.99 ↗
27. A study on heat affected zone softening in resistance spot welded dual phase steel by nanoindentation10.1007/s10853-009-4141-0 ↗
28. Work-hardening of ferrite and microstructure-based modeling of its mechanical behavior under tension10.1016/j.actamat.2008.05.023 ↗
29. Microstructure based flow stress modeling for quenched and tempered low alloy steel10.1016/j.matdes.2015.05.068 ↗
30. Precipitation strengthening produced by the formation in ferrite of Nb carbide
31. Characterization of microstructure and modeling of flow behavior of bainite-aided dual-phase steel10.1016/j.commatsci.2013.05.017 ↗
32. Practical failure analysis of resistance spot welded advanced high-strength steel sheets10.1016/j.ijplas.2016.10.010 ↗
33. Application of extended Mohr-Coulomb criterion to ductile fracture10.1007/s10704-009-9422-8 ↗
34. Damage initiation and fracture loci for advanced high strength steel sheets taking into account anisotropic behavior10.1016/j.jmatprotec.2017.05.035 ↗