journal article·2015-10

Theoretical and empirical coupled modeling on the surface roughness in diamond turning

C.L. He, W.J. Zong, Z.M. Cao, T. Sun

Materials & Design· Volume 82
Publisher page

Abstract

Abstract In this work, a theoretical and empirical coupled method is proposed to predict the surface roughness achieved by single point diamond turning, in which the surface roughness is considered to be composed of the certain and uncertain parts. The certain components are directly formulated in theory, such as the effects of the kinematics and minimum undeformed chip thickness. The uncertain components in relation to the material spring back, plastic side flow, micro defects on the cutting edge of diamond tool, and others, are empirically predicted by a RBF (radial basis function) neural network, which is established by referring to the experimental data. Finally, the particle swarm optimization algorithm is employed to find the optimal cutting parameters for the best surface roughness. The validation experiments show that the optimization is satisfied, and the prediction accuracy is high enough, i.e. that the prediction error is only 0.59–10.11%, which indicates that the novel surface roughness prediction method proposed in this work is effective.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Ultra-precision metal cutting – the past, the present and the future10.1016/S0007-8506(07)61134-2 ↗
2. Light scattering from manufactured surfaces10.1016/S0007-8506(07)60168-1 ↗
3. P.H. Brammertz, Reasons for shape and dimension errors at finished parts (Ursachen fur formund massfehler an feinbearbeiten werkstuchken), Dissertation, T.H., Aachen, 1961.
4. A revised model for predicting surface roughness in turning10.1016/0043-1648(95)06825-2 ↗
5. Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision machining10.1016/S0924-0136(96)02429-6 ↗
6. Influence of study vibration with small amplitude upon surface roughness in diamond machining10.1016/S0007-8506(07)61812-5 ↗
7. A theoretical and experimental investigation of surface roughness formation in ultra-precision diamond turning10.1016/S0890-6955(99)00103-0 ↗
8. Characterization and nanosurface generation in single point diamond turning10.1016/S0890-6955(00)00102-4 ↗
9. Analysis of surface generation in turning operation and its application10.1016/S0007-8506(07)61814-9 ↗
10. Conversation law of surface roughness in single point diamond turning10.1016/j.ijmachtools.2014.04.006 ↗
11. Development of empirical models for surface roughness prediction in finish turning10.1007/s001700200162 ↗
12. A fuzzy logic predictive model for better surface roughness of Ti–TiN coating on AL7075-T6 alloy for longer fretting fatigue life10.1016/j.measurement.2013.11.042 ↗
13. Artificial neural network modeling for surface roughness prediction in cylindrical grinding of Al–SiCp metal matrix composites and ANOVA analysis10.14743/apem2014.2.176 ↗
14. Prediction of surface roughness of turned surfaces using neural networks10.1007/s00170-004-2429-4 ↗
15. Prediction of surface roughness during hard turning of AISI 4340 steel (69 HRC)10.1016/j.asoc.2015.01.059 ↗
16. A genetic algorithmic approach for optimization of surface roughness prediction model in dry milling10.1081/MST-200051263 ↗
17. Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling10.1007/s00170-004-2110-y ↗
18. Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining10.1016/j.jclepro.2014.07.073 ↗
19. Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning10.1016/j.matdes.2006.01.008 ↗
20. Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling10.1007/s00170-006-0811-0 ↗
21. The basic issues in design and fabrication of diamond cutting tools for ultra-precision and nanometric machining10.1016/j.ijmachtools.2009.10.015 ↗
22. Diamond tool wear when machining Al6061 and 1215 steel10.1016/j.wear.2010.02.019 ↗
23. XPS analysis of the groove wearing marks on flank face of diamond tool in nanometric cutting of silicon wafer10.1016/j.ijmachtools.2008.06.008 ↗