Design, fabrication and characterization of TiO 2 -SiO 2 multilayer with tailored color glazing for thermal solar collectors
Source abstract
Abstract
Abstract The paper reports on the design, fabrication, and characterization of a 7-layer SiO2-TiO2 colored coating for solar thermal facades. A combined theoretical and experimental approach was employed for designing the colored coating by using optical modeling and individual layers characterization, targeting for high solar transmittance and pronounced yellow-green reflected color. SiO2-TiO2 multilayers were deposited on glass and silicon substrates by using the reactive RF magnetron sputtering of stoichiometric oxide targets. The coatings were investigated by UV–Vis spectrophotometric methods for optical properties, surface profilometry, X ray reflectivity and SEM for the thickness of individual layers composing the multilayer and AFM for surface roughness. Hardness H, reduced modulus Er, and adhesion were determined by nanoindentation and scratch tests. The deposited colored glazing exhibited a prominent reflectivity peak of ~ 54% centered at 574 nm, specific visible reflectance of ~ 45.39% and an integrated solar transmittance of about 80.3%. Its optical properties were preserved in the ambient for temperatures up to 200 °C and the color was not modified for incidence angles up to 45°. H values of 7.18 GPa, Er of 88.31 GPa, H/Er ratio of about 0.081 and good scratch resistance up to 13 mN were measured.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Solar Thermal and Photovoltaic Systems · Optical Coatings and Gratings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Towards an improved architectural quality of building integrated solar thermal systems (BIST)10.1016/j.solener.2007.02.009 ↗
2. Potential of quarterwave interference stacks for colored thermal solar collectors10.1016/j.solener.2004.12.008 ↗
3. Review and analysis of solar thermal facades10.1016/j.solener.2016.06.006 ↗
4. Use of finite element models for estimating thermal performance of facade-integrated solar thermal collectors10.1016/j.apenergy.2016.03.039 ↗
5. Chromaticity and optical properties of colored and black solar-thermal absorbing coatings10.1016/j.solmat.2010.05.019 ↗
6. Towards coloured glazed thermal solar collectors10.1016/j.solmat.2004.02.042 ↗
7. Kinoshita · 2008
8. Knittl · 1976
9. Multilayered Al2O3/SiO2 and TiO2/SiO2 coatings for glazed colored solar thermal collectors10.1016/j.solmat.2005.01.015 ↗
10. Low temperature processing of multilayer dielectrics mirrors by sol-gel method10.1016/j.matlet.2015.09.020 ↗
11. Color tunable low cost transparent heat reflector using copper and titanium oxide for energy saving application10.1038/srep20182 ↗
12. Energy-saving spectrally-selective coatings based on MoO3/Ag thin films10.1016/j.matdes.2015.02.025 ↗
13. Designs and investigations of anti-glare blue-tint side-view car mirrors10.1016/j.matdes.2010.02.033 ↗
14. Optical filters from SiO(2) and TiO(2) multi-layers using sol-gel spin coating method10.1016/j.solmat.2004.07.022 ↗
15. Design and fabrication of UV band-pass filters based on SiO2/Si3N4 dielectric distributed bragg reflectors10.1016/j.apsusc.2015.12.222 ↗
16. Proposal for a multi-material design procedure10.1016/j.matdes.2013.11.004 ↗
17. Materials selection for cleaner production: An environmental evaluation approach10.1016/j.matdes.2012.01.014 ↗
18. Large area glass coating10.1016/S0257-8972(98)00737-3 ↗
19. Deposition and characterization of titania-silica optical multilayers by asymmetric bipolar pulsed dc sputtering of oxide targets10.1088/0022-3727/43/4/045302 ↗
20. Influence of substrate and annealing temperatures on optical properties of RF-sputtered TiO2 thin films10.1016/j.optmat.2009.07.011 ↗
21. Microstructure modification of amorphous titanium oxide thin films during annealing treatment10.1016/S0040-6090(96)09510-7 ↗
22. Calculation of optical and electronic properties of modeled titanium dioxide films of different densities10.1364/AO.53.00A159 ↗
23. Reactively sputtered coatings on architectural glazing for coloured active solar thermal facades10.1016/j.enbuild.2012.12.030 ↗
24. Optical properties of SiO2/TiO2 thin layers prepared by sol-gel method
25. Optical properties of TiO2 based multilayer thin films: application to optical filters
26. Demonstration of optical interference filters utilizing tunable refractive index layers10.1364/OE.18.00A594 ↗
27. Development of large area sputtered solar absorber coatings10.1016/S0022-3093(97)00283-4 ↗
28. TiO2/SiO2 multilayer as an antireflective and protective coating deposited by microwave assisted magnetron sputtering10.2478/s11772-013-0085-7 ↗
29. Functional photocatalytically active and scratch resistant antireflective coating based on TiO2 and SiO210.1016/j.apsusc.2016.01.226 ↗
30. Determination of mechanical properties of silicon nitride thin films using nanoindentation
31. Nanoindentation study of magnetron-sputtered CrN and CrSiN coatings10.1016/j.matdes.2011.01.031 ↗
32. Measurement for mechanical behavior and fatigue property of Cu films by nanoscale dynamic load method10.1016/j.matdes.2014.08.043 ↗
33. Tikhonravov
34. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. General approach to reliable characterization of thin metal films10.1364/AO.50.001453 ↗
36. Zur Erklärung der abnormen Farbfolge im Spektrum einiger Substanzen10.1002/andp.18712190612 ↗
37. Effective medium models for the optical properties of inhomogeneous materials10.1364/AO.20.000026 ↗
38. Macleod · 2014 · 117
39. Elaboration and characterization of titania coatings10.1016/S0040-6090(96)09106-7 ↗
40. Interspecimen Comparison of the Refractive Index of Fused Silica10.1364/JOSA.55.001205 ↗
41. Exploitation of multiple incidences spectrometric measurements for thin film reverse engineering10.1364/OE.20.015734 ↗
42. Optical characterization and reverse engineering based on multiangle spectroscopy10.1364/AO.51.000245 ↗
43. Optical reflectance and transmittance of a multilayer coating affected by refractive-index inhomogeneity, interface roughness, and thickness wedge10.1016/j.jnoncrysol.2008.11.040 ↗
44. On the reliability of reverse engineering results10.1364/AO.51.005543 ↗
45. Characterisation of antireflective TiO2//SiO2 coatings by complementary techniques10.1016/S0040-6090(99)00212-6 ↗
46. Thin film multilayer design types for colored glazed thermal solar collectors10.1016/j.solmat.2004.11.015 ↗
47. Tunable optical properties of SiNx thin films by OES monitoring in a reactive RF magnetron plasma10.1002/ppap.201400202 ↗
48. Structural characterization of radiofrequency magnetron sputter deposited SiO2 thin films10.1088/0022-3727/32/12/302 ↗
49. Production of MF and DC-pulse sputtered anti-reflective/anti-static optical interference coatings using a large area in-line coater10.1016/j.tsf.2005.07.270 ↗
50. Improvement of X-ray reflectivity analysis on surface and interface roughness estimation
51. Microstructure of sputter deposited TiO2/SiO2 multilayer optical coatings10.1557/PROC-654-AA3.38.1 ↗
52. A re-determination of the trichromatic coefficients of the spectral colours10.1088/1475-4878/30/4/301 ↗
53. Gage · 1981
54. Nanoindentation study of electrodeposited Ag thin coating: An inverse calculation of anisotropic elastic-plastic properties10.1016/j.surfcoat.2016.12.056 ↗
55. Nanoindentation and scratch resistance of multilayered TiO2-SiO2 coatings with different nanocolumnar structures deposited by PV-OAD10.1088/0022-3727/49/13/135104 ↗