High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects
Source abstract
Abstract
High-temperature fatigue properties are critical for laser powder bed fusion (LPBF) fabricated Nickel-based superalloy Hastelloy-X (HX) used in aero engines. In this study, superior high-temperature high-cycle fatigue properties of LPBF HX were achieved. The detailed investigations show that the grain boundary oxidation promoted by the different deformation modes between neighboring grains, despite the reduced oxygen-related damage in the coarser LPBF HX microstructures, are the potential causes for the inter-granular fatigue crack initiation and the subsequent crack coalescence. In the meantime, the crack propagation could be hindered by the refined carbides and annealing twins with Σ3 misorientation (60°/ 〈1 1 1〉) in LPBF HX. Furthermore, the recrystallized grains formed ahead of the crack tip due to the severe deformation within the plastic zone and high testing temperature have different crystallographic orientations, which leads to the crack propagation path changes and increases the fatigue crack propagation resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Improvement of wetting and necking of nickel-based superalloys fabricated by sequential dual-laser powder bed fusion via particle-scale computational fluid dynamics
2. Process optimization and mechanical properties of oxide dispersion strengthened nickel-based superalloy by selective laser melting10.1016/j.matdes.2019.108418 ↗
3. Strengthening mechanism of a Ni-based superalloy prepared by laser powder bed fusion: The role of cellular structure10.1016/j.matdes.2023.112396 ↗
4. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy
5. Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)10.1016/j.matdes.2019.107598 ↗
6. Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting
7. Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed
8. Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy10.1016/j.matdes.2018.08.039 ↗
9. Fatigue behaviour of L-DED processed Ti-6Al-4V with microstructures refined by trace boron addition10.1016/j.ijfatigue.2022.107454 ↗
10. Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting10.1016/j.msea.2016.04.086 ↗
11. Microstructure and hot tensile behavior of Hastelloy X superalloy laser powder-bed fusion-fabricated through different scanning patterns10.1016/j.msea.2023.144717 ↗
12. Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X10.1016/j.msea.2023.145479 ↗
13. Fatigue Life of the Repair TIG Welded Hastelloy X Superalloy10.5781/JWJ.2015.33.5.26 ↗
14. Development of a procedure for estimating the high cycle fatigue strength of some high temperature structural alloys10.1115/1.3224997 ↗
15. Effects of grain size on the high-cycle fatigue behavior of IN792 superalloy10.1016/j.matdes.2014.08.059 ↗
16. Intermediate temperature brittleness of Ni based superalloy Nimonic26310.1016/j.matchar.2018.03.013 ↗
17. Crack nucleation in glide plane decohesion and shear band separation10.1016/0956-716X(93)90038-T ↗
18. Mechanism of intermediate temperature embrittlement of ni and ni-based superalloys10.1080/10408436.2011.613492 ↗
19. Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading
20. High-temperature low-cycle fatigue tests on hastelloy x10.1080/18811248.1977.9730773 ↗
21. Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion10.1016/j.matchar.2021.110969 ↗
22. Superior tensile properties of Hastelloy X enabled by additive manufacturing10.1080/21663831.2021.1911870 ↗
23. Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energy10.1016/j.actamat.2012.02.016 ↗
24. Twin boundary: Controllable interface to fatigue cracking10.1016/j.jmst.2017.03.022 ↗
25. Difference in fatigue cracking behaviors of Cu bicrystals with the same component grains but different twin boundaries10.1016/j.scriptamat.2014.09.021 ↗
26. High-temperature high-cycle fatigue performance and machine learning-based fatigue life prediction of additively manufactured Hastelloy X10.1016/j.ijfatigue.2023.108012 ↗
27. A review on the fatigue cracking of twin boundaries: Crystallographic orientation and stacking fault energy10.1016/j.pmatsci.2022.101011 ↗
28. Controllable fatigue cracking mechanisms of copper bicrystals with a coherent twin boundary
29. Transition of low and high-angle grain boundaries during strain rate-induced dislocation storage and annihilation10.1016/j.matchar.2023.113284 ↗
30. Dependence of intergranular fatigue cracking on the interactions of persistent slip bands with grain boundaries10.1016/S1359-6454(02)00399-3 ↗
31. Intergranular crack tip oxidation in a Ni-base superalloy10.1016/j.actamat.2013.02.050 ↗
32. A numerical study on the influence of grain boundary oxides on dwell fatigue crack growth of a nickel-based superalloy10.1016/j.jmst.2021.06.045 ↗
33. Role of oxygen in enhanced fatigue cracking in a PM Ni-based superalloy: Stress assisted grain boundary oxidation or dynamic embrittlment?10.1016/j.corsci.2018.05.001 ↗
34. High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments
35. Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting
36. M23C6 precipitation behavior and grain boundary serration in Ni-based Alloy 69010.1016/j.matchar.2014.07.008 ↗
37. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni-Cr-W based superalloy10.1016/j.msea.2012.03.092 ↗
38. Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology10.1007/s00170-011-3423-2 ↗
39. On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study
40. Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism10.1016/j.msea.2018.07.008 ↗
41. High-temperature tensile behavior of diffusion-welded hastelloy X10.1007/s12206-022-0620-x ↗
42. ISO 1099: 2017(E), Metallic materials – Fatigue testing – Axial force-controlled method, 2017.
43. ASTM Standard E21, Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, ASTM B. Stand. i (2009) 1–8.
44. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
45. Revealing the Interrelation between Process Parameters and Microstructure to Promote the Mechanical Performance for Hastelloy-X
46. Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting10.1016/j.conbuildmat.2019.06.132 ↗
47. Residual stress state in an induction hardened steel bar determined by synchrotron- and neutron diffraction compared to results from lab-XRD10.1016/j.msea.2016.04.075 ↗
48. Twinning-related grain boundary engineering10.1016/j.actamat.2004.05.031 ↗
49. On the preferential grain boundary oxidation of a Ni-Co-based superalloy10.1016/j.corsci.2022.110203 ↗
50. Grain size effects in a Ni-based turbine disc alloy in the time and cycle dependent crack growth regimes10.1016/j.ijfatigue.2013.07.014 ↗
51. On the reversibility of dislocation slip during small scale low cycle fatigue10.1016/j.actamat.2015.04.029 ↗
52. Oxidation effects on the fatigue crack growth behaviour of alloy 718 at high temperature10.1016/S1359-6454(96)00192-9 ↗
53. Thermal activation of fatigue crack growth: Analysing the mechanisms of fatigue crack propagation in superalloys10.1016/j.msea.2008.02.016 ↗
54. A model for dynamic embrittlement10.1016/0956-7151(94)00387-W ↗
55. The effect of subsequent heating treatment on the microstructure and mechanical properties of additive manufactured Hastelloy X alloy10.1016/j.matchar.2022.111799 ↗
56. Investigation of microstructure and failure mechanisms at room and elevated temperature of Hastelloy X produced by laser powder-bed fusion
57. Microstructure of Carbides at Grain Boundaries in Nickel Based Superalloys10.1016/S1005-0302(12)60169-8 ↗
58. Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion10.1016/j.msea.2020.139177 ↗
59. The Structure of High-Angle Grain Boundaries10.1016/0001-6160(66)90168-4 ↗
60. Twin boundary: Stronger or weaker interface to resist fatigue cracking?10.1016/j.scriptamat.2012.01.028 ↗
61. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗