Anisotropy in the quasi-static and cyclic behavior of ZK60 extrusion: Characterization and fatigue modeling
Source abstract
Abstract
The quasi-static and strain-controlled fatigue characteristics of ZK60 extrusion have been investigated along three different directions: the extrusion direction (ED), the radial direction (RD), and 45° to the extrusion direction (45°). The quasi-static response showed symmetric behavior for the samples tested along RD and 45°, whereas the ED samples manifested completely asymmetric behavior. Although the ED samples exhibited longer fatigue lives than the RD and 45° in the high cycle fatigue, the fatigue lives in the low cycle fatigue regime were similar. The texture measurement indicated a sharp basal texture along ED, explaining its asymmetric behavior. Higher tensile mean stress and less dissipated plastic energy per cycle for the ED samples, acting as two competing factors, were the principal reasons for exhibiting fatigue responses identical to those of RD and 45° in the LCF regime. The fracture surface in the ED direction was dominated by twin lamellae and profuse twinned grains, whereas that in RD was dominated by slip bands. Finally, Smith-Watson-Topper and Jahed-Varvani models were employed to predict the fatigue lives along all directions using a single set of material parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Research for a ‘new age of magnesium’ in the automotive industry10.1016/S0924-0136(01)00780-4 ↗
2. Magnesium and its alloys applications in automotive industry10.1007/s00170-007-1279-2 ↗
3. Avedesian · 1999
4. Twinning characteristic in tension of magnesium alloys and its effect on mechanical properties10.1016/j.matdes.2016.06.073 ↗
5. Single and double twin nucleation, growth, and interaction in an extruded magnesium alloy10.1016/j.matdes.2017.01.072 ↗
6. Modelling twinning evolution during plastic deformation in hexagonal close-packed metals10.1016/j.matdes.2015.06.025 ↗
7. Low cycle fatigue of an extruded Mg-3Nd-0.2Zn-0.5Zr magnesium alloy10.1016/j.matdes.2014.07.016 ↗
8. Strain-controlled low cycle fatigue properties of a rare-earth containing ZEK100 magnesium alloy10.1016/j.matdes.2014.11.058 ↗
9. Effect of anisotropy on the low-cycle fatigue behavior of rolled AZ31 magnesium alloy10.1016/j.msea.2009.08.044 ↗
10. Fatigue properties of rolled magnesium alloy (AZ31) sheet: influence of specimen orientation10.1016/j.ijfatigue.2010.10.013 ↗
11. Anisotropy of the fatigue behavior of extruded and rolled magnesium alloys10.1016/j.ijfatigue.2012.02.011 ↗
12. Uniaxial cyclic deformation and fatigue behavior of AM50 magnesium alloy sheet metals under symmetric and asymmetric loadings10.1016/j.matdes.2014.12.056 ↗
13. Effects of Mn content and texture on fatigue properties of as-cast and extruded AZ61 magnesium alloys10.1016/j.ijmecsci.2005.09.003 ↗
14. Investigation of fatigue anisotropy in an extruded magnesium alloy10.1016/j.ijfatigue.2013.01.006 ↗
15. Role of loading direction on cyclic behaviour characteristics of AM30 extrusion and its fatigue damage modelling10.1016/j.msea.2016.05.116 ↗
16. Anisotropic cyclic deformation behavior of extruded ZA81M magnesium alloy10.1016/j.ijfatigue.2016.11.020 ↗
17. Cyclic deformation and fatigue of rolled AZ80 magnesium alloy along different material orientations10.1016/j.msea.2016.09.031 ↗
18. Effect of Nd and Y on the microstructure and mechanical properties of ZK60 alloy10.1016/j.msea.2006.04.028 ↗
19. Fatigue of ZK60 magnesium alloy under uniaxial loading10.1016/j.ijfatigue.2014.02.019 ↗
20. An experimental study of cyclic plastic deformation of extruded ZK60 magnesium alloy under uniaxial loading at room temperature10.1016/j.ijplas.2013.07.008 ↗
21. An experimental study on cyclic deformation and fatigue of extruded ZK60 magnesium alloy10.1016/j.ijfatigue.2011.08.016 ↗
22. Twinning-detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A10.1016/j.actamat.2007.10.030 ↗
23. Deformation of extruded ZK60 magnesium alloy under uniaxial loading in different material orientations10.1016/j.msea.2017.10.059 ↗
24. A theory for fatigue failure under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
25. Evaluation and comparison of several multiaxial fatigue criteria10.1016/S0142-1123(03)00110-5 ↗
26. Multiaxial high-cycle fatigue criterion for hard metals10.1016/S0142-1123(00)00075-X ↗
27. New energy-critical plane parameter for fatigue life assessment of various metallic materials subjected to in-phase and out-of-phase multiaxial fatigue loading conditions10.1016/S0142-1123(00)00002-5 ↗
28. Energy criteria of multiaxial fatigue failure10.1046/j.1460-2695.1999.00220.x ↗
29. A comparative study of multiaxial high-cycle fatigue criteria for metals10.1016/S0142-1123(96)00064-3 ↗
30. Critical plane approaches for multiaxial fatigue damage assessment
31. Bannantine · 1991 · 213
32. Multiaxial fatigue: a survey of the state of the art10.1520/JTE11553J ↗
33. The influence of state of stress on low-cycle fatigue of structural materials
34. An experimental study of fatigue crack propagation in extruded AZ31B magnesium alloy10.1016/j.ijfatigue.2012.08.010 ↗
35. Upper and lower fatigue life limits model using energy-based fatigue properties10.1016/j.ijfatigue.2005.07.039 ↗
36. Fatigue characteristics and modeling of cast and cast-forged ZK60 magnesium alloy
37. An energy-based fatigue life assessment model for various metallic materials under proportional and non-proportional loading conditions10.1016/j.ijfatigue.2006.07.017 ↗
38. A new approach to the evaluation of fatigue under multiaxial loadings10.1115/1.3224982 ↗
39. Cyclic behaviour of wrought magnesium alloy under multiaxial load10.1016/j.ijfatigue.2011.01.009 ↗
40. A stress-strain function for the fatigue of metals (Stress-strain function for metal fatigue including mean stress effect)
41. Effect of forging on the low cycle fatigue behavior of cast AZ31B alloy10.1016/j.msea.2017.08.086 ↗
42. ASTM and ASTM Int · 2016 · C · 1
43. Effect of initial texture on fatigue properties of extruded ZK60 magnesium alloy
44. Twinning and Detwinning during cyclic deformation of Mg alloy AZ31B10.4028/www.scientific.net/MSF.539-543.3407 ↗
45. What is in a strain hardening ‘Plateau’?
46. Strain gradient plasticity: theory and experiment10.1016/0956-7151(94)90502-9 ↗
47. In-situ neutron diffraction and acoustic emission investigation of twinning activity in magnesium10.1088/1742-6596/340/1/012096 ↗
48. Modeling the effect of twinning and detwinning during strain-path changes of magnesium alloy AZ3110.1016/j.ijplas.2008.05.005 ↗
49. Fatigue damage development in pure polycrystalline magnesium under cyclic tension-compression loading10.1016/j.msea.2011.06.064 ↗
50. Microstructure, texture and mechanical behavior characterization of hot forged cast ZK60 magnesium alloy10.1016/j.jmst.2017.04.004 ↗
51. The different effects of twin boundary and grain boundary on reducing tension-compression yield asymmetry of Mg alloys
52. Role of twinning and slip in cyclic deformation of extruded mg-3%Al-1%Zn alloys10.1016/j.scriptamat.2010.08.008 ↗
53. Crack initiation mechanism of extruded AZ31 magnesium alloy in the very high cycle fatigue regime10.1016/j.msea.2008.02.003 ↗
54. Multiaxial effects on LCF behaviour and fatigue failure of AZ31B magnesium extrusion10.1016/j.ijfatigue.2014.01.025 ↗
55. Fatigue life and early cracking predictions of extruded AZ31B magnesium alloy using critical plane approaches10.1016/j.ijfatigue.2016.04.002 ↗
56. Influence of loading direction on the anisotropic fatigue properties of rolled magnesium alloy10.1016/j.ijfatigue.2016.01.026 ↗
57. Fatigue of extruded AZ31B magnesium alloy under stress- and strain-controlled conditions including step loading10.1016/j.mechmat.2017.03.002 ↗
58. Tensile and fatigue behaviour of as-forged AZ31B extrusion10.3221/IGF-ESIS.38.34 ↗