Densifying hydration products of alite by a bio-inspired admixture
Source abstract
Abstract
A bio-inspired, plant-derived polyphenol, tannic acid (TA) was identified as a renewable admixture to improve the compressive strength of concretes. Aiming to understand the underlying mechanism responsible for this strength improvement, this study examines how TA mediates the hydration of tricalcium silicate (alite). Experimental study shows that TA can form complex with calcium ions through chelating, retarding the hydration of the alite and changing of the hydration products. Particularly, X-ray diffraction analysis shows that TA makes calcium hydroxide preferentially grow on the [0 0 1] face. Fourier-transform infrared spectroscopy and 29Si MAS NMR results reveal that the mean chain length of calcium silicate hydrate (CSH) is reduced by TA. More importantly, mercury intrusion porosimetry testing reveals that pores with size near 30 nm was almost eliminated by adding TA, leading to higher elastic modulus of the produced CSH and higher compressive strength of the produced concrete.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Cements in the 21st century: challenges, perspectives, and opportunities10.1111/jace.14948 ↗
2. Environmental impacts and decarbonization strategies in the cement and concrete industries10.1038/s43017-020-0093-3 ↗
3. G. Hammond, C. Jones, Inventory of carbon & energy (ICE) version 3.0, University of Bath, 2019
4. The nanogranular nature of C-S–H10.1016/j.jmps.2006.06.003 ↗
5. Engineering the bonding scheme in C-S–H: The iono-covalent framework10.1016/j.cemconres.2007.09.026 ↗
6. Nanogranular packing of C-S–H at substochiometric conditions10.1016/j.cemconres.2009.09.017 ↗
7. M. Vandamme, F.-J. Ulm, Nanogranular origin of concrete creep, Proceedings of the National Academy of Sciences 106(26) (2009) 10552-10557.10.1073/pnas.0901033106 ↗
8. Physical origins of thermal properties of cement paste
9. The contribution of propagons and diffusons in heat transport through calcium-silicate-hydrates10.1063/1.4975159 ↗
10. Evidence on the dual nature of aluminum in the calcium-silicate-hydrates based on atomistic simulations10.1111/j.1551-2916.2011.05058.x ↗
11. Reactive molecular simulation on the calcium silicate hydrates/polyethylene glycol composites10.1016/j.cplett.2017.09.020 ↗
12. Interaction mechanisms between organic and inorganic phases in calcium silicate hydrates/poly (vinyl alcohol) composites10.1016/j.cemconres.2019.105891 ↗
13. Modification of poly (ethylene glycol) on the microstructure and mechanical properties of calcium silicate hydrates10.1016/j.cemconres.2018.10.001 ↗
14. Interfacial connection mechanisms in calcium–silicate–hydrates/polymer nanocomposites: a molecular dynamics study10.1021/acsami.7b12795 ↗
15. Molecular dynamics modeling of the interface between surface functionalized graphitic structures and calcium–silicate–hydrate: interaction energies, structure, and dynamics10.1016/j.jcis.2008.04.023 ↗
16. Structure and morphology of calcium-silicate-hydrates cross-linked with dipodal organosilanes10.1016/j.cemconres.2020.106076 ↗
17. Nature's underwater adhesive specialist10.1016/0143-7496(87)90048-0 ↗
18. Polyphenolic substance of Mytilus edulis: novel adhesive containing L-dopa and hydroxyproline10.1126/science.212.4498.1038 ↗
19. Recent progress in synthesis and application of mussel-inspired adhesives10.1039/C9NR09780E ↗
20. Catechols as versatile platforms in polymer chemistry10.1016/j.progpolymsci.2012.06.004 ↗
21. N. Zohhadi, Bio-Inspired and Low-Content Polymer Cement Mortar for Structural Rehabilitation, University of South Carolina - Columbia, Retrieved from https://scholarcommons.sc.edu/etd/2687, 2014
22. Bio-inspired functionalization of very fine aggregates for better performance of cementitious materials10.1016/j.conbuildmat.2020.118104 ↗
23. Effect of Concrete Composition on the Thermodynamic Binding of Dopamine: A DFT Study
24. Universal polymer coatings and their representative biomedical applications10.1039/C5MH00089K ↗
25. Cross-linking of dermal sheep collagen with tannic acid10.1016/S0142-9612(96)00202-5 ↗
26. pH responsive decomposable layer-by-layer nanofilms and capsules on the basis of tannic acid10.1021/ma047629x ↗
27. Hydrogen-bonded multilayers of a neutral polymer and a polyphenol10.1021/ma800186q ↗
28. High molecular weight plant polyphenolics (tannins) as biological antioxidants10.1021/jf970975b ↗
29. Enhanced drug encapsulation and extended release profiles of calcium–alginate nanoparticles by using tannic acid as a bridging cross-linking agent10.3109/02652048.2014.985343 ↗
30. Experimental investigation and molecular dynamic simulation of Tannic acid as an eco-friendly inhibitor for calcium carbonate scale
31. Investigation of tannic acid cross-linked onto magnetite nanoparticles for applying in drug delivery systems10.1016/j.jddst.2017.03.011 ↗
32. Ageing of clay and clay–tannin geomaterials for building10.1016/j.conbuildmat.2014.03.005 ↗
33. Strength and creep behavior of geomaterials for building with tannin addition10.1617/s11527-013-0104-7 ↗
34. Mechanisms for efficient clay dispersing effect with tannins and sodium hydroxide10.1016/j.colsurfa.2021.127589 ↗
35. Low-cost, ubiquitous biomolecule as a strength enhancer for cement mortars10.1016/j.conbuildmat.2021.125305 ↗
36. Fang · 2021 · 212
37. A renewable admixture to enhance the performance of cement mortars through a pre-hydration method10.1016/j.jclepro.2021.130095 ↗
38. Performance enhancement of silica fume blended mortars using bio-functionalized nano-silica10.1016/j.conbuildmat.2021.125467 ↗
39. Balluffi · 2005
40. The kinetics of grain boundary nucleated reactions10.1016/0001-6160(56)90041-4 ↗
41. A new approach to modeling the nucleation and growth kinetics of tricalcium silicate hydration10.1111/j.1551-2916.2007.01858.x ↗
42. Nucleation and growth models for hydration of cement10.1016/j.cemconres.2012.03.019 ↗
43. Taylor · 1997
44. Handbook · 2007
45. Multiscale understanding of tricalcium silicate hydration reactions10.1038/s41598-018-26943-y ↗
46. Scrivener · 2016
47. Tannic acid adsorption and its role for stabilizing carbon nanotube suspensions10.1021/es800329c ↗
48. Chloride-binding capacity of hydrotalcite in cement pastes containing dolomite and metakaolin10.1016/j.cemconres.2018.02.002 ↗
49. Effect of Biomolecules on the Nanostructure and Nanomechanical Property of Calcium-Silicate-Hydrate10.1038/s41598-018-27746-x ↗
50. Models for the composition and structure of calcium silicate hydrate (C-S-H) gel in hardened tricalcium silicate pastes10.1016/0008-8846(92)90030-Y ↗
51. Effect of calcium–silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature10.1617/s11527-013-0062-0 ↗
52. Effect of alkali hydroxide on calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2021.106636 ↗
53. Mercury intrusion porosimetry in concrete technology: tips in measurement, pore structure parameter acquisition and application10.1007/s10934-013-9765-4 ↗
54. Mondal · 2008
55. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
56. A realistic molecular model of cement hydrates10.1073/pnas.0902180106 ↗
57. A model for two types of calcium silicate hydrate in the microstructure of Portland cement pastes10.1016/S0008-8846(00)00257-X ↗
58. Hydration of Portland cement accelerated by CSH seeds at different temperatures10.1016/j.cemconres.2020.105978 ↗
59. Effect of organic grinding aids on cement properties and the analysis via organic cement chemistry
60. Hydration of Portland cement
61. Barnes · 2002
62. Rapid hemostasis accompanied by antibacterial action of calcium crosslinking tannic acid-coated mesoporous silica/silver Janus nanoparticles10.1016/j.msec.2021.111958 ↗
63. Interaction mechanism of tannic acid with pyrite surfaces and its response to flotation separation of chalcopyrite from pyrite in a low-alkaline medium10.1016/j.jmrt.2020.02.067 ↗
64. Green synthesis of spherical calcium hydroxide nanoparticles in the presence of tannic acid10.1155/2020/9501897 ↗
65. Study on the role of tannic acid–calcium oxide adduct as a green heat stabilizer as well as reinforcing filler in the bio-based hybrid polyvinyl chloride–thermoplastic starch polymer composite10.1002/pen.25761 ↗
66. Sherwood · 2018
67. Molecular dynamics simulation of calcium silicate hydrate/tannic acid interfacial interactions at different temperatures: configuration, structure and dynamic10.1016/j.conbuildmat.2022.126820 ↗
68. Aggregate-cement paste interface: Part I. Influence of aggregate geochemistry10.1016/S0008-8846(99)00086-1 ↗
69. Study of formation of calcium monohydrocarboaluminate by reaction of hydrated calcium with calcite aggregate in portland-cement paste10.1016/0008-8846(80)90004-6 ↗
70. Structure of calcium silicate hydrate (C-S-H): Near-, Mid-, and Far-infrared spectroscopy10.1111/j.1151-2916.1999.tb01826.x ↗
71. Effects of Ca/Si ratio, aluminum and magnesium on the carbonation behavior of calcium silicate hydrate10.3390/ma12081268 ↗
72. Bridging the gap between NMR measured mean silicate chain length and nano-scale silicate polymorphism of calcium silicate hydrates10.1016/j.cemconres.2020.106268 ↗
73. Structure and intrinsic mechanical properties of nanocrystalline calcium silicate hydrate10.1021/acssuschemeng.0c03230 ↗