journal article·2026-06Open access

A new approach to enhance the efficiency of local squeezing during high pressure die casting of aluminum alloys

Viktor Nyeste, Tamás Mikó, Ágota Kazup, Monika Mende-Tokárová, Dániel Molnár, Valéria Mertinger

Materials & Design· Volume 266

Abstract

• New approach to squeeze pin parameters enhances queezing efficiency in high pressure die casting. • The stroke of the squeeze pin provides details of solid fraction in the squeezed region. • Squeeze pin velocity is more important than the delay time for EN AC 46000 alloy during squeezing. • Reduced squeeze velocity can provide stable mechanical properties independent of delay time. High Pressure Die Casting (HPDC) produces near-net-shape components with varying wall thicknesses, leading to heterogeneous solidification conditions. These effects led to inhomogeneities, which significantly affect mechanical properties. Local squeezing is a standard approach for minimising shrinkage porosity. We applied local squeezing at the industrial standard and at two magnitudes lower speeds: 27.5 mm/s and 0.7 mm/s. We varied the delay time, a typically used parameter in industrial practice, between 0.0 and 3.0 s. During the intervention, we recorded the complete motion curve of the squeezing pin. We took a sample from the squeezed volume and characterised its porosity distribution by density measurements, computed tomography, and scanning electron microscopy. The tensile strength of the squeezed volume was also measured. From the results, we concluded that the squeeze pin movement speed has a much stronger effect on the success of squeezing, i.e., the reduction of porosity. Based on microstructural examinations, we showed that the key to successful squeezing is selecting the optimal melt-to-solid ratio, which correlates with the maximum distance the squeeze pin travels. These results contribute significantly to the development of a monitoring system that can increase squeezing efficiency by orders of magnitude compared to current industrial practice.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Correlation between microstructures and mechanical properties of super-sized new-energy automobile structural component formed by vacuum HPDC process10.1016/j.jmrt.2025.03.198 ↗
2. Pressure assisted processes for high integrity aluminum castings10.1007/BF03355420 ↗
3. Solidification microstructure and critical conditions of shrinkage porosity generation in die casting process of JIS-ADC12 (A383) alloy10.2320/matertrans.F-M2013806 ↗
4. Fundamentals of solidification
5. D. Künstner, ‘Untersuchung der Wirkung von lokalem Nachverdichten im Druckgießverfahren und Entwicklung einer geeigneten Versuchsform zur Bestimmung optimaler Nachverdichtungsparameter’, Diploma Thesis, Leoben, 2013.
6. D. M. Stefanescu, ASM Metals HandBook Volume 15 - Casting, vol. 15. ASM International, 1988.
7. P. Borlepwar and S. Biradar, ‘Study on Reduction in Shrinkage Defects in HPDC Component by Optimisation of Localised Squeezing Process’, Inter Metalcast, vol. 13, no. 4, pp. 915–922, Oct. 2019, doi: 10.1007/s40962-018-00295-9.10.1007/s40962-018-00295-9 ↗
8. Ferencz Peti et al, The Effect of Squeeze Pin Dimension and Operational Parameters on Material Homogenity of Aluminium High Pressure Die Cast Parts’, Acta Marisiensis. Seria Technologica, pp. 7–12, Dec. 2019, doi: 10.2478/amset-2019-0010.10.2478/amset-2019-0010 ↗
9. A feasibility study of the partial squeeze and vacuum die casting process10.1016/S0924-0136(00)00557-4 ↗
10. M. Tsuji, T. Nakano, and T. Toyoshima, ‘Szabadalom - DRIVE CONTROL METHOD FOR A SQUEEZE PIN’, US 2002/0167104A1, Nov. 14, 2002.
11. M. Tsuji, ‘PATENT - SQUEEZE PIN CONTROL SYSTEM IN DIE CASTING MACHINE’, USO05787963A, Aug. 04, 1998.
12. X. Niu, M. Anthony, and P. Tuzi, ‘High Pressure Leak Tightness Improvement by a Unique Local Squeezing Process’, Cast Expo ’08.
13. Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidification10.1016/S1359-6454(98)00342-5 ↗
14. Relationship between tensile and shear strengths of the mushy zone in solidifying aluminum alloys10.1007/s11661-003-0212-z ↗
15. H. Suzuki, and S. Shigeyoshi, ‘A Die-casting method’, Aug. 24, 1981.
16. A. E. Salas Reyes et al., ‘Microstructural, microscratch and nanohardness mechanical characterisation of secondary commercial HPDC AlSi9Cu3-type alloy’, Journal of Materials Research and Technology, vol. 9, no. 4, pp. 8266–8282, Jul. 2020, doi: 10.1016/j.jmrt.2020.05.098.10.1016/j.jmrt.2020.05.098 ↗
17. Effect of Si, Cu and processing parameters on Al-Si-Cu HPDC castings10.1016/j.jmatprotec.2017.06.043 ↗
18. Effect of Injection parameters and vacuum on the strength and porosity amount of die-casted A380 Alloy10.1007/s40962-016-0046-2 ↗
19. Influence of injection parameters on the porosity and tensile properties of high-pressure die cast Al-Si alloys: a review10.1007/BF03355601 ↗
20. M. R. Aboel-Fotouh, A. Shash, and Prof. Dr. Abd El-Halim El-Habak, ‘SEMI-AUTOMATED GATING SYSTEM DESIGN WITH OPTIMUM GATE AND OVERFLOW POSITIONS FOR HPDC’, 2018, doi: 10.13140/RG.2.2.18112.99843.10.1007/978-3-319-59590-0_4 ↗