Thermal conductivity of low-density micro-and nanocellular poly(methyl-methacrylate) (PMMA): Experimental and modeling
Source abstract
Abstract
Nowadays, finding new materials with enhanced thermal insulation properties has become a mandatory task to reduce energy consumption and CO2 emissions. In recent years, nanocellular polymers have aroused great attention due to their very interesting combination of properties, which include reduced conduction through the gas phase thanks to the Knudsen effect. There are plenty of theoretical works hypothesizing the thermal insulation performance of nanocellular polymers. However, there is a lack of experimental results, especially at low densities. In the present work, the thermal conductivity of low-density microcellular and nanocellular poly(methyl-methacrylate) (PMMA) was measured to evaluate the different heat transfer mechanisms acting on these structures. PMMA foamed sheets with relative densities ranging from 0.09 to 0.18 and cell sizes between 400–4000 nm were produced by gas dissolution foaming using CO2 as a physical blowing agent. Samples were measured at various temperatures, resulting in thermal conductivities between 37.4 and 46.6 mW/(m·K) at 10 °C. Experimental results have been analyzed to build a semi-empirical model able to predict the thermal conductivity and each heat transfer mechanism contribution. To do this, a novel method to determine the solid structure factor from the slope of the thermal conductivity versus the temperature curve is introduced.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Phase Equilibria and Thermodynamics · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. International Energy Agency. Transition to Sustainable Buildings. Strategies and Opportunities to 2050, (2013).
2. M. Casini, Smart Buildings. Advanced Materials and Nanotechnology to Improve Energy-Efficiency and Environmental Performance, 2016th ed., Woodhead Publishing, n.d.
3. European Commission – Department: Energy – In focus. Energy efficiency in buildings, (2020).
4. Directive 2010/31/EU of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings, (n.d.).
5. Directive 2012/27/EU of the European Parliament and of the Council of 25 October 2012 on energy efficiency, amending Directives 2009/125/EC and 2010/30/EU and repealing Directives 2004/8/EC and 2006/32/EC, (n.d.).
6. The economics of thermal superinsulation in buildings10.1016/j.enbuild.2021.111506 ↗
7. A review and evaluation of thermal insulation materials and methods for thermal energy storage systems10.1016/j.rser.2018.12.040 ↗
8. Experimental validation of the Knudsen effect in nanocellular polymeric foams10.1016/j.polymer.2014.10.006 ↗
9. Nanoporous polymeric materials: A new class of materials with enhanced properties10.1016/j.pmatsci.2016.02.002 ↗
10. Mechanical properties of microcellular and nanocellular silicone rubber foams obtained by supercritical carbon dioxide10.1038/s41428-019-0175-6 ↗
11. Key Production Parameters to Obtain Transparent Nanocellular PMMA10.1002/mame.201700343 ↗
12. Nanoporous Materials - An Overview
13. CO2-Blown nanocellular foams10.1002/app.41293 ↗
14. Nanocellular polymer foams as promising high performance thermal insulation materials10.1016/j.eurpolymj.2015.01.039 ↗
15. Polymer nano-foams for insulating applications prepared from CO2 foaming10.1016/j.progpolymsci.2014.07.001 ↗
16. Nanocellular Polymers: The Challenge of Creating Cells in the Nanoscale10.3390/ma12050797 ↗
17. Overcoming the Challenge of Producing Large and Flat Nanocellular Polymers: A Study with PMMA10.1002/adem.201900148 ↗
18. Thermal conductivity of micro/nano-porous polymers: Prediction models and applications10.1007/s11467-021-1107-4 ↗
19. Modelling of thermal transport through a nanocellular polymer foam: Toward the generation of a new superinsulating material10.1039/C7NR00327G ↗
20. On the interaction of infrared radiation and nanocellular polymers: First experimental determination of the extinction coefficient10.1016/j.colsurfa.2020.124937 ↗
21. Wrong expectation of superinsulation behavior from largely-expanded nanocellular foams10.1039/D0NR01927E ↗
22. Gibson · 1997
23. Thermal Conductivity of Open-Cell Polyolefin Foams10.1002/polb.21358 ↗
24. Thermal properties of organic and inorganic aerogels10.1557/JMR.1994.0731 ↗
25. Correlation between structure and thermal conductivity of organic aerogels10.1016/0022-3093(95)00191-3 ↗
26. Influence of Solid Phase Conductivity and Cellular Structure on the Heat Transfer Mechanisms of Cellular Materials: Diverse Case Studies10.1002/adem.200900138 ↗
27. Prediction of the radiation term in the thermal conductivity of crosslinked closed cell polyolefin foams10.1002/(SICI)1099-0488(20000401)38:7<993::AID-POLB10>3.0.CO;2-J ↗
28. N.C. Hilyard, A. Cunningham, Low density cellular plastics Physical basis of behaviour, 1994. https://doi.org/10.1007/978-94-011-1256-7.10.1007/978-94-011-1256-7 ↗
29. Modeling the heat transfer by conduction of nanocellular polymers with bimodal cellular structures10.1016/j.polymer.2018.11.047 ↗
30. Thermal properties of silica aerogels between 1.4 and 330 K10.1016/S0022-3093(05)80455-7 ↗
31. Thermal Properties of Aerogels, in10.1007/978-1-4419-7589-8_23 ↗
32. Thermal Properties Of Silica Aerogels, Le10.1051/jphyscol:1989414 ↗
33. J. Fricke, Aerogels, in: Springer Proc. Phys. 6, 1985.10.1007/978-3-642-93313-4 ↗
34. J. Fricke, Thermal Transport in Porous Superinsulations, (1986) 94–103. https://doi.org/10.1007/978-3-642-93313-4_11.10.1007/978-3-642-93313-4_11 ↗
35. A theoretical and numerical study on the gas-contributed thermal conductivity in aerogel10.1016/j.ijheatmasstransfer.2017.01.051 ↗
36. Thermal gap conductance of conforming surfaces in contact10.1115/1.2910719 ↗
37. Advances of thermal conductivity models of nanoscale silica aerogel insulation material10.1016/j.applthermaleng.2015.02.013 ↗
38. Methodical selection of thermal conductivity models for porous silica-based media with variation of gas type and pressure10.1016/j.ijheatmasstransfer.2022.122519 ↗
39. J. Nassios, Kinetic theory of rarefied gas flows with modern applications, Austms.Org.Au. (2006). https://www.austms.org.au/Publ/Gazette/2013/Mar13/Nassios.pdf.
40. Carbon Dioxide Separation through Polymeric Membrane Systems for Flue Gas Applications, Recent Patents
41. Siegel · 1992
42. Extinction coefficient of polyolefin foams10.1002/polb.20435 ↗
43. Radiation heat transfer in foam insulation10.1016/0017-9310(87)90071-8 ↗
44. Transparent nanocellular PMMA: Characterization and modeling of the optical properties10.1016/j.polymer.2019.03.010 ↗
45. An experiment to measure Mie and Rayleigh total scattering cross sections10.1119/1.1466815 ↗
46. Transparent thermal insulation silica aerogels10.1039/D0NA00655F ↗
47. Transparent Polyisocyanurate-Polyurethane-Based Aerogels: Key Aspects on the Synthesis and Their Porous Structures10.1021/acsapm.1c00712 ↗
48. Radiation-conduction interaction : An investigation on silica aerogels10.1016/0017-9310(95)00313-4 ↗
49. F. Almeida, H. Beyrichen, N. Dodamani, R. Caps, A. Muller, R. Oberhoffer, Thermal conductivity analysis of a new sub-micron sized polystyrene foam, (2020). https://doi.org/10.1177/0021955X20943101.10.1177/0021955X20943101 ↗
50. A passive guard for low thermal conductivity measurement of small samples by the hot plate method10.1088/1361-6501/28/1/015008 ↗
51. Production of PMMA-based nanocellular polymers using low demanding saturation conditions10.1016/j.matlet.2019.126551 ↗
52. Effect of the molecular structure of TPU on the cellular structure of nanocellular polymers based on PMMA/TPU blends10.3390/polym13183055 ↗
53. A process for making microcellular thermoplastic parts10.1002/pen.760302010 ↗
54. Characterization of the cellular structure based on user-interactive image analysis procedures10.1177/0021955X13503847 ↗
55. V. Kumar, Process synthesis for manufacturing microcellular thermoplastic parts, Massachusetts Inst. Technol. (1988).
56. ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, (2017).
57. ISO 8301 Thermal insulation - Determination of steady-state thermal resistance and related properties - Heat flow meter, (1991).
58. Y.A. Cengel, A.J. Ghajar, Heat and Mass Transfer: Fundamentals & Applications, Fifth Edit, Mc Graw Hill Education, 2006.
59. Review: An assessment of expressions for the apparent thermal conductivity of cellular materials10.1007/BF00363413 ↗
60. Production, cellular structure and thermal conductivity of microcellular (methyl methacrylate)-(butyl acrylate)-(methyl methacrylate) triblock copolymers10.1002/pi.2931 ↗