Designing the microstructural constituents of an additively manufactured near β Ti alloy for an enhanced mechanical and corrosion response
Source abstract
Abstract
Additive manufacturing of near β-type Ti-13Nb-13Zr alloys using the laser powder bed fusion process (LPBF) opens up new avenues to tailor the microstructure and subsequent macro-scale properties that aids in developing new generation patient-specific, load-bearing orthopedic implants. In this work, we investigate a wide range of LPBF parameter space to optimize the volumetric energy density, surface characteristics and melt track widths to achieve a stable process and part density of greater than 99 %. Further, optimized sample states were achieved via thermal post-processing using standard capability aging, super-transus (900 °C) and sub-transus (660 °C) heat treatment strategies with varying quenching mediums (air, water and ice). The applied heat treatment strategies induce various fractions of α, martensite (α', α'') in combination with the β phase and strongly correlated with the observed enhanced mechanical properties and a relatively low elastic modulus. In summary, our work highlights a practical strategy for optimizing the mechanical and corrosion properties of a LPBF produced near β-type Ti-13Nb-13Zr alloy via careful evaluation of processing and post-processing steps and the interrelation to the corresponding microstructures. Corrosion studies revealed excellent corrosion resistances of the heat-treated LPBF samples comparable to wrought Ti-13Nb-13Zr alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Fatigue properties of a new generation ß-type Ti-Nb alloy for osteosynthesis with an industrial standard surface condition10.1016/j.ijfatigue.2017.05.024 ↗
2. Superhydrophilic nanostructured surfaces of beta Ti[sbnd]29Nb alloy for cardiovascular stent applications10.1016/j.surfcoat.2020.125965 ↗
3. Production of Porous β-Type Ti–40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing10.3390/ma6125700 ↗
4. Effect of thermomechanical processing on evolution of various phases in Ti–Nb–Zr alloys10.1016/j.jallcom.2004.04.113 ↗
5. Recent research and development in titanium alloys for biomedical applications and healthcare goods10.1016/j.stam.2003.09.002 ↗
6. Material characteristics and biocompatibility of low rigidity titanium alloys for biomedical applications
7. Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations: Theory and experiments10.1016/j.actamat.2007.04.024 ↗
8. Effect of Zr Content on Phase Stability, Deformation Behavior, and Young’s Modulus in Ti–Nb–Zr Alloys10.3390/ma13020476 ↗
9. Effect of Zr and Sn on Young’s modulus and superelasticity of Ti–Nb-based alloys10.1016/j.msea.2006.09.051 ↗
10. Phase stability change with Zr content in β-type Ti–Nb alloys10.1016/j.scriptamat.2007.08.003 ↗
11. Investigation of cast and annealed Ti25Nb10Zr alloy as material for orthopedic devices10.1016/j.jmrt.2019.06.006 ↗
12. New Ti–35Nb–7Zr–5Ta Alloy Manufacturing by Electron Beam Melting for Medical Application Followed by High Current Pulsed Electron Beam Treatment
13. Effect of Zr Content on Phase Stability, Deformation Behavior, and Young’s Modulus in Ti–Nb–Zr Alloys10.3390/ma13020476 ↗
14. Effect of Zr and Sn on Young’s modulus and superelasticity of Ti-Nb-based alloys10.1016/j.msea.2006.09.051 ↗
15. ASTM F1713 - 08(2013) Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130), (n.d.). https://www.astm.org/Standards/F1713.htm (accessed March 9, 2021).
16. Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting10.1016/j.jallcom.2018.05.179 ↗
17. Mechanical and corrosion behavior of titanium alloys additively manufactured by selective laser melting – A comparison between nearly β titanium, α titanium and α + β titanium10.1016/j.optlastec.2019.105625 ↗
18. Densification, microstructure evolution and fatigue behavior of Ti-13Nb-13Zr alloy processed by selective laser melting10.1016/j.powtec.2018.09.073 ↗
19. Breaking the limit of Young’s modulus in low-cost Ti–Nb–Zr alloy for biomedical implant applications10.1016/j.jallcom.2020.154401 ↗
20. Lowering of elastic modulus in the near-beta Ti–13Nb–13Zr alloy through heat treatment10.1080/02670836.2020.1732608 ↗
21. Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti-13Nb-13Zr10.1016/j.msea.2015.09.062 ↗
22. Fatigue behavior of arc melted Ti–13Nb–13Zr alloy10.1016/j.ijfatigue.2004.01.011 ↗
23. Influence of microstructure and alloying elements on corrosion behavior of Ti–13Nb–13Zr alloy10.1016/S0010-938X(03)00186-0 ↗
24. Enhanced mechanical compatibility of submicrocrystalline Ti–13Nb–13Zr alloy10.1016/j.msea.2010.04.057 ↗
25. Microstructure tailoring to enhance strength and ductility in Ti-13Nb-13Zr for biomedical applications10.1016/j.scriptamat.2013.08.028 ↗
26. Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution10.1016/j.corsci.2010.11.014 ↗
27. Composition Dependence of Young’s Modulus in Beta Titanium Binary Alloys10.4028/www.scientific.net/MSF.426-432.3103 ↗
28. Mechanical biocompatibilities of titanium alloys for biomedical applications10.1016/j.jmbbm.2007.07.001 ↗
29. Influence of microstructure and alloying elements on corrosion behavior of Ti-13Nb-13Zr alloy10.1016/S0010-938X(03)00186-0 ↗
30. Wear and corrosion behaviour of Ti–13Nb–13Zr and Ti–6Al–4V alloys in simulated physiological solution10.1016/j.corsci.2010.11.014 ↗
31. Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys10.1016/j.corsci.2014.02.017 ↗
32. Comprehensive review on alloy design, processing, and performance of β Titanium alloys as biomedical materials10.1080/09506608.2020.1735829 ↗
33. Microstructural Control of Additively Manufactured Metallic Materials10.1146/annurev-matsci-070115-031816 ↗
34. New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization10.1016/j.jmatprotec.2017.10.052 ↗
35. Selective laser melting of titanium alloy with 50 wt% tantalum: Microstructure and mechanical properties10.1016/j.jallcom.2015.11.141 ↗
36. Steels in additive manufacturing: A review of their microstructure and properties10.1016/j.msea.2019.138633 ↗
37. Misorientation-dependent solute enrichment at interfaces and its contribution to defect formation mechanisms during laser additive manufacturing of superalloys
38. J. Van Humbeeck, Microstructure and mechanical properties of Selective Laser Melted, 00 (2011).
39. Additive manufacturing of dense components in beta-titanium alloys with crystallographic texture from a mixture of pure metallic element powders10.1016/j.matdes.2019.107771 ↗
40. Fabrication of the beta-titanium alloy rods from a mixture of pure metallic element powders via selected laser melting10.4028/www.scientific.net/MSF.941.1260 ↗
41. In situ synthesis of a binary Ti–10at% Nb alloy by electron beam melting using a mixture of elemental niobium and titanium powders10.1016/j.jmatprotec.2020.116646 ↗
42. Mechanical properties of a newly additive manufactured implant material based on Ti-42Nb10.3390/ma11010124 ↗
43. Selective Laser Melting of Ti-45Nb Alloy
44. Synthesis and characterization of Ti-27.5Nb alloy made by CLAD® additive manufacturing process for biomedical applications10.1016/j.msec.2017.02.060 ↗
45. Processing a biocompatible Ti-35Nb-7Zr-5Ta alloy by selective laser melting10.1557/jmr.2020.90 ↗
46. Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys
47. High stability and high strength β-titanium alloys for additive manufacturing10.1016/j.msea.2021.141326 ↗
48. Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy10.1016/j.scriptamat.2011.03.024 ↗
49. A high strength and low modulus metastable β Ti-12Mo-6Zr-2Fe alloy fabricated by laser powder bed fusion in-situ alloying
50. Texture evolution, phase transformation and mechanical properties of selective laser melted Ti-13Nb-13Zr10.1016/j.matchar.2018.08.053 ↗
51. Microstructure and mechanical performance tailoring of Ti-13Nb-13Zr alloy fabricated by selective laser melting after post heat treatment10.1016/j.jallcom.2018.10.030 ↗
52. Metal Additive Manufacturing: A Review of Mechanical Properties10.1146/annurev-matsci-070115-032024 ↗
53. Additive manufacturing of strong and ductile Ti–6Al–4V by selective laser melting via in situ martensite decomposition10.1016/j.actamat.2014.11.028 ↗
54. Fabrication of four-level hierarchical topographies through the combination of LIPSS and direct laser interference pattering on near-beta titanium alloy10.1016/j.matlet.2021.130920 ↗
55. Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy10.1016/j.matdes.2021.109625 ↗
56. Influence of processing parameters on the fabrication of a Cu-Al-Ni-Mn shape-memory alloy by selective laser melting
57. Production of Ti-13Nb-13Zr alloy for surgical implants by powder metallurgy10.1007/s10853-010-4660-8 ↗
58. Two-dimensional detector software: From real detector to idealised image or two-theta scan10.1080/08957959608201408 ↗
59. In situ elaboration of a binary Ti–26Nb alloy by selective laser melting of elemental titanium and niobium mixed powders10.1016/j.msec.2016.02.033 ↗
60. Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys10.1016/j.msec.2011.06.011 ↗
61. Solute segregation and its influence on the microstructure and electrochemical behavior of Ti–Nb–Zr alloys10.1016/j.jallcom.2008.11.030 ↗
62. The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V10.1016/j.actamat.2019.01.039 ↗
63. Structure of orthorhombic martensitic phase in binary Ti–Nb alloys10.1063/1.3255966 ↗
64. The compctition between martensite and omega in quenched Ti-Nb alloys10.1007/BF02645135 ↗
65. The Titanium-Niobium System10.1038/201914a0 ↗
66. New surface-hardened, low-modulus, corrosion-resistant ti-13nb-13zr alloy for total hip arthroplasty
67. Thermal stability and phase transformations of martensitic Ti–Nb alloys10.1088/1468-6996/14/5/055004 ↗
68. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy10.1016/j.msea.2011.11.092 ↗
69. The effect of alloy composition on instabilities in the β phase of titanium alloys10.1016/j.scriptamat.2016.01.024 ↗
70. Banerjee · 2010
71. Microstructure and mechanical properties of selective laser melted biomaterial Ti-13Nb-13Zr compared to hot-forging10.1016/j.msea.2018.04.001 ↗
72. Effects of ω-phase precipitation on β→α, α′′ transformations in a metastable β titanium alloy10.1016/S0921-5093(00)01891-8 ↗
73. The role of heat treatment on microstructure and mechanical properties of Ti–13Zr–13Nb alloy for biomedical load bearing applications10.1016/j.jmbbm.2011.03.023 ↗
74. M. Bönisch, Structural properties, deformation behavior and thermal stability of martensitic Ti-Nb alloys, 2016.
75. Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti-Nb alloys10.1016/j.msec.2014.12.048 ↗
76. Enhanced twinning-induced plasticity effect by novel {315}α″/{332}β correlated deformation twins in a Ti-Nb alloy10.1016/j.ijplas.2021.103132 ↗
77. Twinning behavior of orthorhombic-α” martensite in a Ti-7.5Mo alloy10.1080/14686996.2019.1600201 ↗
78. Factors influencing the elastic moduli, reversible strains and hysteresis loops in martensitic Ti–Nb alloys10.1016/j.msec.2014.12.048 ↗
79. Beta Ti Alloys with Low Young’s Modulus10.2320/matertrans.45.2776 ↗
80. In situ synchrotron X-ray diffraction study of the martensitic transformation in superelastic Ti-24Nb-0.5N and Ti-24Nb-0.5O alloys10.1016/j.actamat.2015.01.014 ↗
81. Deformation twinning in the full-α″ martensitic Ti–25Ta–20Nb shape memory alloy10.1016/j.actamat.2015.12.001 ↗
82. Reversion of a Parent 310 α′′ Martensitic Twinning System at the Origin of 332 113 ©β Twins Observed in Metastable β Titanium Alloys10.1103/PhysRevLett.117.245501 ↗
83. T. Ozaki, H. Matsumoto, S. Watanabe, S. Hanada, Beta Ti Alloys with Low Young’s Modulus, (n.d.).
84. Effect of ageing on internal friction and elastic modulus of Ti–Nb alloys10.1016/j.msea.2006.03.124 ↗
85. Phase transformation of quenched α″ martensite by aging in Ti–Nb alloys10.1016/j.msea.2006.02.180 ↗
86. Development of Ti-Nb-Zr alloys with high elastic admissible strain for temporary orthopedic devices10.1016/j.actbio.2015.03.023 ↗
87. Titanium alloys in total joint replacement—a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
88. Surface characterization of oxides grown on the Ti–13Nb–13Zr alloy and their corrosion protection10.1016/j.corsci.2013.02.007 ↗
89. The passivation of alloys on titanium bases10.1016/0013-4686(74)85012-7 ↗
90. Oxide Film Thickening on Titanium in Aqueous Solutions in Relation to Anion Type and Concentration10.1179/000705981798274977 ↗
91. Kinetics of Open-Circuit Barrier Layer Formation on Metallic Surfaces in Aqueous Solutions10.5006/1.3583852 ↗
92. An ellipsometric study of the growth and open-circuit dissolution of the anodic oxide film on titanium10.1016/0013-4686(89)87123-3 ↗
93. Anodic growth of passive films on titanium10.1016/0013-4686(91)85200-Q ↗
94. Current Understanding of Ti Anodisation: Functional, Morphological, Chemical and Mechanical Aspects10.1515/CORRREV.2009.27.3.117 ↗
95. Anodic Oxidation of Titanium: From Technical Aspects to Biomedical Applications
96. Electrochemical Corrosion and Passivation Behavior of Titanium and Its Ti-6Al-4V Alloy in Low and Highly Concentrated HBr Solutions10.1016/S1452-3981(23)19695-7 ↗
97. Corrosion behavior of Ti–13Nb–13Zr alloy used as a biomaterial10.1016/j.jallcom.2008.09.026 ↗
98. Microstructural and Corrosion Evaluation of Laser Surface Nitrided Ti-13Nb-13Zr Alloy10.1179/026708404225010595 ↗
99. Correlation of the nanostructure of the anodic layers fabricated on Ti13Nb13Zr with the electrochemical impedance response10.1016/j.corsci.2015.01.041 ↗
100. Corrosion and Passivity of Ti-13% Nb-13% Zr in Comparison to Other Biomedical Implant Alloys10.5006/1.3290281 ↗