Evolutionary characteristics of microstructural hydration and chloride diffusion in UHPC
Source abstract
Abstract
This paper presents the evolutionary characteristics of microstructural hydration and chloride migration in ultra-high performance concrete (UHPC). The physicochemical interactions of constituents are simulated in conjunction with a random walk algorithm. When the hydration of cementitious pastes proceeds, accompanied by the evolution of hardening, the quantity of silicates becomes larger alongside irregularly dispersed byproducts (calcium silica hydrate, C-S-H, and calcium hydroxide, CH). Owing to the formation of pozzolanic C-S-H consuming CH, the silicate reactions of UHPC are less than the reactions of the ordinary concrete. The implications of tricalcium silicate (C3S) are notable for the early-age strength gain of UHPC in comparison with its dicalcium silicate (C2S) counterpart. The matured pozzolanic reactions and invariable packing density of UHPC are responsible for preserving the proportion of silica fume in the mixtures. Relative to UHPC, the ordinary concrete releases more heat caused by exothermic reactions that are a function of saturated pores and silica fume with the contribution of C3S. Regarding corrosion durability, the chloride contents of a bridge deck cast with the ordinary concrete exceed the content of a deck with UHPC. As part of technology transfer, the notion of performance-based design applies and practice guidelines are suggested.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. AASHTO · 2020
2. Role of load history in reliability-based decision analysis of aging bridges10.1061/(ASCE)0733-9445(1999)125:7(776) ↗
3. Fastener corrosion
4. Carbonation-induced and chloride-induced corrosion in reinforced concrete structures10.1061/(ASCE)MT.1943-5533.0001209 ↗
5. On the penetration of corrosion products from reinforcing steel into concrete due to chloride-induced corrosion10.1016/j.corsci.2010.03.025 ↗
6. Effect of high calcium fly ash, ladle furnace slag, and limestone filler on packing density, consistency, and strength of cement pastes10.3390/ma14020301 ↗
7. Reactive powder concretes with high ductility and 200–800 MPa compressive strength
8. Aci · 2018
9. Mix design and performance of lightweight ultra high-performance concrete10.1016/j.matdes.2022.110553 ↗
10. Electrically cured ultra-high performance concrete (UHPC) embedded with carbon nanotubes for field casting and crack sensing10.1016/j.matdes.2020.109127 ↗
11. Flexural strengthening of reinforced concrete beams or slabs using ultra-high performance concrete (UHPC): a state of the art review10.1016/j.engstruct.2019.110035 ↗
12. UHPC evolution, development, and utilization in construction: a review10.1016/j.jmrt.2020.12.051 ↗
13. Pierard, J., Dooms, B., and Cauberg, N. 2012. Evaluation of durability parameters of UHPC using accelerated lab tests, 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, 371-376.
14. Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)10.1016/j.cemconcomp.2015.11.005 ↗
15. Freeze-thaw resistance of Ultra-High performance concrete: Dependence on concrete composition10.1016/j.conbuildmat.2021.123523 ↗
16. Dynamic response of GFRP-reinforced UHPC beams under close-in blast loading10.1016/j.matdes.2022.111140 ↗
17. Bullard · 2014
18. M.Q. Chandler, W.B. Lawrimore, M.C. Edwards, R.D. Moser, J.D. Shannon, J.L. O’Daniel, Mesoscale modeling of cementitious materials: Phase I, Report No. ERDC/GSL TR-19-25, U.S. Army Corps of Engineers, Washington, D.C., 2019.10.21079/11681/32980 ↗
19. Mesoscale model and X-ray computed micro-tomographic imaging of damage progression in ultra-high-performance concrete10.1016/j.cemconres.2022.106799 ↗
20. Virtual estimation of the Griffith’s modulus and cohesive strength of ultra-high performance concrete10.1016/j.engfracmech.2019.106488 ↗
21. ACI · 2019
22. Seismic performance-based design of cable-supported bridges: state of practice in the United States10.1061/(ASCE)BE.1943-5592.0001639 ↗
23. Building information modelling for performance-based fire safety engineering analysis- a strategy for data sharing
24. A review on performance-based specifications toward concrete durability
25. Durability-based design: the European perspective
26. ACI. 2002. Standard practice for selecting proportions for normal, heavyweight, and mass concrete (ACI 211.1-91: reapproved 2002), American Concrete Institute, Farmington Hills, MI.
27. Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing10.1617/s11527-011-9767-0 ↗
28. Alkaysi · 2016
29. Predictive hydration model of portland cement and its main minerals based on dissolution theory and water diffusion theory10.3390/ma14030595 ↗
30. Effect of cement composition on fresh state and heat of hydration of Portland cement with limestone and slag
31. Experimental investigation and quantitative calculation of the degree of hydration and products in fly ash-cement mixtures
32. The ONIX model: a parameter-free multiscale framework for the prediction of self-desiccation in concrete10.1016/j.cemconcomp.2019.04.011 ↗
33. Influence of quartz powder and silica fume on the performance of Portland cement10.1038/s41598-020-78567-w ↗
34. Modelling of 3D microstructure and effective diffusivity of fly ash blended cement paste10.1016/j.cemconcomp.2020.103586 ↗
35. A study on conversion fraction and carbonation of Pozzolan blended concrete through Si MAS NMR analysis10.3390/app10196855 ↗
36. Permeability of cementitious materials using a multiscale pore network model10.1016/j.conbuildmat.2021.125298 ↗
37. T.C. Powers, Physical properties of cement paste, Proceedings of the fourth international conference on the chemistry of cement, Washington, DC, 43(2), US National Bureau of Standards Monograph, (1962) 577-613.
38. Mechanisms and kinetics of C4AF hydration with gypsum10.1016/0008-8846(81)90112-5 ↗
39. Taylor · 1990
40. Effect of sub-zero versus sub-freezing temperature on chloride diffusion and binding in concrete10.1016/j.conbuildmat.2021.123057 ↗
41. Effects of iron ore tailings on the compressive strength and permeability of ultra-high performance concrete10.1016/j.conbuildmat.2020.119917 ↗
42. Fractal characteristics of pore structure of hardened cement paste prepared by pressurized compact molding10.1016/j.conbuildmat.2020.119856 ↗
43. Nondestructive experimental characterization and numerical simulation on self-healing and chloride ion transport in cracked ultra-high performance concrete10.1016/j.conbuildmat.2018.11.054 ↗
44. Corrosion of steel rebar embedded in UHPC beams with cracked matrix10.1016/j.conbuildmat.2021.125589 ↗
45. A holistic model for cement paste and concrete chloride diffusion coefficient10.1016/j.cemconres.2020.106049 ↗
46. Deterioration models for prediction of remaining useful life of timber and concrete bridges: a review
47. Modelling capillary effects on the reactive transport of chloride ions in cementitious materials10.1016/j.cemconres.2020.106033 ↗
48. Bentz · 1995
49. Macal · 2020
50. Wilensky · 2015
51. Study of temporal change in chloride diffusion coefficient of concrete
52. Inorganic immobilisation of waste materials10.1016/S0166-1116(97)80262-2 ↗
53. Simulation of SF blended cement hydration10.1007/BF02479636 ↗
54. Estimation of the ionic diffusivity of virtual cement paste by random walk algorithm10.1016/j.conbuildmat.2011.08.077 ↗
55. Weast · 1976
56. A multi-phase model for predicting the effective diffusion coefficient of chlorides in concrete10.1016/j.conbuildmat.2011.06.024 ↗
57. Diffusion of chloride ions in hardened cement pastes10.1016/0008-8846(81)90111-3 ↗
58. Influence of SF and flyash on chloride diffusion and pH values in cement paste10.1016/0008-8846(87)90066-4 ↗
59. Rapid determination of the chloride diffusivity in concrete by applying an electrical field
60. Multi-scale prediction of the effective chloride diffusion coefficient of the concrete10.1016/j.conbuildmat.2011.03.041 ↗
61. Chloride diffusivity and mechanical performance of UHPC with hybrid fibers under heat treatment regime
62. M. Thomas, B. Green, E. O’Neal, V. Perry, S. Hayman, A. Hossack, Marine performance of UHPC at Treat Island. 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials, Kassel, Germany, (2012) 365-370.
63. Engineering hydration model for ordinary Portland cement based on heat flow calorimetry data10.1007/s10973-019-08165-0 ↗
64. Characterization of the hydration state of Portland cement pastes10.1016/0008-8846(88)90024-5 ↗
65. Effect of nano-CaCO3 on the mechanical properties and durability of concrete incorporating fly ash10.1155/2020/7365862 ↗
66. Steam-cured recycled aggregate concrete incorporating moderately high early strength cement: effect of binder content and curing conditions
67. Characterization of chromium doped tricalcium silicate using SEM/EDS, XRD and FTIR10.1016/0304-3894(95)00012-J ↗
68. An integrated approach for studying the hydration of portland cement systems containing silica fume10.1016/j.conbuildmat.2018.08.114 ↗
69. Simulation of cement paste microstructure hydration, pore space characterization and permeability determination10.1007/BF02482142 ↗
70. Fan, D., F., Yu, R., Shui, Z., Wu, C., Wang, J., and Su, Q. 2020. A novel approach for developing a green Ultra-High PerformanceConcrete (UHPC) with advanced particles packing meso-structure, Construction and Building Materials, 265, 120339.10.1016/j.conbuildmat.2020.120339 ↗
71. Hydration heat, strength and microstructure characteristics of UHPC containing blast furnace slag
72. Hydration heat kinetics of concrete with silica fume10.1016/j.conbuildmat.2009.06.008 ↗
73. Modeling hydration of cementitious systems
74. Analysis of hydration heat and autogenous shrinkage of high-strength mass concrete10.1680/macr.9.00106 ↗
75. Effects of hydration and temperature on the microstructure and transport properties of Nafion polyelectrolyte membrane: a molecular dynamics simulation10.3390/membranes11090695 ↗
76. A review of the mechanisms of set-retardation in Portland cement pastes containing organic admixtures10.1016/0008-8846(72)90057-9 ↗
77. Effect of temperature and humidity on the adhesion strength and damage mechanism of shotcrete-surrounded rock10.1016/j.conbuildmat.2016.08.126 ↗
78. Properties prediction of ultra high performance concrete using blended cement hydration model10.1016/j.conbuildmat.2014.04.084 ↗
79. New insights into long-term chloride transport in unsaturated cementitious materials: Role of degree of water saturation10.1016/j.conbuildmat.2019.117677 ↗
80. Torrent · 2022
81. Time-dependent reliability of deteriorating reinforced concrete bridge decks10.1016/S0167-4730(97)00021-0 ↗
82. P. Thoft-Christensen, F.M. Jensen, C.R. Middleton, A. Blackmore, Assessment of the reliability of concrete slab bridges, 7th IFIP WG 7.5 Working Conference, Boulder, CO, (1996) 1-8.
83. B. Elsener, U. Angst, Corrosion inhibitors for reinforced concrete, Science and Technology of Concrete Admixtures, (2016) 321-339.10.1016/B978-0-08-100693-1.00014-X ↗
84. Performance-based specifications for concrete exposed to chlorides
85. ASTM. 2019. Standard test method for electrical indication of concrete's ability to resist chloride ion penetration (ASTM C1202-19), ASTM International, West Conshohocken, PA.
86. Standards Australia. 2007. Specification and supply of concrete (AS1379-2007), Standards Australia, Sydney, Australia.
87. Repair optimization of highway bridges using system reliability approach10.1061/(ASCE)0733-9445(1999)125:7(766) ↗
88. Statistical variations in chloride diffusion in concrete bridges