Discontinuous lath martensite transformation and its relationship with annealing twin of parent austenite and cooling rate in low carbon RAFM steel
Source abstract
Abstract
Lath martensite transformation in low carbon steel relates to the discontinuity of the transformation rate, which exhibits a series of martensite transformation rate maxima (peaks), especially in low cooling rates. In the present work, we put an emphasis on the influence of annealing twins in parent austenite grains (PAGs) and cooling rates on the discontinuity of lath martensite transformation rate in a low carbon reduced activation ferritic/martensitic (RAFM) steel. Lath martensite microstructure is hierarchical and the lath martensite transformation rate peaks are hierarchical during the cooling process. If the cooling rate was not high enough, the lath martensite transformation rate peaks will be divided into two groups by annealing twins in parent austenite. These transformation rate peaks in the first group were mainly caused by lath martensite transformation in the non–twin zones in the PAGs. Then, the second group mainly consisted of a single transformation rate peak, which was primarily caused by the martensite transformation in the twin zones in the PAGs. In the present work, a new “localized stress field” theory is proposed and successfully used for interpreting the classification mechanism of lath martensite transformation rate peaks and the evolution of these peaks with changing cooling rate.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Status of reduced activation ferritic / martensitic steel development10.1016/j.jnucmat.2007.03.036 ↗
2. Fracture toughness of low activation ferritic steel (JLF-1) weld joint at room temperature10.1016/S0022-3115(98)00172-X ↗
3. Effects of tantalum content on the microstructure and mechanical properties of low-carbon RAFM steel10.1016/j.jnucmat.2016.07.029 ↗
4. Effect of thermal ageing on tensile and creep properties of JLF-1 and CLAM steels10.1016/j.jnucmat.2008.12.149 ↗
5. Effect of carbon content on variant pairing of martensite in Fe–C alloys10.1016/j.actamat.2012.09.046 ↗
6. Crystallography of austenite decomposition
7. Over the mechanisms of steel hardening
8. Mechanism of transformation from face-centred to body-centred cubic lattice
9. Einfluss der α-γ-umwandlung eines irreversiblen nickelstahls auf kristall-orientierung und zugfestigkeit
10. Accurate measurement of the orientation relationship of lath martensite and bainite by electron backscatter diffraction analysis10.1016/j.scriptamat.2009.02.053 ↗
11. On the orientation relationships between retained austenite and “lath” martensite10.1007/BF02658328 ↗
12. Microstructure and mechanical behaviour of ferrous martensite10.4028/www.scientific.net/MSF.56-58.157 ↗
13. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
14. Crystallographic features of lath martensite in low-carbon steel10.1016/j.actamat.2005.11.001 ↗
15. Martensite in steel: strength and structure10.1016/S0921-5093(99)00288-9 ↗
16. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
17. Effect of microstructural refinement on the toughness of low carbon martensitic steel10.1016/j.scriptamat.2007.10.053 ↗
18. Measurement and interpretation of isothermal martensitic kinetics10.1007/BF02814878 ↗
19. Laughlin · 2008
20. Kinetics of anomalous multi-step formation of lath martensite in steel10.1016/j.actamat.2014.08.031 ↗
21. The nucleation of martensite
22. Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis10.1179/1743284714Y.0000000532 ↗
23. Martensite formation kinetics of substitutional Fe–0.7at.%Al alloy under uniaxial compressive stress10.1016/j.actamat.2015.07.028 ↗
24. The non-equilibrium phase transition theory of martensitic transformation10.1088/0305-4608/14/3/022 ↗
25. Dynamic model of supersonic martensitic crystal growth10.3367/UFNe.0181.201104a.0345 ↗
26. A thermo-kinetic model for martensitic transformation kinetics in low-alloy steels10.1016/j.jallcom.2015.05.266 ↗
27. A general mechanism of martensitic nucleation: Part I. General concepts and the FCC → HCP transformation
28. Kinetics of strain-induced martensitic nucleation10.1007/BF02672301 ↗
29. Effect of internal stress on autocatalytic nucleation of martensitic transformation10.1007/s11661-006-0085-z ↗
30. Distributed-activation kinetics of10.1007/BF02646117 ↗
31. Unusual martensite-formation kinetics in steels : observation of discontinuous transformation rates10.1016/j.actamat.2013.11.052 ↗
32. Martensitic nucleation and the role of the nucleating defect
33. Initial nucleation kinetics of martensite transformation10.1007/s10853-008-2753-4 ↗
34. In situ observations and crystallographic analysis of martensitic transformation in steel10.1016/j.actamat.2013.04.065 ↗
35. Burst phenomenon in the martensitic transformation10.1007/BF03397387 ↗
36. Kinetics of burst transformation to martensite
37. Abnormal austenite-ferrite transformation behaviour in substitutional Fe-based alloys10.1016/S1359-6454(02)00434-2 ↗
38. Kinetics of the abnormal austenite-ferrite transformation behaviour in substitutional Fe-based alloys10.1016/j.actamat.2004.02.003 ↗
39. Isothermal character and cooling rate dependence of lath martensitic transformation in Fe-15%Ni alloy10.1016/0036-9748(87)90160-8 ↗
40. Thermally activated growth of lath martensite in Fe–Cr–Ni–Al stainless steel10.1179/1743284714Y.0000000583 ↗
41. The kinetics of martensite formation in steel10.1007/BF02814877 ↗
42. Martensitic transformation and stress partitioning in a high-carbon steel10.1016/j.scriptamat.2012.06.027 ↗
43. On the effect of fine grain size on the Ms temperature in Fe-27Ni-0.025C alloys
44. In-situ characterization of martensitic transformation in high carbon steel under continuous-cooling condition10.1016/j.matpr.2015.07.437 ↗
45. In situ observation of kinetic processes of lath Bainite nucleation and growth by laser scanning confocal microscope in reheated weld metals10.1007/s11661-017-4348-7 ↗
46. A new approach to quantitative analysis of bainitic transformation in a superbainite steel10.1016/j.scriptamat.2013.01.033 ↗
47. Quantitative analysis of variant selection in ausformed lath martensite10.1016/j.actamat.2011.11.018 ↗
48. Mapping the parent austenite orientation reconstructed from the orientation of martensite by EBSD and its application to ausformed martensite10.1016/j.actamat.2010.08.001 ↗
49. The austenite/lath martensite interface in steels: Structure, athermal motion, and in-situ transformation strain revealed by simulation and theory10.1016/j.actamat.2017.05.044 ↗
50. The orientation relationship between lath martensite and austenite in low carbon, low alloy steels10.1016/0956-7151(90)90180-O ↗
51. Real-time synchrotron X-ray diffraction study on the isothermal martensite transformation of maraging steel in high magnetic fields10.1107/S0021889812024892 ↗
52. The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels10.1016/j.actamat.2013.06.043 ↗
53. Key factors in grain refinement of martensite and bainite10.4028/www.scientific.net/MSF.638-642.3044 ↗