journal article·2024-04Open access

Mechanical softening of CuX alloys at elevated temperatures studied via high temperature scanning indentation

Marcel Sos, Gabrielle Tiphene, Jean-Luc Loubet, Sebastian Bruns, Enrico Bruder, Karsten Durst

Materials & Design· Volume 240

Abstract

The thermal stability and temperature dependent hardness of ultrafine-grained Cu-alloys CuSn5 and CuZn5 after high pressure torsion are investigated using the high temperature scanning indentation (HTSI) method. Fast indentations are carried out during thermal cycling of the samples (heating-holding-cooling) to measure hardness and strain rate sensitivity as a function of temperature and time. The microstructures after each thermal cycle are investigated to characterize the coarsening behaviour of both alloys. Results show that the thermal stability of the tested alloys can be expressed in terms of several temperature regimes: A fully stable regime, a transient regime in which growth of individual grains occurs, and finally a regime in which the microstructure is fully coarsened. The onset of grain growth is accompanied by high strain rate sensitivity on the order of 0.2–0.3. Furthermore, the obtained hardness and strain rate sensitivity values are in good agreement with continuous stiffness measurement (CSM) and strain rate jump (SRJ) experiments. This highlights the applicability of the HTSI method to the characterization of the thermomechanical properties of ultrafine-grained alloys.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. A review on high-pressure torsion (HPT) from 1935 to 198810.1016/j.msea.2015.11.074 ↗
3. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
4. Paradox of strength and ductility in metals processed by severe plastic deformation10.1557/JMR.2002.0002 ↗
5. Extreme grain refinement by severe plastic deformation: a wealth of challenging science10.1016/j.actamat.2012.10.038 ↗
6. Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses10.1007/s10853-006-0700-9 ↗
7. Twenty-five years of ultrafine-grained materials: achieving exceptional properties through grain refinement10.1016/j.actamat.2013.08.018 ↗
8. Strain rate sensitivity of ultrafine-grained aluminium processed by severe plastic deformation10.1016/j.scriptamat.2005.03.043 ↗
9. Temperature and strain rate effects on the strength and ductility of nanostructured copper10.1063/1.1618370 ↗
10. Combination of nanoindentation and microscopy for the examination of aluminum alloys in Coarse- and ultrafine-grained condition10.3139/147.110571 ↗
11. Record superplastic ductility in a magnesium alloy processed by Equal-Channel Angular pressing10.1002/adem.200700315 ↗
12. Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper10.1016/j.actamat.2019.12.044 ↗
13. Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature10.1016/j.msea.2013.07.033 ↗
14. Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals10.1016/j.msea.2004.03.064 ↗
15. Strain rate sensitivity and apparent activation volume measurements on equal channel angular extruded cu processed by one to twelve passes10.1016/j.scriptamat.2004.05.021 ↗
16. Transition from strengthening to softening by grain boundaries in ultrafine-grained cu10.1016/j.actamat.2004.07.003 ↗
17. Strain rate sensitivity of ultrafine grained aluminium alloy AA606110.4028/www.scientific.net/MSF.584-586.741 ↗
18. High-strain-rate response of ultra-fine-grained copper10.1016/j.actamat.2008.02.023 ↗
19. Influence of grain boundaries on steady-state deformation resistance of ultrafine-grained cu
20. Influence of grain boundaries on the deformation resistance: insights from an investigation of deformation kinetics and microstructure of copper after predeformation by ECAP10.1080/14786435.2013.828161 ↗
21. Thermal behavior of copper processed by ECAP with and without back pressure10.1016/j.msea.2015.01.021 ↗
22. Microstructural evolution, microhardness and thermal stability of HPT-processed cu10.1016/S0921-5093(00)00919-9 ↗
23. Dislocation density evolution during high pressure torsion of a nanocrystalline Ni–Fe alloy10.1063/1.3095852 ↗
24. Microstructural investigation of the annealing behaviour of high-pressure torsion (HPT) deformed copper10.1016/j.msea.2005.11.085 ↗
25. On the room-temperature grain growth in nanocrystalline copper10.1016/0956-716X(94)90432-4 ↗
26. Thermal stability of ultrafine grained copper10.1103/PhysRevB.65.094106 ↗
27. Thermal stability in bulk cryomilled ultrafine-grained 5083 al alloy10.1007/s11661-006-0044-8 ↗
28. Long-time stability of metals after severe plastic deformation: softening and hardening by self-annealing versus thermal stability10.1016/j.msea.2018.05.079 ↗
29. Solid solution hardening effects on structure evolution and mechanical properties of nanostructured binary and high entropy alloys after high pressure torsion10.1088/1757-899X/1249/1/012003 ↗
30. Microstructures and mechanical properties of ultrafine grained 7075 al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
31. Microstructural evolution, strengthening and thermal stability of an ultrafine-grained Al–Cu–Mg alloy10.1016/j.actamat.2016.02.050 ↗
32. Elevated temperature, nano-mechanical testing in situ in the scanning electron microscope10.1063/1.4795829 ↗
33. New ultra-high temperature nanoindentation system for operating at up to 1100 °C10.1016/j.matdes.2020.108727 ↗
34. Room temperature viscous flow of amorphous silica induced by electron beam irradiation10.1002/advs.202205237 ↗
35. Hot nanoindentation in inert environments10.1063/1.3436633 ↗
36. Nanoindentation and contact-mode imaging at high temperatures10.1557/jmr.2006.0080 ↗
37. High-temperature scanning indentation: a new method to investigate in situ metallurgical evolution along temperature ramps10.1557/s43578-021-00107-7 ↗
38. Quantification of softening kinetics in cold-rolled pure aluminum and copper using high-temperature scanning indentation10.1016/j.matdes.2023.112171 ↗
39. High-temperature scanning indentation (HTSI): compréhension des essais de nanoindentation lors des transformations physiques de matériaux métalliques à haute température
40. Influence of solute effects on the saturation grain size and rate sensitivity in cu-X alloys10.1016/j.scriptamat.2017.09.031 ↗
41. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
42. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
43. A new method for analyzing data from continuous depth-sensing microindentation tests10.1557/JMR.1990.0123 ↗
44. Indenter materials for high temperature nanoindentation10.1063/1.4824710 ↗
45. Thermally activated deformation behavior of ufg-au: environmental issues during long-term and high-temperature nanoindentation testing10.1007/s11837-015-1638-7 ↗
46. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
47. The cu-sn (copper-tin) system10.1007/BF03029299 ↗
48. Novel high temperature vacuum nanoindentation system with active surface referencing and non-contact heating for measurements up to 800 °C10.1063/1.5029873 ↗
49. Strain-rate sensitivity of glasses10.1016/j.jnoncrysol.2014.08.023 ↗
50. Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline ni and ultrafine-grained al10.1557/jmr.2011.156 ↗
51. Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume10.1007/s11837-017-2536-y ↗