Mechanical behaviour of composite structures made of topologically interlocking concrete bricks with soft interfaces
Source abstract
Abstract
In this study, the mechanical responses of an assembly plate made of topologically interlocking concrete bricks with rubber as soft interfaces are investigated. The principle of topological interlocking is combined with the concept of hybrid material design. A series of quasi-static tests are conducted to compare the mechanical behaviour of the hybrid interlocking assembly plate with those obtained from the monolithic plate and the interlocking assembly plate without soft interfaces. The results show that the hybrid assembly plate has a remarkable flexural compliance with less damage in the bricks compared to the other two. The effect of lateral confining load on the structural behaviour of the hybrid interlocking assembly plate is also investigated. In addition, a 3D numerical model is established to predict the overall behaviour, failure mode and the damage distributions of the hybrid assembly plate. Then the hybrid assembly plate under various lateral confining loads and with different friction factors between rubber and bricks is studied numerically. It is found that, although the maximum transverse force is influenced by the initial confining load and the friction factor, the mechanical behaviour of the hybrid structure is consistent in large deformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Masonry and Concrete Structural Analysis · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Designing architectured materials10.1016/j.scriptamat.2012.04.033 ↗
2. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
3. Sandwich panels with a core segmented into topologically interlocked elements10.1002/adem.201300002 ↗
4. An example of multimaterials design10.1002/1527-2648(20020605)4:6<371::AID-ADEM371>3.0.CO;2-R ↗
5. Sandwich materials for wind turbine blades—present and future10.1177/1099636208099710 ↗
6. Indentation behaviour of interlocked structures made of ice: influence of the friction coefficient10.1002/adem.200700111 ↗
7. Enhancement of sound absorption properties using topologically interlocked elements10.1016/j.scriptamat.2011.12.022 ↗
8. Enhanced mechanical performance of bio-inspired hybrid structures utilising topological interlocking geometry10.1038/srep26706 ↗
9. Toughening by fragmentation—how topology helps10.1002/1527-2648(200111)3:11<885::AID-ADEM885>3.0.CO;2-P ↗
10. Fracture resistant structures based on topological interlocking with non-planar contacts10.1002/adem.200390016 ↗
11. Negative stiffness of a layer with topologically interlocked elements10.1016/j.scriptamat.2003.09.053 ↗
12. Impact behaviour of plate-like assemblies made of new and existing interlocking bricks: a comparative study10.1016/j.ijimpeng.2018.02.008 ↗
13. The impact behaviour of plate-like assemblies made of new interlocking bricks: an experimental study10.1016/j.matdes.2017.08.056 ↗
14. Carving 3D architectures within glass: exploring new strategies to transform the mechanics and performance of materials10.1016/j.eml.2016.02.016 ↗
15. Experiments and numerical simulations of interlocked materials
16. Orthogonal crack approaching an interface10.1016/j.engfracmech.2009.08.009 ↗
17. Heyman · 1997
18. Integrity and fracture of plate-like assemblies of topologically interlocked elements
19. Charakterisierung und simulation topologisch verzahnter Strukturen
20. Design of a new type of interlocking brick and evaluation of its dynamic performance
21. Effect of interlocking structure on mechanical properties of bio-inspired nacreous composites10.1016/j.compstruct.2019.111260 ↗
22. Ballistic performance of bioinspired nacre-like aluminium composite plates10.1016/j.compositesb.2019.107382 ↗
23. Nonlinear finite element analysis of frp-strengthened reinforced concrete panels under blast loads10.1142/S0219876216410024 ↗
24. Modelling the response of reinforced concrete panels under blast loading10.1016/j.matdes.2013.11.069 ↗
25. User's manual and documentation for release III of the K&C concrete material model in LS-DYNA
26. Serway R, Beichner RJ. Physics for Scientists and Engineers with Modern Physics. 5th edition. New York: Saunders, 133.
27. A 3D finite element formulation describing the frictional behavior of rubber on ice and concrete surfaces10.1108/02644400110387109 ↗
28. Coefficients of Friction for Concrete. The Physics Factbook; https://hypertextbook.com/facts/2006/MatthewMichaels.shtml.