journal article·2026-08Open access

4D printing of transformable re-entrant auxetic metastructures using shape memory polymers for wearable protective devices

Minsung Kim, Eui-Hyun Kim, Seung Jae Lee, Keun Park

Materials & Design· Volume 268

Abstract

4D printing on shape memory polymers (SMPs) enables transformable structures capable of programmable and reversible shape morphing, offering significant potential for adaptive wearable protection. In this study, transformable re-entrant auxetic metastructures based on SMP were designed and fabricated via 4D printing to simultaneously achieve high stretchability and reliable shape recoverability. Finite element analyses incorporating a thermo-viscoelastic constitutive model were conducted to accurately capture temperature-dependent deformation during thermal programming. Both numerical and experimental results demonstrate that the re-entrant auxetic structure exhibits superior stretchability and recovery performance, owing to its bending-dominated deformation mechanism, which enables large ligament rotation while mitigating stress concentration. Compared with conventional porous structures, the re-entrant design achieved substantially larger recoverable deformation and improved structural integrity during repeated transformations. A transformable wrist splint was developed as a representative application, which can be programmed from a compact 2D configuration (50 × 60 mm) into a personalized 3D shape and subsequently recovered within 10 s at 60°C, maintaining a recovery ratio exceeding 97% over repeated cycles. These results demonstrate that combining SMPs with 4D-printed re-entrant auxetic metastructures provides an effective strategy for developing lightweight, portable, and reusable wearable protective devices with enhanced transformability and mechanical robustness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Materials and Mechanics · Polymer composites and self-healing · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A survey of wearable devices and challenges10.1109/COMST.2017.2731979 ↗
2. Multifunctional protective materials for personal safety: performance evaluation and emerging applications10.1021/acsaenm.5c00751 ↗
3. Dolez · 2016 · 497
4. Personalized 3D-printed forearm braces as an alternative for a traditional plaster cast or splint
5. Personalized assistive device manufactured by 3D modelling and printing techniques10.1080/17483107.2018.1494217 ↗
6. Design for additive manufacturing of customized cast with porous shell structures10.1007/s12206-017-1042-z ↗
7. Is protective equipment useful in preventing concussion? a systematic review of the literature10.1136/bjsm.2009.058271 ↗
8. Measuring the risk of sustaining injury in sport a novel approach to aid the re-design of personal protective equipment10.1016/j.apergo.2011.12.010 ↗
9. A review of 4D printing10.1016/j.matdes.2017.02.068 ↗
10. Advances in 4D printing: materials and applications10.1002/adfm.201805290 ↗
11. Shape-memory polymers10.1016/S1369-7021(07)70047-0 ↗
12. A review of stimuli-responsive shape memory polymer composites10.1016/j.polymer.2013.02.023 ↗
13. 4D printing of magnetically responsive shape memory polymers: Toward sustainable solutions in soft robotics, wearables, and biomedical devices10.1002/advs.202513091 ↗
14. Introduction to shape-memory polymers for biomedical applications10.1016/B978-0-85709-698-2.00001-5 ↗
15. Shape memory materials10.1016/S1369-7021(10)70128-0 ↗
16. 4D printing of shape memory polymers: from macro to micro10.1002/adfm.202110580 ↗
17. Ultraflexible sensor development via 4D printing: Enhanced sensitivity to strain, temperature, and magnetic fields
18. Redeployable, 4D printed wave spring actuators10.1016/j.matdes.2023.112163 ↗
19. Triple shape memory polymers by 4D printing10.1088/1361-665X/aabc2a ↗
20. Untethered soft robotic matter with passive control of shape morphing and propulsion10.1126/scirobotics.aax7044 ↗
21. Stimuli-responsive smart materials for biomedical applications10.1016/j.mser.2025.101126 ↗
22. 4D printing for minimally invasive biomedical applications: programmable smart materials for deployable devices, drug delivery, and tissue regeneration10.1016/j.matdes.2026.115555 ↗
23. 4D printing of shape memory-based personalized endoluminal medical devices10.1002/marc.201600628 ↗
24. 4D-printed sandwich-structured metamaterial intestinal stents for palliative tumor therapy10.1002/adma.202518990 ↗
25. Development of a shape-memory tube to prevent vascular stenosis10.1002/adma.201904476 ↗
26. 4D printing of hydrogels: Innovation in material design and emerging smart systems for drug delivery10.3390/ph15101282 ↗
27. 4D-printed intelligent reconfigurable occluder with anti-thrombotic and rapid-repairing capabilities for patent foramen ovale
28. 4D printing of composite thermoplastic elastomers for super-stretchable soft artificial muscles10.1002/app.57177 ↗
29. 4D-printed soft exoskeleton for grasping assistance10.1016/j.matdes.2025.115111 ↗
30. 4D printing for biomedical applications10.1002/adma.202402301 ↗
31. Highly programmable 4D printed multi-shape gradient metamaterials and multifunctional devices10.1088/2631-7990/add8ca ↗
32. On the internal architecture of lightweight negative Poisson’s ratio (auxetic) metastructures: a review
33. 3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities10.1016/j.matdes.2024.113119 ↗
34. Shape morphing of re‐entrant honeycomb metamaterials for linear auxetic behaviors10.1002/adem.202570001 ↗
35. Experimental investigation and modeling of the temperature memory effect in a 4D-printed auxetic structure10.1088/1361-665X/ac8031 ↗
36. 4D printing auxetic metamaterials with tunable, programmable, and reconfigurable mechanical properties10.1002/adfm.202004226 ↗
37. 4D printed auxetic structures with tunable mechanical properties
38. Compression behavior of 4D printed metamaterials with various Poisson’s ratios10.1016/j.ijmecsci.2023.108819 ↗
39. Study on the shape memory performance of 4D-printed auxetic cellular structures with energy absorption application10.1002/mame.202500320 ↗
40. Convena Polymers, SMP 55 series filaments technical data sheet, https://filament2print.com/en/index.php?controller=attachment&id_attachment=1125 (accessed 12 June 2026).
41. From material to solution: Implementing shape memory behavior of thermoplastic polymers in commercial FEA software for structural analysis10.3390/jmmp9030073 ↗
42. Prediction of temperature-dependent free recovery behaviors of amorphous shape memory polymers10.1039/c2sm26249e ↗
43. Deformation behavior of re-entrant auxetic metamaterials considering shape transformation effects10.1007/s12206-023-2407-0 ↗
44. A review of the evidence for threshold of burn injury10.1016/j.burns.2017.04.003 ↗
45. The design and manufacturing of a Patient-specific wrist splint for rehabilitation of rheumatoid arthritis10.1016/j.matdes.2024.112704 ↗
46. An Integrative computational design workflow and validation methodology for 3D-printed personalized orthopedic devices: Case study of a wrist–hand orthosis (WHO)10.3390/pr11072204 ↗
47. Analysis and comparison of wrist splint designs using the finite element method: Multi-material three-dimensional printing compared to typical existing practice with thermoplastics10.1177/0954411917718221 ↗
48. Exploring orthosis designs for 3D printing applying the finite element approach: Study of different materials and loading conditions10.57197/JDR-2023-0011 ↗