The effect of pre-existing voids on solder reliability at different thermomechanical stress Levels: Experimental assessment
Source abstract
Abstract
After lead-free technology, pre-existing voids in Power-MOSFET device solder connections have been a hot topic. Previous studies have examined the mechanical performance of solders with manufacturing-induced voids typically by generating excessive voids intentionally using simulation analysis without/insufficient experimental results. Electronic assembly standards such as IEC 61191-2, J-STD-001G, and IPC-A-610G do not cover voiding due to conflicting opinions and insufficient experimental evidence. In this context, comprehensive experimental results are needed to verify simulation results and assist in setting the standard. Silicon-based Power MOSFET packages with different locations, sizes, and patterns of pre-existing voids with nearly the same percentage of voids (30-33%) have been chosen to address this critical issue. The Power MOSFET test samples underwent power cycling-based accelerated degradation testing at various stress levels and monitored the location and rate of solder degradation at specific time intervals. It is found that small dispersive voids in solder life are useful, but clusters can accelerate damage propagation. Contrary, large dispersive voids at the edges initiate solder damage, reducing solder life. Our experimental investigation findings indicate that pre-existing voids' positions, sizes, and patterns should be considered when establishing solder void inspection standards. This would improve power devices' reliability for end-user power supply and control.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Silicon Carbide Semiconductor Technologies · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. 2D semimetal with ultrahigh work function for sub-0.1 V threshold voltage operation of metal-semiconductor field-effect transistors
2. Mechanical properties of sintered Ag–Cu die-attach nanopaste for application on SiC device10.1016/j.matdes.2014.07.033 ↗
3. Recent review on failures in silicon carbide power MOSFETs10.1016/j.microrel.2021.114169 ↗
4. Degradation Diagnosis of Power Module Based on Frequency Characteristics in Heat Flow10.1109/TPEL.2023.3274756 ↗
5. B. Kilian, J. Gleichauf, Y. Maniar, O. Wittler, and M. Schneider-Ramelow, “Finite Element-Based Monitoring of Solder Degradation in Discrete SiC MOSFETs,” in 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2023: IEEE, pp. 1-8.10.1109/EuroSimE56861.2023.10100794 ↗
6. Research on the mechanical and performance effects of flux on solder layer interface voids10.1007/s11664-021-09157-3 ↗
7. Materials modification of the lead-free solders incorporated with micro/nano-sized particles: A review10.1016/j.matdes.2020.109224 ↗
8. Thermally stable high temperature die attach solution10.1016/j.matdes.2015.10.074 ↗
9. Flux effect on void quantity and size in soldered joints10.1016/j.microrel.2016.03.009 ↗
10. Voids in solder joints
11. U. Welzel and N. Holle, “Voids in SMT Solder Joints–Trends in Automotive Electronics.”.
12. Subbarayan · 2007
13. Numerical assessment of the effect of void morphology on thermo-mechanical performance of solder thermal interface material10.1016/j.applthermaleng.2013.12.006 ↗
14. Effect of thermal cycle loadings on mechanical properties and thermal conductivity of a porous lead-free solder joint10.1109/TCPMT.2018.2861777 ↗
15. Effects of voids on mechanical and thermal properties of the die attach solder layer used in high-power LED chip-scale packages10.1109/TCPMT.2018.2789345 ↗
16. Anisotropic highly conductive joints utilizing Cu-solder microcomposite structure for high-temperature electronics packaging10.1016/j.matdes.2022.111204 ↗
17. Effect of process-induced voids on isothermal fatigue resistance of CSP lead-free solder joints10.1016/j.microrel.2007.08.008 ↗
18. Effect of voids on the reliability of BGA/CSP solder joints10.1016/S0026-2714(03)00124-0 ↗
19. D. Hillman, D. Adams, T. Pearson, B. Williams, B. Petrick, R. Wilcoxon, D. Bernard, J. Travis, E. Krastev, and V. Bastin, “The last will and testament of the BGA void,” in Proceedings of SMTA International, 2011, pp. 163-177.
20. M. Pilkington. “Are Voids in Solder Joints Really an Issue?” https://www.eptac.com/blog/are-voids-in-solder-joints-really-an-issue (accessed 05 June, 2023).
21. IEC 61191-2, Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies, IEC, 2017.
22. J-std-001g, · 2018
23. Acceptability of Electronic Assemblies
24. D. Peck, “The analysis of data from accelerated stress tests,” in 9th Reliability Physics Symposium, 1971: IEEE, pp. 69-78.10.1109/IRPS.1971.362495 ↗
25. Effects of die-attach voids on the thermal impedance of power electronic packages10.1109/TCPMT.2017.2742467 ↗
26. Measuring partial thermal resistances in a heat-flow path10.1109/TCAPT.2002.808003 ↗
27. Methods for the separation of failure modes in power-cycling tests of high-power transistor modules using accurate voltage monitoring10.3390/en13112718 ↗
28. D. Johnson, P.-W. Hsu, C. Xi, and N. Asadizanjani, “Scanning Acoustic Microscopy Package Fingerprint Extraction for Integrated Circuit Hardware Assurance,” in ISTFA 2021, 2021: ASM International, pp. 59-64.10.31399/asm.cp.istfa2021p0059 ↗
29. J. Lau, S. Erasmus, and S. Pan, “Effects of voids on bump chip carrier (BCC++) solder joint reliability,” in 52nd Electronic Components and Technology Conference 2002.(Cat. No. 02CH37345), 2002: IEEE, pp. 992-1000.10.1109/ECTC.2002.1008222 ↗
30. L. J. Ladani and A. Dasgupta, “Damage initiation and propagation in voided joints: modeling and experiment,” 2008.10.1115/1.2837562 ↗
31. Stress concentrations near holes10.1007/BF00886530 ↗