Processability improvement of laser-assisted micro-machining 95W-3.5Ni-1.5Fe alloy based on surface and subsurface characteristics
Source abstract
Abstract
Laser-assisted micro-machining proves advantageous in improving the machinability of hard-brittle materials, but its effectiveness is easily weakened due to the uncertainty and complexity of microstructural transformation characteristics. In this research, a comprehensive investigation of the sustainable production mechanisms of tungsten heavy alloys was presented through recognizing the surface morphologies, subsurface microstructures, as well as micro-tool wear features, supported by the critical outcomes from single laser scanning (SLS) and laser-assisted micro-milling (LAMM) experimental tests. A laser thermal affected zone, which is composed mainly of surface oxide layer, near-surface softening layer, and subsurface metamorphic layer, was produced in laser heating. The relationship model between surface energy density and the thickness of laser thermal affected zone was determined. On this basis, a microstructure-based selection approach of the LAMM conditions, such as laser power and the depth of cut, was adopted to achieve a high-performance surface. Results indicated that a nanometer-level roughness surface, Sa = 57.03 nm, with no apparent residual thermal affected layer and newly generated subsurface damage layer were identified while suppressing flank wear. It is confirmed that the adaptability between the thickness of laser thermal affected layer and the depth of cut impacts LAMM sustainable production and justifies its application prospect.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Tensile behavior change depending on the varying tungsten content of W-Ni-Fe alloys10.1016/j.ijrmhm.2006.12.003 ↗
2. Microstructure and mechanical properties of fine-grained W-7Ni-3Fe heavy alloy by spark plasma sintering10.1016/j.msea.2012.04.099 ↗
3. Microstructural study of adiabatic shear bands formed by high-speed impact in a tungsten heavy alloy penetrator10.1016/S0921-5093(98)00565-6 ↗
4. Processing and microstructural characterization of liquid phase sintered tungsten-nickel-cobalt heavy alloys10.1016/j.ijrmhm.2014.12.009 ↗
5. Methods for improving ductility of tungsten - A review10.1016/j.ijrmhm.2018.04.012 ↗
6. Strain-rate dependence of the brittle-to-ductile transition temperature in tungsten10.1080/14786430701253197 ↗
7. Ductilisation of tungsten (W): On the shift of the brittle-to-ductile transition (BDT) to lower temperatures through cold rolling10.1016/j.ijrmhm.2015.09.001 ↗
8. Ductilisation of tungsten (W): Tungsten laminated composites10.1016/j.ijrmhm.2017.07.013 ↗
9. Sagar CK, Priyadarshini A, Gupa AK. Optimization of machining parameters during turning of tungsten heavy alloys using taguchi analysis. Proceedings of the ASME · 2019
10. Performance of cutting tools in machining Cu/W alloys for application in EDM electrodes10.1016/j.ijrmhm.2008.10.018 ↗
11. A comparative study on tool life and wear of uncoated and coated cutting tools in turning of tungsten heavy alloys
12. Wear behavior of natural diamond tool in cutting tungsten-based alloy10.1007/s00170-013-5045-3 ↗
13. Prediction and optimization of machining forces using oxley's predictive theory and RSM approach during machining of WHAs10.1016/j.dt.2019.07.004 ↗
14. On-line prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning10.1007/s10845-020-01669-9 ↗
15. Elliptical vibration cutting of tungsten alloy molds for optical glass parts10.1016/j.cirp.2007.05.032 ↗
16. Modification of tungsten heavy alloy by selective electrochemical etching in sodium carbonate electrolyte10.1149/2.0891914jes ↗
17. Brittle-ductile transitions in polycrystalline tungsten10.1080/14786435.2010.502145 ↗
18. Structural transition and ductility enhancement of a tungsten heavy alloy under high pressure10.1016/j.ijrmhm.2021.105632 ↗
19. Controlling factors for the brittle-to-ductile transition in tungsten single crystals10.1126/science.282.5392.1293 ↗
20. Dislocation dynamic modelling of the brittle–ductile transition in tungsten10.1080/14786430902992619 ↗
21. Dislocation-mediated strain hardening in tungsten: Thermo-mechanical plasticity theory and experimental validation10.1016/j.jmps.2015.08.015 ↗
22. The brittle-ductile transition of tungsten single crystals at the micro-scale10.1016/j.matdes.2018.04.009 ↗
23. Micro-milling of 65 vol% SiCp/Al composites with a novel laser-assisted hybrid process10.1016/j.ceramint.2020.07.107 ↗
24. Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining10.1007/s00170-016-9415-5 ↗
25. Study on the surface layer formation of aluminum matrix composites and associated machinability in precision milling based on laser melting modification10.1016/j.jmapro.2020.12.071 ↗
26. An investigation of cutting forces and cutting temperature during laser-assisted machining the Ti-6Cr-5Mo-5V-4Al beta titanium alloy10.1016/j.ijmachtools.2012.06.004 ↗
27. High-power diode laser assisted hard turning if AISI D2 tool steel10.1016/j.ijmachtools.2006.01.005 ↗
28. Investigation of surface integrity in laser-assisted machining of nickel based superalloy
29. Effect of tungsten content on microstructure and mechanical properties of swaged tungsten heavy alloys10.1016/j.msea.2013.06.041 ↗
30. Behavior of tungsten under irradiation and plasma interaction10.1016/j.jnucmat.2019.03.035 ↗
31. Semi-analytical source (SAS) method for 3-D transient heat conduction problems with moving heat source of arbitrary shape10.1016/j.ijheatmasstransfer.2020.120692 ↗
32. Numerical simulation of the melting and alloying processes of elemental titanium and boron powders using selective laser alloying10.1016/j.jmapro.2021.02.044 ↗
33. Influence of particle size on laser absorption and scanning track formation mechanisms of pure tungsten power during selective laser melting10.1016/j.eng.2019.07.003 ↗
34. Weil · 2013
35. Study of structure and residual stresses in cold rotary swaged tungsten heavy alloy10.1016/j.msea.2017.07.096 ↗
36. Brittle fracture and the brittle-to-ductile transition of tungsten10.1016/j.jnucmat.2003.08.009 ↗