The effect of oxidising thermal exposures on the fatigue properties of a polycrystalline powder metallurgy nickel-based superalloy
Source abstract
Abstract
A number of thermal exposures were undertaken to determine the effect oxidation has on the fatigue lives of the nickel-based superalloy RR1000. The thermal exposures initially caused a considerable reduction in the fatigue lives with increasing oxidation. However, the longest exposure time resulted in an S-N curve that lay between the shortest and mid length exposure. A range of analyses were undertaken to determine the presence of any mechanisms that could have caused this unexpected life increase; vacuum thermal exposures, small punch tensile, nanoindentation, microscopy and transmission Kikuchi diffraction. It was found that few of the mechanisms investigated were likely to have an effect on the change in life with the exceptions being; reduction in dislocation movement and crack deflection as a result of a recrystallised zone at the surface, variation in hardness of different regions due to a γ′ depleted plastic zone and a hard ceramic oxide, and reduced initiations due to the presence of a ‘healing’ chromium oxide scale. Notch fatigue tests were performed to determine the importance of the findings to components in service and it was found that the notch acted as the cause of crack initiation, effectively mitigating against the effects of the oxidation damage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Comparison of chromia growth kinetics in a Ni-based Superalloy, with and without shot-peening10.1016/j.corsci.2015.07.033 ↗
2. Effect of prior oxidation on high cycle fatigue performance of RR1000 and role of oxidation in fatigue crack initiation
3. The role of oxidation damage in fatigue crack initiation of an advanced Ni-based superalloy10.1016/j.ijfatigue.2015.08.016 ↗
4. Chromia layer growth on a Ni-based superalloy: sub-parabolic kinetics and the role of titanium10.1016/j.corsci.2013.05.016 ↗
5. Analysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR100010.1016/j.actamat.2013.01.031 ↗
6. Oxidation ahead of a crack tip in an advanced Ni-based superalloy10.1016/j.actamat.2012.12.017 ↗
7. Oxidation and the effects of high temperature exposures on notched fatigue life of an advanced powder metallurgy disk superalloy
8. Hunt · 2001
9. The Superalloys, fundamentals and applications
10. Manning · 2007
11. Effects of long term exposures on fatigue of PM disk superalloys
12. Effects of cyclic stress and temperature on oxidation damage of a nickel-based superalloy10.1016/j.msea.2011.04.029 ↗
13. The effect of minimum dwell cycles on the environmental and fatigue response of RR1000
14. Oxygen diffusion and crack growth for a nickel-based superalloy under fatigue-oxidation conditions10.1016/j.msea.2012.12.088 ↗
15. Environment and time dependent effects on the fatigue response of an advanced nickel based superalloy10.1016/j.ijfatigue.2009.02.039 ↗
16. Process development and microstructure and mechanical property evaluation of a dual microstructure heat treated advanced nickel disc alloy
17. CEN Workshop Agreement · 2007
18. Influence of tertiary gamma prime (γ′) size evolution on dwell fatigue crack growth behavior in CG RR100010.1007/s11661-018-4779-9 ↗
19. Gabb · 2016 · 44
20. Gabb · 2008 · 807
21. Effect of microstructure on time dependent fatigue crack growth behavior in a P/M turbine disk alloy
22. Effect of particle size on the creep rate of superalloy Inconel 71810.1016/0025-5416(87)90264-3 ↗
23. The effect of particle size and spacing on creep of two-phase copper–cobalt alloys10.1179/msc.1974.8.1.117 ↗
24. Fatigue crack closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
25. The significance of fatigue crack closure
26. Precise determination of fatigue crack closure in Al alloys10.1016/0921-5093(96)10403-2 ↗
27. High-throughput nanoindentation for statistical and spatial property determination10.1007/s11837-018-2752-0 ↗
28. Oxidation of a commercial nickel-based superalloy under static loading10.1007/s11837-014-1196-4 ↗
29. Effect of shot peening and post-peening heat treatments on the microstructure, the residual stresses and hardness, corrosion and deuterium uptake resistance of Zr-2.5Nb pressure tube material
30. Microstructure simulation on recrystallization of an as-cast nickel based single crystal superalloy10.1016/j.commatsci.2015.05.020 ↗
31. Surface recrystallization and its effect on oxidation of superalloy C26310.1016/j.corsci.2017.09.020 ↗
32. Suresh · 1998
33. Crack deflection: implications for the growth of long and short fatigue cracks10.1007/BF02663313 ↗
34. Experimental investigations and modelling of relaxation behaviour of shot peening residual stresses at high temperature for nickel base superalloys10.1179/mst.1997.13.4.360 ↗
35. Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue
36. Thermomechanical relaxation of residual stress in shot peened nickel base superalloy10.1179/mst.1994.10.11.947 ↗
37. Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue10.1016/j.ijfatigue.2005.07.027 ↗
38. Stability of shot peen residual stresses in IN100 subjected to creep and fatigue loading10.1016/j.proeng.2010.03.203 ↗
39. Relaxation of shot-peened residual stresses under creep loading10.1016/j.scriptamat.2008.03.021 ↗
40. Relaxation of shot-peened residual stresses under creep loading10.1115/1.3120393 ↗