journal article·2020-03Open access

Experimental study and crystal plasticity finite element simulations of nano-indentation-induced lattice rotation and the underlying mechanism in TC6 single α-grain

Yu Zhou, Qunbo Fan, Xin Liu, Duoduo Wang, Xinjie Zhu

Materials & Design· Volume 188

Abstract

A Berkovich indentation test was performed in a single primary α-phase grain of an equiaxed TC6 titanium alloy, to reveal the complex local lattice-rotation process under nano-indentation loading. Numerical simulations using an in-house-developed crystal plasticity finite element method code were also conducted. A high-resolution inverse pole figure of a slice across the nano-indention was obtained via the focused ion beam technique coupled with precession electron diffraction. The simulation results corresponded closely to the experimental observations. In the slice, the region beneath the indentation inner-edge and the region beneath the indentation facet underwent the greatest degree and the second-greatest degree of lattice rotation, respectively. In contrast, for the region directly below the indentation center, the lattice rotated first, but the orientation changed only slightly during the entire process. The bright field transmission electron microscopy and the geometrically necessary dislocation densities provided experimental confirmation of such orientation features. Furthermore, the nucleation and continuous growth process of subgrains was numerically predicted by virtually tracking the misorientation angle (>10°) map at different indentation depths in three-dimensional space. Thereafter, the evolution of each slip system type was captured at typical local regions of the indentation, leading to an in-depth understanding of the underlying mechanism.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Gross slip fretting wear of CrCN, TiAlN, Ni, and CuNiIn coatings on Ti6Al4V interfaces10.1016/j.wear.2006.12.085 ↗
2. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
3. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
4. Cuddihy · 2016
5. A systematic study of hcp crystal orientation and morphology effects in polycrystal deformation and fatigue10.1098/rspa.2007.1833 ↗
6. Effects of working, heat treatment, and aging on microstructural evolution and crystallographic texture of alpha, alpha′, alpha″ and beta phases in Ti-6Al-4V wire10.1016/j.msea.2004.09.072 ↗
7. Orientation dependent spheroidization response and macro-zone formation during sub beta-transus processing of Ti-6Al-4V alloy10.1016/j.actamat.2017.04.071 ↗
8. Effect of heat treatment on the crystallographic orientation evolution in a near-alpha titanium alloy Ti6010.1016/j.actamat.2017.04.007 ↗
9. Investigation the effect of strain history on crystallographic texture evolution based on the perspective of macro deformation for high speed machining Ti-6Al-4V10.1016/j.matchar.2017.07.017 ↗
10. Local deformation mechanisms of two-phase Ti alloy10.1016/j.msea.2015.09.016 ↗
11. Sliding of coherent twin boundaries
12. History-independent cyclic response of nanotwinned metals10.1038/nature24266 ↗
13. Determination of hardness and elastic modulus inverse pole figures of a polycrystalline commercially pure titanium by coupling nanoindentation and EBSD techniques10.1016/j.msea.2014.06.098 ↗
14. Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions10.1016/j.jallcom.2016.09.123 ↗
15. Microstructure evolution and superelastic behavior in Ti-35Nb-2Ta-3Zr alloy processed by friction stir processing10.1016/j.actamat.2017.03.079 ↗
16. Deformation mechanisms in surface nano-crystallization of low elastic modulus Ti6Al4V/Zn composite during severe plastic deformation10.1016/j.scriptamat.2018.08.007 ↗
17. A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys10.1016/j.jallcom.2016.02.146 ↗
18. Quantifying deformation processes near grain boundaries in α titanium using nanoindentation and crystal plasticity modeling10.1016/j.ijplas.2016.08.007 ↗
19. A comparative study on the microstructure and mechanical behavior of titanium: ultrafine grain vs. coarse grain10.1016/j.msea.2016.05.093 ↗
20. Residual elastic stress-strain field and geometrically necessary dislocation density distribution around nano-indentation in TA15 titanium alloy10.1016/S1003-6326(13)62422-X ↗
21. On the formation mechanisms, spatial resolution and intensity of backscatter Kikuchi patterns10.1016/j.ultramic.2006.08.007 ↗
22. Interfacial orientation and misorientation relationships in nanolamellar Cu/Nb composites using transmission-electron-microscope-based orientation and phase mapping10.1016/j.actamat.2013.10.046 ↗
23. Electron backscatter diffraction of grain and subgrain structures - resolution considerations10.1046/j.1365-2818.1999.00579.x ↗
24. A stable multiply twinned decahedral gold nanoparticle with a barrel-like shape10.1016/j.susc.2015.09.015 ↗
25. Automated crystal orientation and phase mapping in TEM10.1016/j.matchar.2014.08.010 ↗
26. Development and application of a novel precession electron diffraction technique to quantify and map deformation structures in highly deformed materials-as applied to ultrafine-grained titanium10.1016/j.actamat.2014.06.063 ↗
27. In situ nitrided titanium alloys: microstructural evolution during solidification and wear10.1016/j.actamat.2014.09.026 ↗
28. Enhanced gradient crystal-plasticity study of size effects in a beta-titanium alloy10.1088/1361-651X/aa5ce3 ↗
29. Determination of the single-phase constitutive relations of α/β dual phase TC6 titanium alloy10.1016/j.msea.2016.08.057 ↗
30. Li · 2017
31. Olaf · 2009 · 40
32. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
33. A study of active deformation systems in titanium alloys: dependence on alloy composition and correlation with deformation texture10.1016/S0921-5093(02)00421-5 ↗
34. Residual elastic stress-strain field and geometrically necessary dislocation density distribution around nano-indentation in TA15 titanium alloy10.1016/S1003-6326(13)62422-X ↗
35. The effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations
36. Crystallographic aspects of geometrically- necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
37. Observations of lattice curvature near the interface of a deformed aluminium bicrystal10.1080/01418610008212038 ↗
38. Mechanical characterization of highly porous inorganic solids materials by instrumented micro-indentation10.1016/j.actamat.2013.07.005 ↗
39. Finite element analysis of spherical indentation to study pile-up/sink-in phenomena in steels and experimental validation10.1016/j.ijmecsci.2011.09.009 ↗
40. In situ measurement of grain rotation during deformation of polycrystals10.1126/science.1057956 ↗
41. Experimental lower bounds on geometrically necessary dislocation density10.1016/j.ijplas.2010.03.009 ↗
42. A study of deformation twinning in a titanium alloy by X-ray diffraction contrast tomography10.1016/j.actamat.2015.12.032 ↗
43. Dislocation density distribution around an indent in single-crystalline nickel: comparing nonlocal crystal plasticity finite-element predictions with experiments10.1016/j.actamat.2014.03.012 ↗
44. Resolving geometrically necessary dislocation density onto individual dislocation types using EBSD-based continuum dislocation microscopy10.1016/j.ijplas.2015.08.005 ↗