journal article·2021-11Open access

Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing

Hunter B. Henderson, Joshua A. Hammons, Alexander A. Baker, Scott K. McCall, Tian T. Li, Aurélien Perron, Zachary C. Sims, Ryan T. Ott, Fanqiang Meng, Michael J. Thompson, David Weiss, Orlando Rios

Materials & Design· Volume 209

Abstract

Decreasing microstructural length scales to the nanoscale is a proven way of increasing strength, but the intrinsic metastability of such structures typically makes them susceptible to thermally activated coarsening. Recent advances in additive manufacturing permit bulk-nanostructured materials to be produced through rapid solidification, but like other metastable materials the as-built structures typically coarsen rapidly with even modest thermal exposure. Here, selective laser melting is employed to produce an Al-Ce-based alloy with high mechanical strength arising from the as-built microstructure, which can be controlled by build conditions. In addition, the alloy exhibits extreme resistance to thermal coarsening up to 400 °C and superior strength retention compared to conventional Al alloys after extended thermal exposure. The near-zero solubility of Ce in Al and potent solid solution strengthening of Mg enable this behavior without requiring heat treatment. This result demonstrates that combining insoluble alloying elements with additive manufacturing is a viable method of producing exceptionally stable bulk nanoscale alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Ultrahigh strength and high ductility of bulk nanocrystalline copper10.1063/1.2034122 ↗
2. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
3. Petch · J. Iron Steel Institute · 1953 · 174 · 25
4. In situ investigation of the microstructure evolution in nanocrystalline copper electrodeposits at room temperature10.1063/1.2401647 ↗
5. Unraveling the nature of room temperature grain growth in nanocrystalline materials10.1016/j.actamat.2008.04.051 ↗
6. Cerium-Based, Intermetallic-Strengthened Aluminum Casting Alloy: High-Volume Co-product Development10.1007/s11837-016-1943-9 ↗
7. C. Sims, Z. et al. High performance aluminum–cerium alloys for high-temperature applications, Mater. Horizons 4, 1070–1078 (2017).10.1039/C7MH00391A ↗
8. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
9. Evaluation of an Al-Ce alloy for laser additive manufacturing10.1016/j.actamat.2016.12.065 ↗
10. Primary solidification of ternary compounds in Al-rich Al–Ce–Mn alloys10.1016/j.jallcom.2020.156048 ↗
11. Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property10.1007/s10853-020-05037-z ↗
12. Enhanced mechanical performance via laser induced nanostructure formation in an additively manufactured lightweight aluminum alloy10.1016/j.apmt.2021.100972 ↗
13. Microstructure and properties of additively manufactured Al–Ce–Mg alloys10.1038/s41598-021-86370-4 ↗
14. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
15. Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves10.1016/j.msea.2009.06.031 ↗
16. Influence of specimen thickness with rectangular cross-section on the tensile properties of structural steels10.1016/j.msea.2011.11.021 ↗
17. XRDUA: crystalline phase distribution maps by two-dimensional scanning and tomographic (micro) X-ray powder diffraction10.1107/S1600576714008218 ↗
18. Micromechanics of deformation of metallic-glass–matrix composites from in situ synchrotron strain measurements and finite element modeling10.1016/j.actamat.2004.12.037 ↗
19. Self-consistent modelling of the plastic deformation of f.c.c. polycrystals and its implications for diffraction measurements of internal stresses10.1016/S1359-6454(98)00014-7 ↗
20. Ultra-Small-Angle X-ray Scattering Instrument at the Advanced Photon Source: History, Recent Development, and Current Status10.1007/s11661-012-1431-y ↗
21. The Absolute Calibration of a Small-Angle Scattering Instrument with a Laboratory X-ray Source10.1088/1742-6596/247/1/012005 ↗
22. Irena: tool suite for modeling and analysis of small-angle scattering10.1107/S0021889809002222 ↗
23. Nika: software for two-dimensional data reduction10.1107/S0021889812004037 ↗
24. Diffusion of cerium in the aluminium lattice10.1023/A:1018572803223 ↗
25. Reassessment of Al-Ce and Al-Nd binary systems supported by critical experiments and first-principles energy calculations10.1007/s11661-005-0001-y ↗
26. A comparison of Selective Laser Melting with bulk rapid solidification of AlSi10Mg alloy10.1016/j.jallcom.2018.01.309 ↗
27. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
28. Theory of Growth of Spherical Precipitates from Solid Solution10.1063/1.1698258 ↗
29. Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation10.1179/1743284714Y.0000000702 ↗