journal article·2016-11

Multiple parallel twinning overgrowth in nanostructured dense cobalt ferrite

Pietro Galizia, Carlo Baldisserri, Claudio Capiani, Carmen Galassi

Materials & Design· Volume 109
Publisher page

Abstract

Cobalt ferrite powders were synthesized by solid state reaction of the nanosized oxides at different temperatures. The highly aggregated powders were milled, and the aggregate size was reduced from 25 – 40 μm to 12–20 μm, depending on the milling time. A correlation between milling media diameter and final granulometry, and an unexpected calcination temperature effect on the milling efficiency were found. Highly homogenous green bodies and fully dense materials were produced for the first time after conventional sintering. The crystallite size depends primarily on the heating conditions and decreases from 50 – 70 nm to 27–13 nm. Under the same sintering conditions, particle morphology and crystallite size control the final grain shape, producing twinned grains with increased multiple parallel twinning overgrowth for the finer powders. The sintered cobalt ferrite ceramics show a relative density of 96–99%. The higher the planar faults density and grain size, the lower is the induced magnetization due to increased domain walls pinning. The variation of initial susceptibility was explained by extending the Globus model to the case where the domain walls are pinned at twinning boundaries. A linear correlation between multiparallel-twinned grains fraction and initial susceptibility was found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Multiferroics and related materials · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Monolayer assembly of ferrimagnetic CoxFe3–xO4 nanocubes for magnetic recording10.1021/nl500904a ↗
2. Studies on NO2 gas sensing properties of sprayed Co1−xMnxFe2O4 (0≤x≤0.5) spinel ferrite thin films10.1016/j.ceramint.2015.02.051 ↗
3. Nanoscale magnetization reversal caused by electric field-induced ion migration and redistribution in cobalt ferrite thin films10.1021/acsnano.5b00456 ↗
4. Tamilarasan, Magnetoresistance in silicon based ferrite magnetic tunnel junction10.1016/j.cap.2013.11.024 ↗
5. Synthesis, characterization and effect of precipitating agent on the antibacterial properties of cobalt ferrite nanoparticles10.1080/0371750X.2015.1011791 ↗
6. An overview of the structure and magnetism of spinel ferrite nanoparticles and their synthesis in microemulsions10.1016/j.cej.2006.11.001 ↗
7. Preparation and properties of the CoFe2O4–Nb–Pb(Zr,Ti)O3 multiferroic composites prepared in situ by gel-combustion method10.1016/j.jallcom.2009.05.101 ↗
8. The influence of cobalt population on the structural properties of CoxFe3−xO4
9. Magnetoelectric ceramic composites with double-resonant permittivity and permeability in GHz range: a route towards isotropic metamaterials
10. Synthesis of highly stable CoFe2O4 nanoparticles and their use as magnetically separable catalyst for Knoevenagel reaction in aqueous medium10.1016/j.molcata.2011.02.007 ↗
11. Effect of conditions of the mechanochemical synthesis and heat treatment on the phase composition, structural parameters, and magnetic properties of nanodimensional powders of cobalt spinel ferrite10.3103/S1067821212050100 ↗
12. Oleate-based hydrothermal preparation of CoFe2O4 nanoparticles, and their magnetic properties with respect to particle size and surface coating10.1016/j.jmmm.2015.04.090 ↗
13. Efficient magnetic CoFe2O4 nanocrystal catalyst for aerobic oxidation of cyclohexane prepared by sol–gel auto-combustion method: effects of catalyst preparation parameters10.1007/s10971-013-3031-8 ↗
14. Twinning and epitaxial growth of taaffeite-type modulated structures in BeO-doped MgAl2O410.1039/c3ce26997c ↗
15. Effect of calcination temperature on the structural and electrical properties of cobalt ferrite synthesized by combustion method10.1016/j.jallcom.2010.10.073 ↗
16. Preparation and characterization of cobalt ferrite by the polymerized complex method10.1016/j.matlet.2004.12.004 ↗
17. Enhancing the strain sensitivity of CoFe2O4 at low magnetic fields without affecting the magnetostriction coefficient by substitution of small amounts of Mg for Fe10.1039/C6CP00369A ↗
18. Influence of Zr doping on the structural, magnetic and magnetoelastic properties of cobalt-ferrites10.1016/j.jallcom.2015.02.084 ↗
19. Magnetostriction properties of oriented polycrystalline CoFe2O410.1016/j.jmmm.2015.10.073 ↗
20. Evidence of domain wall pinning in aluminum substituted cobalt ferrites10.1016/j.jmmm.2016.03.074 ↗
21. Measurement of the sortable silt current speed proxy using the Sedigraph 5100 and Coulter Multisizer IIe: precision and accuracy10.1046/j.1365-3091.1999.00256.x ↗
22. SediGraph Technique
23. 40Years of presentation particle size distributions-yet still incorrect?10.1002/1521-4117(200102)18:1<22::AID-PPSC22>3.0.CO;2-2 ↗
24. Bestimmung der Größe und der inneren Struktur von Kolloidteilchen mittels Röntg
25. Determining the magnetic properties of 1kg mass standards10.6028/jres.100.015 ↗
26. Theory of Rayleigh's law of magnetization
27. Low-field variation of magnetic susceptibility and its effect on the anistotropy of magnetic susceptibility of rocks10.1046/j.1365-246X.2002.01731.x ↗
28. Particle size distribution measurement from millimeters to nanometers and from rods to platelets10.1081/DIS-120015368 ↗
29. Topotaxial reactions during the genesis of oriented rutile/hematite intergrowths from Mwinilunga (Zambia)
30. Macroscopic models of magnetization10.1109/20.825802 ↗
31. Accurate quantitative analysis of clay and other minerals in sandstones by XRD: comparison of a Rietveld and a reference intensity ratio (RIR) method and the importance of sample preparation10.1180/000985500546666 ↗
32. CoFe2O4 magnetic ceramic derived from gel and densified by spark plasma sintering10.1016/j.jallcom.2015.09.271 ↗
33. Spinel cobalt ferrite by complexometric synthesis10.1016/j.jmmm.2005.01.011 ↗
34. Applications of grinding kinetics analysis to fine grinding characteristics of some inorganic materials using a composite grinding media by planetary ball mill10.1016/S0032-5910(00)00341-7 ↗
35. Material properties in fine grinding10.1016/j.minpro.2004.08.006 ↗
36. Sintering behaviour of cobalt ferrite ceramic10.1016/j.ceramint.2006.07.012 ↗
37. Toughening by nano-scaled twin boundaries in nanocrystals10.1088/0965-0393/18/6/065002 ↗
38. Permeability measurements in cobalt ferrite and carbonyl iron powders and suspensions10.1016/S0304-8853(02)00484-5 ↗
39. Nanogrowth twins and abnormal magnetic behavior in CoFe2O4 epitaxial thin films10.1063/1.3033371 ↗
40. Determination of initial magnetization curve from crystallites size and effective anisotropy field10.1109/TMAG.1971.1067200 ↗
41. Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical route10.1016/j.jmmm.2006.06.003 ↗
42. Defects/strain influenced magnetic properties and inverse of surface spin canting effect in single domain CoFe2O4 nanoparticles10.1016/j.apsusc.2015.12.205 ↗
43. Dionne · 2009
44. Structural, morphological, optical and magnetic properties of Al-doped CoFe2O4 nanoparticles prepared by Sol–Gel auto-combustion method10.1007/s10948-016-3423-4 ↗
45. Impacts of Tb substitution at cobalt site on structural, morphological and magnetic properties of cobalt ferrites synthesized via double sintering method10.1016/j.ceramint.2014.10.033 ↗
46. Low temperature stabilization of nanoscale epitaxial spinel ferrite thin films by atomic Layer deposition10.1002/adfm.201400517 ↗
47. Magnetic memory effect in self-assembled nickel ferrite nanoparticles having mesoscopic void spaces10.1039/C6RA05483H ↗
48. Spin transport and temperature-dependent giant positive junction magnetoresistance in CoFe2O4/SiO2/p-Si heterostructure10.1007/s00339-015-9521-5 ↗