Fabrication of low thermal expansion Fe–Ni alloys by in-situ alloying using twin-wire arc additive manufacturing
Source abstract
Abstract
The binary Fe–Ni system offers alloys with notably low linear coefficients of thermal expansion (CTE), contingent upon their Ni content. In this respect twin-wire arc additive manufacturing (T-WAAM) presents the opportunity of in-situ alloying through the simultaneous feeding of two metal wires into a weld pool to obtain desired alloy compositions. This study aims to deposit a graded wall with Ni contents targeted at 42, 46, and 52 wt% in the building direction of the wall, along with a block comprising of 46 wt% Ni, employing the T-WAAM approach. The results show effective incorporation of additional Ni into the weld pool and geometrically stable weld beads in the continuous metal transfer mode during the T-WAAM process. This mode led to the defect-free and chemically stable deposition of the graded wall and the block with average Ni contents of 42.3 ± 1.1, 45.8 ± 1.4, 52.6 ± 0.8 wt%, and 46.4 ± 0.9 wt%, respectively. The Curie temperature measurements of the as-deposited alloys and the mean CTE values of alloy 46 were found to be comparable to the commercial alloys. In summary, this study validates the feasibility of in-situ deposition of low thermal expansion alloy compositions, thereby enabling the possibility of on-demand thermal expansion properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Fe-Ni invar alloys: a review
2. E. F. Wassermann, The Invar problem, 1991.10.1016/0304-8853(91)90828-X ↗
3. The selection of process parameters in additive manufacturing for aerospace alloys10.1007/s00170-017-0280-7 ↗
4. Mechanical properties of invar 36 alloy additively manufactured by selective laser melting10.1016/j.msea.2019.138799 ↗
5. Low-expansion alloys introduction and overview. [Online]. Available: http://ebookcentral.proquest.com/lib/delft/detail.action?docID=3002339.
6. The invar problem10.1063/1.1656337 ↗
7. Invar anomaly10.1063/1.1658625 ↗
8. “Low-Expansion alloys,” ASM Handbook Volume 2:Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2. ASM International, p. 889, 1990. doi: 10.1361/asmhba0001099.10.31399/asm.hb.v02.a0001099 ↗
9. M. Shiga, 340 lnvar alloys.10.1016/S1359-0286(96)80023-4 ↗
10. On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion10.1016/j.matdes.2018.10.025 ↗
11. Mills · 2012
12. K. Treutler and V. Wesling, “The current state of research of wire arc additive manufacturing (Waam): A review,” Applied Sciences (Switzerland), vol. 11, no. 18. MDPI, Sep. 01, 2021. doi: 10.3390/app11188619.10.3390/app11188619 ↗
13. B. Tomar, S. Shiva, T. Nath, A review on wire arc additive manufacturing: Processing parameters, defects, quality improvement and recent advances, Materials Today Communications, vol. 31. Elsevier Ltd, Jun. 01, 2022. doi: 10.1016/j.mtcomm.2022.103739.10.1016/j.mtcomm.2022.103739 ↗
14. Additive manufacturing of functionally graded materials: a review10.1016/j.msea.2019.138209 ↗
15. A review on functionally gradient materials (FGMs) and their applications”, in IOP conference series: materials science and engineering
16. Fabrication and characterization of functionally graded material (FGM) structure containing two dissimilar steels (ER70S-6 and 308LSi) by wire arc additive manufacturing (WAAM)
17. Additive manufacturing of a functionally graded material from Ti-6Al-4V to invar: experimental characterization and thermodynamic calculations10.1016/j.actamat.2016.12.070 ↗
18. Experimental analysis and thermodynamic calculations of an additively manufactured functionally graded material of v to invar 3610.1557/jmr.2018.92 ↗
19. Developing gradient metal alloys through radial deposition additive manufacturing10.1038/srep05357 ↗
20. Steel-copper functionally graded material produced by twin-wire and arc additive manufacturing (T-WAAM)10.1016/j.matdes.2021.110270 ↗
21. Directed energy deposition of invar 36 alloy using cold wire pulsed gas tungsten arc welding: effect of heat input on the microstructure and functional behaviour10.1016/j.jmrt.2023.06.280 ↗
22. Arcelor Mittal, M93 PIPES AND TUBES FOR LNG TRANSFER LINES-WELDING PROCESSES (Stainless & Nickel Alloys). Accessed: Jul. 21, 2023. [Online]. Available: https://www.spacematdb.com/spacemat/manudatasheets/Invar%20M93.pdf.
23. ASTM International, Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis 1, 2019, doi: 10.1520/E0831-19.10.1520/E0831-19 ↗
24. Balancing WAAM production costs and wall surface quality through parameter selection: a case study of an Al-Mg5 alloy multilayer-non-oscillated single pass wall
25. T. DebRoy et al., Additive manufacturing of metallic components – Process, structure and properties, Progress in Materials Science, vol. 92. Elsevier Ltd, pp. 112–224, Mar. 01, 2018. doi: 10.1016/j.pmatsci.2017.10.001.10.1016/j.pmatsci.2017.10.001 ↗
26. S. Kou, Welding metallurgy second edition, 2003. [Online]. Available: www.copyright.com.
27. Investigation on microstructure and properties of laser solid formed low expansion invar 36 alloy10.1016/j.jmrt.2020.03.108 ↗
28. Effect of the heat input on wire-arc additive manufacturing of invar 36 alloy: microstructure and mechanical properties10.1007/s40194-022-01295-4 ↗
29. On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion10.1016/j.matdes.2018.10.025 ↗
30. Selective laser melting of invar 36: microstructure and properties10.1016/j.actamat.2015.10.020 ↗
31. W.C. Leslie, E. Hornbogen, Chapter 17 – Physical metallurgy of steels, in: Physical Metallurgy, Fourth Edition, R. W. Cahn, P. Haasen (Eds.), Oxford: North-Holland, 1996, pp. 1555–1620. doi: https://doi.org/10.1016/B978-044489875-3/50022-3.10.1016/B978-044489875-3/50022-3 ↗
32. A new method for determining the curie temperature using a dilatometer10.1088/0957-0233/21/10/105106 ↗
33. L.L. Harner, Controlled expansion alloys. Accessed: Sep. 04, 2023. [Online]. Available: https://www.carpentertechnology.com/blog/selecting-controlled-expansion-alloys.
34. Effect of minor alloying elements on the mean thermal expansion coefficient of Fe-36% Ni invar alloy10.2355/tetsutohagane1955.80.12_944 ↗
35. V. M. Kalinin, F. N. Dunaev, and V. A. Kornyakov, “Effect of alloying elements point of Fe-Ni invar alloys, 1970.10.1007/BF00823460 ↗
36. Effect of cobalt on microstructure and mechanical properties of invar alloy, in lecture notes in mechanical engineering
37. Influence of residual stress on thermal expansion behavior10.1063/1.125329 ↗
38. B. D. Cullity and C. D. Graham, “Introduction to magnetic materials second edition introduction to magnetic materials.
39. Residual stresses in wire-arc additive manufacturing – hierarchy of influential variables
40. “Residual stress formation in laser-based powder bed fusion (PBF-LB) of invar 36”, in ASTM special technical publication
41. ASTM International, Standard specification for iron-nickel sealing alloys, 2017, doi: 10.1520/F0030-96R17.10.1520/F0030-96R17 ↗