journal article·2016-04

Tribological, electrochemical and in vitro biocompatibility properties of SiC reinforced composite coatings

Mitun Das, Vamsi Krishna Balla, T.S. Sampath Kumar, Amit Bandyopadhyay, Indranil Manna

Materials & Design· Volume 95
Publisher page

Abstract

Abstract In this work, laser engineered net shaping (LENS™) technique was used to create SiC reinforced titanium matrix composite (TMC) on titanium surface. These composite coatings developed by injecting SiC powder into titanium melt pool, created using a high-power laser. The laser parameters strongly influenced the dissolution of SiC particles leading to formation of TiSi 2 , Ti 5 Si 3 , and TiC phases along with residual SiC in the composite layers. A graded microstructure, with high concentration of secondary phases on top compared to the bottom region was formed. The reinforcing ceramic phases in the TMC coatings enhanced the wear resistance of titanium by about 100 times. The wear resistance of the composite coatings in physiological environment found to increase with increase in the laser power and concentration of SiC particles injected into the melt pool. These composite coatings also showed better corrosion resistance than Ti. In vitro biocompatibility studies performed using osteoblast (MG63) and fibroblast cells (NIH3T3) demonstrated non-toxic nature of these composite coatings. It is envisioned that such coatings may find applications in articulating surfaces of load-bearing implants to enhance their in vivo lifetime with reduced metal ion release.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Tribological properties of titanium alloys10.1016/0043-1648(91)90249-T ↗
2. Clinical experiences with a titanium alloy total hip prosthesis: a posterior approach
3. In situ synthesized TiB–TiN reinforced Ti6Al4V alloy composite coatings: microstructure, tribological and in-vitro biocompatibility10.1016/j.jmbbm.2013.09.006 ↗
4. CoCrMo metal-on-metal hip replacements10.1039/C2CP42968C ↗
5. Dose-dependent cytotoxicity of clinically relevant cobalt nanoparticles and ions on macrophages in vitro10.1088/1748-6041/4/2/025018 ↗
6. Inflammatory pseudotumor associated with femoral nerve palsy following metal-on-metal resurfacing of the hip10.2106/JBJS.G.00879 ↗
7. What's next? Alternative materials for articulation in total joint replacement10.1016/j.actbio.2012.03.029 ↗
8. Technical and histologic analysis of a retrieved carbon fiber-reinforced poly-ether-ether-ketone composite alumina-bearing liner 28months after implantation10.1016/j.arth.2006.07.012 ↗
9. Laser-assisted Zr/ZrO2 coating on Ti for load-bearing implants10.1016/j.actbio.2009.03.032 ↗
10. The in-vivo wear performance of prosthetic femoral heads with titanium nitride coating10.1016/S0142-9612(99)00246-X ↗
11. A comparative study of titanium nitrides, TiN, TiNbN and TiCN, as coatings for biomedical applications10.1016/j.surfcoat.2009.06.010 ↗
12. (Zr,Ti)CN coatings as potential candidates for biomedical applications10.1016/j.surfcoat.2011.03.074 ↗
13. Improving bearing surfaces of artificial joints10.1002/1527-2648(200103)3:3<135::AID-ADEM135>3.0.CO;2-B ↗
14. Laser processing of SiC particle reinforced coating on titanium10.1016/j.scriptamat.2010.04.044 ↗
15. Reaction layer around SiC particles in Ti: an electron microscopy study10.1016/S1359-6454(99)00151-2 ↗
16. Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium10.1016/j.surfcoat.2011.03.027 ↗
17. Ti–6Al–4V strengthened by laser melt injection of WC particles10.1016/S1359-6454(02)00366-X ↗
18. Research status of laser cladding on titanium and its alloys: a review10.1016/j.matdes.2014.01.077 ↗
19. In situ nitridation of titanium–molybdenum alloys during laser deposition10.1007/s10853-012-6656-z ↗
20. Metal matrix composites10.1146/annurev-matsci-070909-104511 ↗
21. Biocompatibility of silicon carbide in colony formation test in vitro: a promising new ceramic THR implant coating material10.1007/s004020050319 ↗
22. Micro/nanoscale mechanical and tribological characterization of SiC for orthopedic applications10.1002/jbm.b.30168 ↗
23. Clinical outcomes of silicon carbide coated stents in patients with coronary artery disease
24. Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counter faces10.1016/j.wear.2004.09.062 ↗
25. Tribological properties of titanium alloys10.1016/0043-1648(91)90249-T ↗
26. Sliding wear resistance of metal matrix composite layers prepared by high power laser10.1016/j.surfcoat.2004.09.003 ↗
27. Formation of tribochemical layer of ceramics sliding in water and its role for low friction10.1016/S0043-1648(00)00466-X ↗
28. Friction and wear properties of CrN coatings sliding against Si3N4 balls in water and air10.1016/j.wear.2008.02.010 ↗
29. Friction and wear properties of duplex MAO/CrN coatings sliding against Si3N4 ceramic balls in air, water and oil10.1016/j.wear.2009.06.009 ↗
30. Tribological properties of silicon carbide under water-lubricated sliding10.1016/S0043-1648(98)00217-8 ↗
31. Preparation of brushite powders and their in vitro conversion to nanoapatites
32. Mansfeld · 1976 · 163
33. The cytotoxicity evaluation of Kevlar and silicon carbide by MTT assay10.1007/BF00058980 ↗
34. Cytocompatibility of bio-inspired silicon carbide ceramics10.1002/jbm.b.31700 ↗
35. Surface characteristic and cell response of CVD SiC coating for carbon/carbon composites used for hip arthroplasty10.1002/sia.5021 ↗
36. Cytocompatibility of two coating materials, amorphous alumina and silicon carbide, using human differentiated cell cultures10.1016/0142-9612(91)90118-T ↗