journal article·2023-10Open access

Joining of additively manufactured fiber-reinforced thermoplastic and metals by ultrasonic energy: Mechanical and corrosion behavior

Willian S. de Carvalho, Guilherme S. Vacchi, Carlos A.D. Rovere, Sergio T. Amancio-Filho

Materials & Design· Volume 234

Abstract

Ultrasonic joining (U-Joining) is applied to create reinforced hybrid joints between unreinforced or fiber-reinforced polymers and surface-structured metals. While the feasibility of joining additively manufactured (AM) materials was already demonstrated, a detailed description of the process parameters’ effects is still missing. Therefore, this study aims to define the influence of the U-Joining parameters on the mechanical and corrosion properties of AM 20% short-carbon-fiber-reinforced poly-ether-ether-ketone (PEEK-20CF) and 316L stainless steel (316L SS) hybrid joints. Optimal joining parameters were determined via Box-Behnken design of experiments to maximize the joints’ ultimate lap shear forces (ULSF) and displacement at break (DaB), where the results increased from 1.4 ± 0.2 kN to 3.6 ± 0.3 kN (2.6 times) and from 1.2 ± 0.3 mm to 2.4 ± 0.1 mm (2 times), respectively. Microstructural analyses revealed a strong micromechanical interlocking between the parts due to the filling of crevices at the as-built AM metallic part’s rough surface by consolidated PEEK-20CF, which resulted in a mixture of adhesive, cohesive and net tension failure during the lap-shear tests. Finally, the corrosion resistance was also evaluated by potentiodynamic polarization curves, showing that the energy input during the joining cycle slightly reduced the pitting corrosion resistance of the 316L part.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. European commission (EC), “Updated analysis of the non-CO2 effects of aviation,” Nov. 24, 2020. https://ec.europa.eu/clima/news-your-voice/news/updated-analysis-non-co2-effects-aviation-2020-11-24_en (accessed Oct. 28, 2022).
2. Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration10.1016/j.matdes.2010.07.018 ↗
3. Quasi-static and dynamic performance of novel interlocked hybrid metal-composite joints10.1016/j.compstruct.2020.112769 ↗
4. Airbus takes on boeing with reinforced plastic A350 XWB10.1016/S0034-3617(07)70383-1 ↗
5. Bombardier throws down the gauntlet with CSeries airliner10.1016/S0034-3617(11)70181-3 ↗
6. Diffusion of metals in polymers10.1016/S0927-796X(97)00020-X ↗
7. Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints10.1016/j.compstruct.2020.113324 ↗
8. B. C. P. Jongbloed, J. J. E. Teuwen, R. Benedictus, and I. F. Villegas, “A Study on Through-the-Thickness Heating in Continuous Ultrasonic Welding of Thermoplastic Composites,” Mater. 2021, Vol. 14, Page 6620, vol. 14, no. 21, p. 6620, Nov. 2021, doi: 10.3390/MA14216620.10.3390/ma14216620 ↗
9. Damage monitoring of adhesively bonded composite-metal hybrid joints using carbon nanotube-based sensing layer10.1080/20550324.2019.1699229 ↗
10. R. W. Messler, “Joining of Materials and Structures: From Pragmatic Process to Enabling Technology,” Join. Mater. Struct. From Pragmatic Process to Enabling Technol., pp. 1–790, 2004, doi: 10.1016/B978-0-7506-7757-8.X5000-3.10.1016/B978-0-7506-7757-8.X5000-3 ↗
11. Joining of polymer-metal hybrid structures: Principles and applications
12. W. S. de Carvalho, M. C. Vioreanu, M. R. A. Lutz, G. P. Cipriano, and S. T. Amancio-Filho, “The Influence of Tool Wear on the Mechanical Performance of AA6061-T6 Refill Friction Stir Spot Welds,” Mater. 2021, Vol. 14, Page 7252, vol. 14, no. 23, p. 7252, Nov. 2021, doi: 10.3390/MA14237252.10.3390/ma14237252 ↗
13. E. E. Feistauer, R. P. M. Guimarães, T. Ebel, J. F. Dos Santos, and S. T. Amancio-Filho, “Ultrasonic joining: A novel direct-assembly technique for metal-composite hybrid structures,” Mater. Lett., vol. 170, pp. 1–4, May 2016, doi: 10.1016/J.MATLET.2016.01.137.10.1016/j.matlet.2016.01.137 ↗
14. V. Di Giandomenico, “Surface structured bonded composite-metal joint,” Ph.D. Diss. Cranf. Univ. 2014, Accessed: Oct. 28, 2022. [Online]. Available: https://dspace.lib.cranfield.ac.uk/handle/1826/9308.
15. On the feasibility of joining additively-manufactured 316L stainless steel and poly-ether-ether-ketone by ultrasonic energy
16. R. Oluleke, “Metallurgical Performance of Hyper - Joints In Composite to Metal Joining,” Ph.D. Diss. Univ. Manchester, 2015, Accessed: Oct. 28, 2022. [Online]. Available: https://www.research.manchester.ac.uk/portal/en/theses/metallurgical-performance-of-hyper--joints-in-composite-to-metal-joining(6a87e957-d6f1-4d78-b989-a68dc39d41cf).html.
17. The dynamics of laser surface modification10.1016/j.jmapro.2015.10.002 ↗
18. Experimental investigation of a novel hybrid metal–composite joining technology10.1016/j.compositesa.2009.11.003 ↗
19. Static strength of metal-composite joints with penetrative reinforcement10.1016/j.compstruct.2014.07.019 ↗
20. ComeldTM: an innovation in composite to metal joining
21. New possibility for the connection of metal sheets and fiber reinforced plastics10.4028/www.scientific.net/MSF.690.465 ↗
22. E. E. Feistauer, “Ultrasonic joining of through-the-thickness reinforced metal-composite hybrid structures,” Ph.D. Diss. Tech. Univ. Hamburg, 2019, doi: 10.15480/882.1956.
23. W. S. de Carvalho and S. T. Amancio-Filho, “Ultrasonic joining of additively manufactured metal-polymer lightweight hybrid structures,” in Annual Technical Conference - ANTEC, Conference Proceedings, vol. 1, p. 526.
24. W. S. De Carvalho, N. F. Colvin, A. Benatar, and S. T. Amancio-Filho, “Ultrasonic Joining of Additively Manufactured Metal-Composite Hybrid Joints: A Comparison between Vertical and Horizontal Vibration Modes,” Met. 2023, Vol. 13, Page 319, vol. 13, no. 2, p. 319, Feb. 2023, doi: 10.3390/MET13020319.10.3390/met13020319 ↗
25. Ultrasonic welding of advanced thermoplastic composites: An investigation on energy-directing surfaces10.1002/adv.20178 ↗
26. An investigation of the ultrasonic joining process parameters effect on the mechanical properties of metal-composite hybrid joints10.1007/s40194-020-00927-x ↗
27. Micro-pins: the next step in composite–composite and metal–composite joining10.1007/s12567-019-00251-1 ↗
28. Effect of laser scan pattern in laser powder bed fusion process: the case of 316L stainless steel10.1016/j.prostr.2022.03.016 ↗
29. Washko · Wrought Stainless Steels, Properties and Selection: Irons, Steels, and High-Performance Alloys · 1990 · Vol 1 · 841
30. Fatigue life assessment and fracture mechanisms of additively manufactured metal-fiber reinforced thermoplastic hybrid structures produced via ultrasonic joining10.1016/j.jmrt.2023.08.305 ↗
31. “ASTM B962-15 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle, American Society for Testing and Materials, Pennsylvania, United States.” https://www.astm.org/b0962-15.html (accessed Nov. 30, 2022).
32. Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions10.1016/j.polymertesting.2023.108207 ↗
33. “PEEK+CF20 Professional Carbon Fiber 3D Printing Filament.” https://www.3dxtech.com/product/carbonx-peek-cf20/ (accessed Mar. 19, 2023).
34. Myers · 2016
35. “ASTM E384-11 Standard Test Method for Knoop and Vickers Hardness of Materials, American Society for Testing and Materials, Pennsylvania, United States” doi: 10.1520/E0384-11.10.1520/E0384-11 ↗
36. “ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements, American Society for Testing and Materials, Pennsylvania, United States” Accessed: Nov. 30, 2022. [Online]. Available: https://www.astm.org/g0005-94r11e01.html.
37. A review on the hybrid titanium composite laminates (HTCLs) with focuses on surface treatments, fabrications, and mechanical properties10.1016/j.compositesa.2019.105679 ↗
38. Improving the adhesion of thin stainless steel sheets for fibre metal laminate (FML) applications10.1163/156856105774805840 ↗
39. The determination of pitting potentials10.1016/0010-938X(81)90007-X ↗
40. The development of design rules for selective laser melting
41. On the quality of unsupported overhangs produced by laser powder bed fusion10.1504/IJMR.2019.100012 ↗
42. Study on the designing rules and processability of porous structure based on selective laser melting (SLM)10.1016/j.jmatprotec.2013.05.001 ↗
43. investigation of the accuracy and roughness in the laser powder bed fusion process10.1080/17452759.2018.1426368 ↗
44. Using a monocular optical microscope to assemble a wetting contact angle analyser10.1016/j.measurement.2013.07.010 ↗
45. Effect of surface treatments on the laser welding performance of dissimilar materials10.1016/j.jmapro.2021.12.044 ↗
46. Composite surface pre-treatments: Improvement on adhesion mechanisms and mechanical performance of metal–composite friction spot joints with additional film interlayer10.1080/00218464.2017.1378101 ↗
47. Plastics joining
48. H. Potente, Fügen von Kunststoffen Grundlagen, Verfahren, Anwendung. Hanser, 2004, 2004. Accessed: Nov. 27, 2022. [Online]. Available: https://books.google.com/books/about/Fügen_von_Kunststoffen.html?id=J9K5wAEACAAJ.
49. Analysis of the friction (spin)-welding process for thermoplastics10.1007/BF00547450 ↗
50. Heating and bonding mechanisms in ultrasonic welding of thermoplastics10.1002/pen.760231307 ↗
51. thermoplastics and thermoplastic composites: Technical information for plastics users
52. thermomechanical modeling of the metallic rivet in friction riveting of amorphous thermoplastics10.1007/s40194-020-01049-0 ↗
53. On the feasibility of a friction-based staking joining method for polymer–metal hybrid structures10.1016/j.matdes.2015.12.087 ↗
54. Ultrasonic torsion welding of ageing-resistant Al/CFRP joints: Properties, microstructure and joint formation10.1016/j.ultras.2018.11.006 ↗
55. 3D printing of polyether-ether-ketone for biomedical applications10.1016/j.eurpolymj.2019.02.035 ↗
56. Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies10.1016/j.polymdegradstab.2010.01.024 ↗
57. Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel10.1016/j.matdes.2012.12.015 ↗
58. Tailor-made functional composite components using additive manufacturing and hot isostatic pressing10.1080/00325899.2021.1901398 ↗
59. Investigating the hot isostatic pressing of an additively manufactured continuous carbon fiber reinforced PEEK composite10.1016/j.addma.2020.101634 ↗
60. C. Qiu, M. Al Kindi, A. S. Aladawi, and I. Al Hatmi, “A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel,” Sci. Reports 2018 81, vol. 8, no. 1, pp. 1–16, May 2018, doi: 10.1038/s41598-018-26136-7.10.1038/s41598-018-26136-7 ↗
61. Evolution and impact of oxygen inclusions in 316L stainless steel manufactured by laser powder bed fusion
62. Effect of annealing on the mechanical and corrosion properties of 316L stainless steel manufactured by laser powder bed fusion10.1016/j.msea.2022.144263 ↗
63. Influence of scanning strategy and building direction on microstructure and corrosion behaviour of selective laser melted 316L stainless steel10.1016/j.matdes.2021.109999 ↗