journal article·2023-06Open access

Strategy of complex carbides in microalloyed 4Mn steels processed by quenching and austenite reversion

Shao-Lun Lu, Shan-Chun Yang, Kangying Zhu, Yi-Sheng Chen, Julie M. Cairney, Chun-Ming Lin, Hung-Wei Yen

Materials & Design· Volume 230

Abstract

This work describes a strategy to employ complex carbides for high-yield microalloyed 4Mn steels processed by quenching and reversion (Q&R). The nano/microstructural details are investigated by using electron microscopy and atom probe. It is found that complex carbides are classified into two types and contribute to yield strength in different ways. First, coarse carbides (MC1), which are retained after austenization and quenching, provide the Zener pinning effect and contribute to strengthening by microstructure refinement and precipitation hardening. Second, nanoscale carbides (MC2), which precipitate in martensite during austenite reversion, provide precipitation hardening. Furthermore, the precipitation of MC1 accelerates austenite reversion due to the finer martensite microstructure. Hence, the strengthening effects and TRIP effect can be tuned by controlling the proportion of the two types of carbide. This concept is validated in Ti-Mo 4Mn steel, which exhibits a high yield strength of about 850 MPa, a high ultimate tensile strength of about 950 MPa, and excellent elongation of over 20%. The complex carbide strategy is able to increase yield strength without sacrificing much ductility for Q&R medium-Mn steels.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Ultrafine-grained microstructures and mechanical properties of alloy steels10.1007/BF02647665 ↗
2. Recent developments in advanced high strength sheet steels for automotive applications: an overview
3. Development of 3rd generation AHSS with medium Mn content alloying compositions10.1016/j.msea.2012.11.113 ↗
4. Austenite stability effects on tensile behavior of manganese-enriched-austenite transformation-induced plasticity steel10.1007/s11661-011-0687-y ↗
5. On the selection of the optimal intercritical annealing temperature for medium Mn TRIP steel10.1007/s11661-013-1860-2 ↗
6. The relative contributions of TWIP and TRIP to strength in fine grained medium-Mn steels10.1016/j.msea.2022.143864 ↗
7. Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel10.1016/j.actamat.2011.03.025 ↗
8. The relationships between tensile properties and hole expansion property of C-Mn steels10.1023/A:1025913123832 ↗
9. Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials
10. Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels10.1016/j.actamat.2014.09.017 ↗
11. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
12. Making ultrastrong steel tough by grain-boundary delamination10.1126/science.aba9413 ↗
13. Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels10.1126/sciadv.aay1430 ↗
14. Development of high strength hot-rolled sheet steel consisting of ferrite and nanometer-sized carbides10.2355/isijinternational.44.1945 ↗
15. Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel10.1016/j.actamat.2011.06.037 ↗
16. Application of advanced experimental techniques to elucidate the strengthening mechanisms operating in microalloyed ferritic steels with interphase precipitation10.1016/j.actamat.2020.10.014 ↗
17. Effects of interphase TiC precipitates on tensile properties and dislocation structures in a dual phase steel10.1016/j.matchar.2016.11.023 ↗
18. A novel technique for developing a dual-phase steel with a lower strength difference between ferrite and martensite
19. Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions10.1016/j.scriptamat.2008.02.002 ↗
20. Microstructure and mechanical behaviors of GPa-grade TRIP steels enabled by hot-rolling processes10.1016/j.msea.2019.06.015 ↗
21. Microstructure–properties relationship in a one-step quenched and partitioned steel10.1016/j.msea.2013.09.063 ↗
22. The relationships of microstructure-mechanical properties in quenching and partitioning (Q&P) steel accompanied with microalloyed carbide precipitation10.1016/j.msea.2018.03.061 ↗
23. Effect of Quenching Temperature on the Strengthening Mechanism of Low-Carbon Microalloyed Quenching and Partitioning Steel10.1002/srin.202200601 ↗
24. Interactions between deformation-induced defects and carbides in a vanadium-containing TWIP steel10.1016/j.scriptamat.2012.02.002 ↗
25. Microstructure and Mechanical Properties of a Hot-rolled High Manganese TWIP Steel Containing 0.3% V10.2355/isijinternational.ISIJINT-2019-578 ↗
26. TiC precipitation induced effect on microstructure and mechanical properties in low carbon medium manganese steel10.1016/j.msea.2011.10.037 ↗
27. Carbide precipitation behavior and mechanical properties of micro-alloyed medium Mn steel10.1016/j.jmst.2019.12.024 ↗
28. Microstructural evolution and mechanical properties of V-containing medium-Mn steel manufactured via cold rolling and intercritical annealing10.1016/j.jmrt.2021.07.045 ↗
29. Strengthening mechanism and carbide precipitation behavior of Nb-Mo microalloy medium Mn steel10.3390/ma14237461 ↗
30. Improved strength of a medium-Mn steel by V addition without sacrificing ductility10.1016/j.msea.2020.140681 ↗
31. Effect of Nb microalloying on microstructure evolution and mechanical properties in low carbon medium manganese steel10.1016/j.msea.2021.141813 ↗
32. Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling10.1016/j.msea.2022.143904 ↗
33. Microstructures and mechanical properties of three medium-Mn steels processed via quenching and partitioning as well as austenite reversion heat treatments10.1016/j.msea.2022.143341 ↗
34. Ductile 2-GPa steels with hierarchical substructure10.1126/science.add7857 ↗
35. The excellent strength and ductility matching of directly warm-rolled V-alloyed medium manganese steel by stacking fault networks10.1016/j.matdes.2023.111719 ↗
36. The effect of dislocation contrast on x-ray line broadening: a new approach to line profile analysis10.1063/1.117951 ↗
37. Gault · 2012
38. Advances in the calibration of atom probe tomographic reconstruction10.1063/1.3068197 ↗
39. ASTM Standard E8/E8M-2013, Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2013.
40. New protocol for orientation reconstruction from martensite to austenite in steels10.1016/j.mtla.2019.100554 ↗
41. Grains, Phases and Interfaces: An Interpretation of Microstructure
42. Austenite stabilization through manganese enrichment10.1016/j.scriptamat.2010.09.040 ↗
43. EBSD image quality mapping10.1017/S1431927606060090 ↗
44. Orientation relationship transition of nanometre sized interphase precipitated TiC carbides in Ti bearing steel10.1179/026708309X12512744154207 ↗
45. Variant selection of reversed austenite in lath martensite10.2355/isijinternational.47.1527 ↗
46. High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in tempered steel10.1080/14786430310001638762 ↗
47. Early stages of yielding and strain aging of a vanadium-containing dual-phase steel10.1007/BF02812021 ↗
48. Physical chemistry of the groups IVa (Ti, Zr), Va (V, Nb, Ta) and the rare earth elements in steel10.2355/isijinternational1966.15.145 ↗
49. Equilibrium solubility products of molybdenum carbide and tungsten carbide in iron10.1016/j.scriptamat.2011.10.047 ↗
50. Stability of (Ti, M) C (M= Nb, V, Mo and W) carbide in steels using first-principles calculations10.1016/j.actamat.2011.09.051 ↗
51. Effect of molybdenum addition on the precipitation of carbides in the austenite matrix of titanium micro-alloyed steels10.1007/s10853-016-9804-z ↗
52. Dislocation movement through random arrays of obstacles10.1139/p67-044 ↗
53. Pickering · 1978
54. Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+ TRIP steel10.1016/j.actamat.2016.02.001 ↗
55. Understanding the detection of carbon in austenitic high-Mn steel using atom probe tomography10.1016/j.ultramic.2013.01.010 ↗
56. Atom probe tomography data analysis procedure for precipitate and cluster identification in a Ti-Mo steel10.1016/j.dib.2018.03.094 ↗
57. Takaki · 2010 · 11
58. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
59. Digital Reconstruction of Engineered Austenite: Revisiting Effects of Grain Size and Ausforming on Variant Selection of Martensite10.3390/met12091511 ↗
60. The physical metallurgy of microalloyed steels
61. Modelling strength and ductility of ultrafine grained BCC and FCC alloys using irreversible thermodynamics10.1179/174328408X353750 ↗
62. Precipitation hardening in metals10.1179/026708399773002782 ↗
63. Effect of Nb micro-alloying on austenite nucleation and growth in a medium manganese steel during intercritical annealing10.1016/j.actamat.2022.117786 ↗
64. Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2 C–5Mn)10.1016/j.msea.2011.11.009 ↗
65. Austenite stability and its effect on the toughness of a high strength ultra-low carbon medium manganese steel plate10.1016/j.msea.2016.07.104 ↗
66. Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions10.1016/j.msea.2018.04.115 ↗
67. Effect of hot rolling temperature on the microstructure and mechanical properties of ultra-low carbon medium manganese steel10.1016/j.msea.2018.06.020 ↗
68. Effect of carbon and manganese on the quenching and partitioning response of CMnSi steels10.2355/isijinternational.51.137 ↗
69. Driving force and logic of development of advanced high strength steels for automotive applications10.1002/srin.201200288 ↗
70. Development of high strength and ductile ultra fine grained dual phase steel with nano sized carbide precipitates in a V-Nb microalloyed steel10.1016/j.msea.2012.12.084 ↗
71. Development of a new ultrafine grained dual phase steel and examination of the effect of grain size on tensile deformation behavior10.1016/j.msea.2014.01.053 ↗
72. Continuous cooling transformation diagrams and properties of micro-alloyed TRIP steels10.1016/j.msea.2006.01.128 ↗
73. Relationship between microstructure and mechanical properties in Nb–V microalloyed TRIP steel10.1179/1743284714Y.0000000637 ↗
74. Characterization and modeling of manganese effect on strength and strain hardening of martensitic carbon steels10.2355/isijinternational.53.1076 ↗
75. Strengthening behavior of Fe–Cr–Ni–Al–(ti) maraging steels10.1016/j.msea.2011.03.058 ↗
76. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗