journal article·2016-06

Development of non-flammable high strength AZ91 + Ca alloys via liquid forging and extrusion

Feng Li, Wee Yang Peh, Venkatakrishnan Nagarajan, Meng Kwong Ho, Atsushi Danno, Beng Wah Chua, Ming Jen Tan

Materials & Design· Volume 99
Publisher page

Abstract

Abstract Non-flammable high strength magnesium alloys were developed from AZ91 alloy mainly for the weight reduction in industrial applications. Calcium of 2, 4 and 6 wt.% was added and the ignition point was tested to study the flammability. Liquid forging and hot extrusion were applied to these alloys in order to enhance the mechanical properties. The microstructure, hardness and tensile properties were investigated to study the effects of calcium additions and different manufacturing processes. The results showed that calcium additions significantly improved the non-flammability, but mechanical properties of the gravity cast samples were degraded due to large amounts of Al2Ca at grain boundaries. After liquid forging and extrusion process, an increase of the mechanical properties was observed in the non-flammable magnesium alloys. The enhancement of properties was mainly contributed by the refined microstructure, redistribution of second phase and less porosity defects. Among all the tested alloys, AZ91 + 2% Ca prepared by liquid forging + extrusion demonstrated the optimal balance of high ignition point and excellent strength and ductility. 4% Ca addition further improves the ignition resistance and tensile strength of AZ91 alloy. The advantages of the manufacturing process combining liquid forging and hot extrusion were demonstrated to achieve improved mechanical properties for non-flammable magnesium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Review on research and development of magnesium alloys10.1016/S1006-7191(08)60054-X ↗
2. Light weight design with light metal castings10.1016/S0261-3069(97)00065-4 ↗
3. Controlling the ignition and flammability of magnesium for aerospace applications10.1016/j.corsci.2014.04.047 ↗
4. Creep behavior of AZ91 magnesium alloy10.1016/j.proeng.2013.03.228 ↗
5. Effects of Ca and Sr addition on mechanical properties of a cast AZ91 magnesium alloy at room and elevated temperature10.1016/j.msea.2005.05.028 ↗
6. Microstructural stability and high-temperature mechanical properties of AZ91 and AZ91+2RE magnesium alloys10.1016/j.matdes.2011.01.040 ↗
7. Effect of rare earth additions on microstructure and mechanical properties of AZ91 magnesium alloys10.1016/S1003-6326(10)60493-1 ↗
8. Mechanical characterization and corrosion behavior of newly designed Sn and Y added AZ91 alloy10.1016/j.matdes.2015.09.010 ↗
9. The effect of Ca and rare earth elements on the microstructure, mechanical properties and corrosion behavior of AZ91D10.1016/j.msea.2005.08.011 ↗
10. Effects of processing parameters and Ca content on microstructure and mechanical properties of squeeze casting AZ91–Ca alloys10.1016/j.msea.2013.12.014 ↗
11. Effects of Ca addition on the microstructure and mechanical properties of AZ91magnesium alloy10.1023/A:1017927109291 ↗
12. Microstructure and mechanical properties of rheo-squeeze casting AZ91–Ca magnesium alloy prepared by gas bubbling process10.1016/j.matdes.2014.10.087 ↗
13. Process optimisation for a squeeze cast magnesium alloy10.1016/j.jmatprotec.2003.07.006 ↗
14. Effect of squeeze casting parameters on the mechanical properties of AZ91–Ca Mg alloys10.1016/j.matdes.2009.11.039 ↗
15. Fabrication of extraordinary high-strength magnesium alloy by hot extrusion10.1016/j.scriptamat.2009.06.003 ↗
16. Mechanical properties of Mg–Al–Ca alloy processed by hot extrusion10.1016/j.msea.2006.12.130 ↗
17. Hot deformation behavior and processing maps of fine-grained SiCp/AZ91 composite10.1016/j.matdes.2014.11.006 ↗
18. Investigation of uniaxial low-cycle fatigue failure behavior of hot-rolled AZ91 magnesium alloy10.1016/j.ijfatigue.2012.10.010 ↗
19. Effects of the addition of Ca and Sb on the microstructure and mechanical properties of AZ91 magnesium10.1016/j.msea.2013.07.092 ↗
20. Microstructural evolution of AZ91 magnesium alloy during extrusion and heat treatment10.1016/S1003-6326(11)61279-X ↗
21. Effect of cooling condition on microstructure of semi-solid AZ91 slurry produced via ultrasonic vibration process10.1016/S1003-6326(11)61471-4 ↗
22. Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy10.1016/j.jallcom.2007.02.045 ↗
23. Effect of Ca and Y additions on oxidation behavior of magnesium alloys at high temperatures10.1016/S1002-0721(12)60079-9 ↗
24. Grain refinement of magnesium alloys: a review of recent research, theoretical developments, and their application10.1007/s11661-012-1513-x ↗
25. Microstructure and mechanical properties of a novel Mg–RE–Zn–Y alloy fabricated by rheo-squeeze casting10.1016/j.matdes.2016.01.063 ↗
26. Modeling the precipitation processes and strengthening mechanisms in a Mg–Al–(Zn) AZ91 alloy10.1007/s11661-005-0330-x ↗
27. Precipitation simulation of AZ91 alloy10.1007/s11837-014-0879-1 ↗
28. Effects of Ca combined with Sr additions on microstructure and mechanical properties of AZ91D magnesium alloy10.1179/174328405X43180 ↗
29. Optimizing the strength and ductility of AZ91 Mg alloy by ECAP and subsequent aging10.1016/j.msea.2013.09.052 ↗
30. Effects of hot extrusion and heat treatment on mechanical properties and microstructures of AZ91 magnesium alloy10.1016/j.egypro.2012.01.074 ↗
31. Extrusion and precipitation hardening behavior of AZ91 magnesium alloy10.1016/S1003-6326(13)62636-9 ↗
32. Microstructure and kinetics of hot deformation WE43 magnesium alloy10.1016/S1001-0521(08)60153-9 ↗