journal article·2025-09Open access

Study on casting infiltration properties of ZTA/Fe wear resistant composites assisted by self-exothermic powders of Al-Ni2O3

Wenzhen Yu, Yimin Gao, Noritsugu Umehara, Takayuki Tokoroyama, Kaihong Zheng, Yiran Wang

Materials & Design· Volume 257

Abstract

• A scalable method to enhance infiltration depth by 36.7% without raising casting temperature. • The casting infiltration formula is obtained: h Depth = 0.02795 Δ H Powder + 0.0018 Δ H Matrix - 18.45 . • A novel metal matrix composite interface capable of better harmonizing two brittle materials is designed. Ceramic particle-reinforced Fe matrix composites have become the preferred choice to replace traditional Fe-wear-resistant materials. However, premature cooling of the liquid metal limits the further improvement of casting infiltration depth, making it difficult for the composite material to meet higher performance requirements. To address this, the present work conducted casting infiltration validation experiments on steel matrix wear-resistant composites reinforced with ceramic particles and assisted by Al-Ni 2 O 3 self-exothermic powders. A scalable method was developed to enhance the interface infiltration depth by 36.7 % without increasing the casting temperature. ZTA/Fe composites with a tough interfacial structure, featuring amorphous metal oxide cushioning properties, were prepared. These composites form a “hard–soft–hard” toughness sandwich structure at the interface and utilize the cushioning toughness of amorphous metal oxide to accommodate interfacial deformation and enhance load transfer. The casting infiltration depth can be freely adjusted, and the following empirical formula was obtained: h Depth = 0.02795 Δ H Powder + 0.0018 Δ H Matrix - 18.45
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Ultrasonic elliptic vibration cutting of difficult-to-machine materials: a review10.1007/s12541-024-01204-3 ↗
2. The relationship between the abrasive wear resistance, hardness and microstructure of ferritic materials10.1016/0043-1648(74)90101-X ↗
3. Achieving the superior abrasive wear resistance in ZTAP/Fe composites from the theoretical calculations guided designing of metallurgical interface transition layer10.1016/j.actamat.2024.120286 ↗
4. Microstructure and mechanical properties of Fe matrix composites reinforced by nickel–chromium double-layer coated ZTAP ceramics10.1016/j.ceramint.2020.03.284 ↗
5. Preparation of Fe3Al alloy by combustion synthesis melt-casting under ultra-high gravity10.1080/10426914.2011.585504 ↗
6. Interface structure and wear behavior of Cr26 ferrous matrix surface composites reinforced with CTCP10.1007/s11249-014-0303-6 ↗
7. Thermodynamic analysis of the interface reaction and thermal stress of WCp/Fe composites10.1016/j.ceramint.2020.06.310 ↗
8. Study on the microstructure and properties of iron-based composites locally reinforced by in-situ submicron TiC particles10.1016/j.matchemphys.2022.126376 ↗
9. Numerical analysis of the mechanical behavior of ZTAp/Fe composites10.1016/j.commatsci.2017.05.021 ↗
10. W.Y. YU WZ, GAO YM. et al., Preparation process of cast infiltrated self-exothermic ceramic particle precursors, Found. Technol., 44 (2023) 899-908.
11. Modification of ZTA particles with Ni coating by electroless deposition10.1080/02670844.2016.1248119 ↗
12. Volume fraction effect of stainless steel on microstructure, interface, corrosion and wear behavior of stainless steel/aluminum bimetal composites10.1016/j.matchemphys.2022.126068 ↗
13. Three-body abrasive wear resistance of iron matrix composites reinforced with ceramic particles10.1177/1350650113496700 ↗
14. Thermodynamic study on self-propagating high temperature synthesis of TiB2/Fe composites10.1007/s11595-019-2115-x ↗
15. Interfacial characteristics and wear performances of iron matrix composites reinforced with zirconia-toughened alumina ceramic particles10.1016/j.ceramint.2021.09.214 ↗
16. Interfacial characterization and erosive wear performance of zirconia toughened alumina ceramics particles reinforced high chromium white cast irons composites10.1016/j.triboint.2021.107262 ↗
17. Preparation of nickel coating on ZTA particles by electroless plating10.1016/j.ceramint.2018.03.055 ↗
18. NixCr (x=2 and 3): the top choice for enhancing bonding performance of ZTA-Fe interfaces demonstrated by first principles calculations10.1007/s10853-024-09384-z ↗
19. Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α-Al2O3 interfaces by first-principles study10.1016/j.scriptamat.2020.08.021 ↗
20. Preform-based production of Al2O3-reinforced aluminium matrix composites by using various modification techniques10.1007/s12540-019-00520-y ↗
21. Preparation of W–Ni graded alloy by combustion synthesis melt-casting under ultra-high gravity10.1016/j.matlet.2011.07.043 ↗
22. Effect of centrifugal casting temperature on the microstructure and properties of ZTA P /HCCI matrix composites10.1088/2053-1591/abe012 ↗
23. The effect of volume fraction of WC particles on erosion resistance of WC reinforced iron matrix surface composites10.1016/S0043-1648(03)00290-4 ↗
24. First-principles investigations of the structural, anisotropic mechanical, thermodynamic and electronic properties of the AlNi2Ti compound10.3390/cryst8020093 ↗
25. Preparation and interface investigation of Fe/Al2O3P composite activated by Ni and Ti10.1002/adem.201600302 ↗
26. Rapid solidification of Fe3Al alloy by combustion synthesis melt-casting under ultra-high gravity field
27. Interfacial bonding and abrasive wear behaviours of the iron matrix composites10.1080/02670836.2022.2068244 ↗
28. Impact wear resistance of WC/Hadfield steel composite and its interfacial characteristics10.1016/j.wear.2005.04.010 ↗
29. Theoretical calculations on the adhesion, stability, electronic structure, and bonding of Fe/WC interface10.1016/j.apsusc.2011.01.072 ↗
30. Theoretical study on the electronic properties and stabilities of low-index surfaces of WC polymorphs10.1016/j.commatsci.2010.10.033 ↗
31. Review of preparation and application of copper–steel bimetal composites10.1680/jemmr.17.00008 ↗
32. A reaction study for Al–Ni2O3 nano self-exothermic materials10.1016/j.ceramint.2023.12.038 ↗
33. Interface characteristics and wear performance of ZTAP@Ti+TiB2 dual-scale particle reinforced iron matrix composites
34. Effect of Ti and TiN inter-layers on the composite interfacial wettability and composite abrasive wear resistance10.1016/j.triboint.2025.110615 ↗
35. Revealing the mechanism of abruptly dropping of the wetting angle for the cast iron and zirconia ceramic system10.1016/j.matdes.2024.113232 ↗
36. I.S. Cho, Y.S. M., G.V. M., S.K. D., L.C. H., J.K. and Choi, Calculation of thermophysical properties of iron casting alloys, Int. J. Cast Metal. Res., 22 (2009) 43-46.10.1179/136404609X367308 ↗
37. Effect of ZTA volume fractions on the microstructure and properties of ZTAp/high manganese steel composites10.1088/2053-1591/aafbf2 ↗
38. Temperature and stress field analysis of solidification process in high chromium cast iron matrix composite reinforced by ZTA ceramic particles10.1088/2053-1591/ab38f8 ↗
39. On the specific heat and thermal diffusivity of CGI and SGI cast irons10.1080/13640461.2017.1292987 ↗
40. Relationship between nanoindentation and wear properties of stainless steel-reinforced aluminium matrix composite10.1007/s11249-017-0950-5 ↗