journal article·2024-10Open access

Improved thermal shock reliability of Ag paste sintered joint by adjusted coefficient of thermal expansion with Ag-Si atomized particles addition

Wangyun Li, Chuantong Chen, Masahiko Nishijima, Minoru Ueshima, Hiroshi Nishikawa, Katsuaki Suganuma

Materials & Design· Volume 246

Abstract

• Atomized Ag-20 wt%Si and Ag-50 wt%Si particles are fabricated and added to Ag paste. • The CTE reduction intensifies with increasing Ag-Si particle content. • Both microstructure and shear strength were improved with increasing Ag-Si particle content. • The retention ratio of shear strength of AS20-30 after 1000 cycles was 102.3%. • Optimized prominent die attach materials for power electronics are obtained. In this study, two kinds of atomized Ag-20 wt%Si and Ag-50 wt%Si particles are fabricated and added to Ag paste to fabricate composite pastes to achieve a low coefficient of thermal expansion (CTE), and their performance stability in SiC power module is evaluated under thermal shock from −50 to 250 °C. Four kinds of composite Ag pastes using the two kinds of atomized Ag-Si addition with 10 % and 30 % were obtained, AS20-10, AS50-10, AS20-30 and AS50-30, respectively. The results show that the CTE reduction intensifies with increasing Ag-Si atomized particle content. The retention ratio of shear strength of AS20-30 sintered joint after 1000 cycles was 102.3 %, which means the shear strength did not decrease during so harsh thermal shock test. The mechanism was discussed in detail. In addition, the properties such as thermal conductivity and electrical conductivity for the composite pastes were also evaluated to gain a more comprehensive understanding for the new materials especially for the design of SiC power modules with a long-time life. Comprehensively considering the material parameters of the composite pastes and the reliability of the sintered joints under thermal shock, the optimized composite pastes as die attach material in power electronics are obtained. The findings should be inspiring in developing novel die attach materials for high reliable interconnections in SiC power modules.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. A comprehensive overview of power converter applied in high-power wind turbine: Key challenges and potential solutions10.1109/TPEL.2023.3234221 ↗
2. Thermal characteristic of sintered Ag-Cu nanopaste for high-temperature die-attach application10.1016/j.ijthermalsci.2014.08.022 ↗
3. Materials for advanced packaging
4. Thermal stress reduction strategy for high-temperature power electronics with Ag sintering10.1016/j.microrel.2021.114379 ↗
5. Reliability improvement of low-temperature sintered nano-silver as die attachment by porosity optimization10.1109/TCPMT.2023.3299291 ↗
6. K, Suganuma, Thermal stability improvement of sintered Ag die-attach materials by addition of transition metal compound particles10.1063/1.5094073 ↗
7. Reliability-enhanced microscale Ag sintered joint doped with AlN nanoparticles10.1016/j.matlet.2023.134845 ↗
8. Thermal conductivity and reliability reinforcement for sintered microscale Ag particle with AlN nanoparticles additive10.1016/j.matchar.2023.113150 ↗
9. Reducing migration of sintered Ag for power devices operating at high temperature10.1109/TPEL.2020.2994343 ↗
10. Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: experiment validation and numerical simulation10.1016/j.compositesb.2024.111519 ↗
11. Thermal expansion behaviors of yttrium tungstates in the WO3-Y2O3 system10.1016/j.ceramint.2013.04.024 ↗
12. Thermal expansion anisotropy, microcracking and acoustic emission of Nb2O5 ceramics10.1016/0272-8842(92)90103-K ↗
13. An assessment of wide bandgap semiconductors for power devices10.1109/TPEL.2003.810840 ↗
14. Thermal expansion and lattice parameters of group IV semiconductors10.1016/S0254-0584(96)01808-1 ↗
15. Fabrication of controlled expansion Al-Si composites by pressureless and spark plasma sintering10.1016/j.apt.2018.09.024 ↗
16. Analysis and modeling of thermomechanically improved silver-sintered die-attach layers modified by additives10.1109/TCPMT.2011.2167154 ↗
17. M. Ueshima, M. Haga, T. Mototsuji, Y. Isono, Ag and Si particles sintering technology for SiC power device, International Microelectronics Assembly and Packaging Society, organizer, Proceedings of the 22nd European Microelectronics and Packaging Conference & Exhibition, 2019 Sept. 16-19, Pisa, Italy, p. 1-5, https://doi.org/10.23919/EMPC44848.2019.8951857.10.23919/EMPC44848.2019.8951857 ↗
18. Improved thermal conductivity and reliability through graphene reinforced nanopaste for power devices in new energy vehicles10.1109/TCPMT.2023.3339686 ↗
19. Interface regulation of micro-sized sintered Ag-10Al composite based on in-situ surface modification and enhanced microstructure stability in power electronic packaging10.1016/j.matdes.2024.112863 ↗
20. Process optimization, microstructure characterization and thermal properties of mesophase pitch-based carbon fiber reinforced aluminum matrix composites fabricated by vacuum hot pressing10.1016/j.compositesb.2021.108746 ↗
21. K. Kazybek, A. Perveen, Atomization processes of metal powders for 3D printing, Materials today: Proceedings, 26 (2020) 1727-1733, https://doi.org/10.1016/j.matpr.2020.02.364.10.1016/j.matpr.2020.02.364 ↗
22. Development of high thermal conductivity of Ag/diamond composite sintering paste and its thermal shock reliability evaluation in SiC power modules10.1016/j.jmrt.2023.07.254 ↗
23. Development of crack-less and deformation-resistant electroplated Ni/electroless Ni/Pt/Ag metallization layers for Ag-sintered joint during a harsh thermal shock10.1016/j.matdes.2022.111389 ↗
24. Influence of thermal exposure upon mechanical/electrical properties and microstructure of sintered micro-porous silver10.1016/j.microrel.2018.07.048 ↗
25. Simultaneous synthesis of nano and micro-Ag particles and their application as a die-attachment materialm
26. Determination of the local thermal diffusivity of inhomogeneous samples by a modified laser-flash method10.1007/s10765-007-0161-7 ↗
27. Thermal boundary resistance10.1103/RevModPhys.61.605 ↗
28. Remarkable thermal conductivity reduction in metal-semiconductor nanocomposites
29. Thermal boundary conductance across metal-nonmetal interfaces: effects of electron-phonon coupling both in metal and at interface10.1140/epjb/e2015-50771-8 ↗
30. Specific heat, thermal diffusivity, and thermal conductivity of Ag-Si alloys within a wide temperature range of 293–823 K10.1016/j.jpcs.2021.109997 ↗
31. Wiedemann-Franz law at boundaries10.1063/1.123420 ↗
32. Grain size effects on the fatigue response of nanocrystalline metals10.1016/S1359-6462(03)00393-2 ↗
33. Effect of annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4V10.1007/s11665-017-2710-y ↗
34. Pressureless and low-temperature sinter-joining on bare Si, SiC and GaN by a Ag Flake Paste10.1016/j.scriptamat.2021.113833 ↗
35. Addition of SiC particles to Ag die-attach paste to improve high-temperature stability; grain growth kinetics of sintered porous Ag10.1007/s11664-015-3919-x ↗
36. Effect of SiC reinforcement on the reliability of Ag nanoparticle paste for high-temperature applications10.1007/s10854-018-0514-y ↗
37. Analysis of the formation mechanism of coarse-dense structure of silver paste in die bonding10.1016/j.apt.2021.04.016 ↗
38. Improved thermal cycling reliability of Ag sinter joining by optimized chip mounting speed and push depth10.1007/s10854-021-06513-1 ↗