An accelerated creep assessment method based on inelastic strain partitioning and slow strain rate testing
Source abstract
Abstract
A new accelerated creep assessment method to evaluate the creep performance of metals and alloys from high-temperature tensile tests, i.e. slow-strain-rate testing (SSRT), is proposed and evaluated. The method consists of decomposing the inelastic strain into a plastic and creep component by adopting general assumptions on the inelastic strain behaviour of materials, formulated using a state variable formalism and verified by tensile tests with intermediate dwell times at constant stress. Either, the plastic and creep strain components are considered non-interacting and additive, as observed in the stainless steel AISI 316L at 600 °C. Or, as in the case of the ductile cast iron EN-GJS-SiMo5-1 at 500 °C and the nickel-base superalloy Hastelloy X at 800 °C, the components are considered unified, meaning that the effect of inelastic straining is the same irrespective of whether it is caused through creep at constant stress or by plastic deformation due to an instantaneous stress increase. Based on these assumptions, the proposed method is used to assess the creep strain from SSRT in good agreement with conventional creep test results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Creep Rupture of Structures
2. Creep-fatigue failure of an aero engine turbine blades10.1016/S1350-6307(01)00011-5 ↗
3. Creep cavitation in metals10.1016/S0749-6419(02)00111-0 ↗
4. A study of the creep behavior of modified 9Cr-1Mo steel using continuum-damage modeling10.1016/j.ijplas.2012.04.004 ↗
5. Thermomechanical design in the automotive industry10.1111/j.1460-2695.2004.00746.x ↗
6. High Temperature Materials for Heavy Duty Diesel Engines: Historical and Future Trends
7. Lifing methods and safety criteria in aero gas turbines10.1016/j.engfailanal.2005.08.010 ↗
8. Impact of operating conditions and design parameters on gas turbine hot section creep life
9. Progress in Creep-Resistant Steels for High Efficiency Coal-Fired Power Plants10.1115/1.4032372 ↗
10. Challenges for Gas Turbine Engine Components in Power Generation10.1016/j.prostr.2017.11.057 ↗
11. ISO, Metallic materials - Uniaxial creep testing in tension - Method of test, 2009.
12. High temperature creep resistance of austenitic heat-resisting steels10.1016/0921-5093(91)90282-R ↗
13. Creep-resistant, Al2O3-forming austenitic stainless steels10.1126/science.1137711 ↗
14. Application of the Monkman-Grant law to the creep fracture of nodular cast irons with various matrix compositions and structures10.1016/j.msea.2009.04.020 ↗
15. Monotonic and Cyclic Creep of Cast Materials for Exhaust Manifolds10.4271/05-12-02-0012 ↗
16. Design of a creep resistant nickel base superalloy for power plant applications: Part 3 - Experimental results10.1179/026708303225009805 ↗
17. Properties, processability and weldability of a novel affordable creep resistant nickel base superalloy10.1179/174328408X295999 ↗
18. O.M. Horst, D. Adler, P. Git, H. Wang, J. Streitberger, M. Holtkamp, N. Jöns, R.F. Singer, C. Körner, G. Eggeler, Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure, Mater. Des. 195(January 2019) (2020).10.1016/j.matdes.2020.108976 ↗
19. Current development of creep-resistant magnesium cast alloys: A review10.1016/j.matdes.2018.06.032 ↗
20. A time-temperature relationship for rupture and creep stresses
21. S.S. Manson, A.M. Haferd, A linear time-temperature relation for extrapolation of creep and stress-rupture data, Tech. rep. (1953).
22. Statistical scatter and variability of creep property estimates in θprojection method10.1179/mst.1989.5.7.699 ↗
23. The θprojection method and low creep ductility materials10.1179/026708300773002609 ↗
24. Test methods for accelerated development, design and life assessment of high-temperature materials10.1016/0261-3069(93)90077-9 ↗
25. An Accelerated Method for Creep Prediction From Short Term Stress Relaxation Tests10.1115/1.4032109 ↗
26. Laws for Work-Hardening and Low-Temperature Creep10.1115/1.3443340 ↗
27. D.C. Stouffer, L. Papernik, H.L. Bernstein, An Experimental Evaluation of the Mechanical Response Characteristics of Rene 95, AFWAL-TR-80-4136, Tech. rep., Materials laboratory, University of Cincinnati, Cincinnati, Ohio (1980).
28. Determination of rupture time and strain rate in creep by means of the uniaxial tensile test10.1016/0924-0136(95)02172-8 ↗
29. Y. Xuexing, R. Sandstrom, Study of creep behaviour in P-doped copper with slow strain rate tensile tests, Tech. rep. (2000).
30. Note on the determination of relaxation and creep data from ramp tests10.1023/A:1009827622426 ↗
31. Equivalence between hot tensile and creep testing data for Kanthal A1 alloy10.1590/S0370-44672011000200008 ↗
32. D.J. Inforzato, G.F. Batalha, E.F. Prados, L. d. O. Bueno, Equivalence Between Hot Tensile and Creep Data in Aluminum Alloy Al7475-T7351. Part 1: Relations Involving Stress, Strain Rate and Temperature, in: 69th ABM International Annual Congress, São Paulo, 2014, pp. 8310–8322.10.5151/1516-392X-24905 ↗
33. Fatigue design of structures under thermomechanical loadings10.1046/j.1460-2695.2002.00612.x ↗
34. Thermomechanical Fatigue of Ductile Cast Iron and Its Life Prediction10.1007/s11661-015-2873-9 ↗
35. Creep and plastic strains of 304 stainless steel at 593C under step stress changes, considering aging10.1115/1.3162084 ↗
36. Study of a modified non-unified model for time-dependent behavior of metal materials10.1016/j.mechmat.2017.07.017 ↗
37. New flow rules in elasto-viscoplastic constitutive models for spheroidal graphite cast-iron10.1016/j.ijplas.2009.11.007 ↗
38. Constitutive modeling for uniaxial time-dependent ratcheting of SS304 stainless steel10.1016/j.mechmat.2006.08.004 ↗
39. A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations. Part I: Evaluation and determination of material parameters10.1016/j.mechmat.2006.01.005 ↗
40. A unified constitutive law for cyclic viscoplasticity10.1016/j.ijsolstr.2008.10.005 ↗
41. A constitutive model for rate dependent and rate independent inelasticity. Application to IN71810.1016/j.ijplas.2010.08.005 ↗
42. Thermodynamic Theory of Viscoplasticity10.1016/S0065-2156(08)70345-4 ↗
43. On the structure of the rate equations of materials with internal variables10.1007/BF01260883 ↗
44. On the plastic and viscoplastic constitutive equations-part I: Rules developed with internal variable concept10.1115/1.3264257 ↗
45. A viscoplastic theory with thermodynamic considerations10.1007/BF01177406 ↗
46. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
47. A state variable interpretation of some rate-dependent inelastic properties of steel10.1115/1.3443510 ↗
48. Effect of creep prestrain on subsequent plastic deformation10.1016/0749-6419(85)90019-1 ↗
49. Effects of Cyclic Plasticity on Subsequent Creep for Type 316 Stainless Steel at Elevated Temperature10.1115/1.3225844 ↗
50. Strain hardening during low temperature creep of 304 stainless steel10.1016/0001-6160(87)90261-6 ↗
51. Viscoplasticity with creep and plasticity bounds10.1016/0749-6419(93)90030-T ↗
52. M. Rieth, A. Falkenstein, P. Graf, S. Heger, U. Jäntsch, M. Klimiankou, E. Materna-Morris, H. Zimmermann, Creep of the austenitic steel AISI 316 L (N) – Experiments and Models. FZKA 7065, Tech. rep., Forschungszentrum Karlsruhe in der Helmholtz-Gemeinschaft, Karlsruhe (2004).
53. High-temperature corrosion behaviour of metal alloys in commercial molten salts10.1016/j.solener.2020.03.010 ↗
54. Effect of temperature on microparticle rebound characteristics at constant impact velocity - Part II
55. High-temperature mechanical- and fatigue properties of cast alloys intended for use in exhaust manifolds10.1016/j.msea.2014.08.014 ↗
56. ISO, Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (2011).
57. ISO, Metallic materials – Tensile testing – Part 1: Method of test at room temperature (2016).
58. Deformation behaviour in advanced heat resistant materials during slow strain rate testing at elevated temperature10.1063/2.1404104 ↗
59. ISO, Corrosion of metals and alloys – Stress corrosion testing – Part 7: Method for slow strain rate testing (2005).
60. ASTM, Standard test methods for stress relaxation for materials and structures (2008).
61. J.H. Laflen, C.E. Jaske, Cyclic Relaxation Response Under Creep-Fatigue Conditions, Stress Relaxation Testing. ASTM International (1979).10.1520/STP37424S ↗
62. Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology10.1179/026708304225022304 ↗
63. The stress relaxation and creep behaviour of a manganese-stabilized austenitic stainless steel10.1243/03093247JSA476 ↗
64. Comparison of stress relaxation and creep strain rates for the superalloy IN738LC10.1177/030932471004500805 ↗
65. Prediction of creep properties for two nickel-base superalloys from stress relaxation testing10.1177/0309324711407707 ↗
66. Critical analysis of the prediction of stress relaxation from forward creep of Type 316H austenitic stainless steel10.1016/j.matdes.2016.01.118 ↗
67. ASTM, Standard Test Method for Measurement of Fatigue Crack Growth Rates (2014).
68. Characterization of Austenitic Stainless Steels Deformed at Elevated Temperature10.1007/s11661-017-4212-9 ↗
69. Macroscopic and microscopic characterizations of Portevin-LeChatelier effect in austenitic stainless steel using high-temperature digital image correlation analysis10.1016/j.actamat.2020.116560 ↗
70. Stress response and microstructural evolution of nickel-based superalloys during low cycle fatigue: Physics-based modelling of cyclic hardening and softening10.1016/j.ijplas.2020.102682 ↗
71. A. Malekan, M. Farvizi, S.E. Mirsalehi, N. Saito, K. Nakashima, Holding time influence on creep behavior of transient liquid phase bonded joints of Hastelloy X, Mater. Sci. Eng. A 772(August 2019) (2020) 138694.10.1016/j.msea.2019.138694 ↗
72. Creep 316 Stainless10.1016/0001-6160(78)90142-6 ↗
73. Phase precipitation and time-temperature-transformation diagram of Hastelloy X10.1016/S0921-5093(00)01049-2 ↗
74. Precipitation in AISI 316L(N) during creep tests at 550 and 600 C up to 10 years10.1016/j.jnucmat.2006.12.027 ↗
75. A study of the 500 to 900C tensile deformation behaviour of spheroidal graphite cast iro10.1080/09534962.1996.11819210 ↗
76. Forming behavior and workability of Hastelloy X superalloy during hot deformation10.1016/j.msea.2007.11.059 ↗
77. Work hardening and recovery in creep
78. Development of a theoretical equation for steady-state dislocation creep and comparison with data10.1016/0001-6160(74)90089-3 ↗