journal article·2016-07

Thermal and mechanical properties of a multifunctional composite square honeycomb sandwich structure

Guo-Cai Yu, Li-Jia Feng, Lin-Zhi Wu

Materials & Design· Volume 102
Publisher page

Abstract

Abstract A multifunctional composite square honeycomb sandwich structure (MCHSS) is developed which provides both high thermal conductivity and adequate mechanical property for a thermal management system. The out-of-plane thermal conductivity of MCHSS is improved by a simple method of coating highly oriented graphite film (HOGF), and investigated both theoretically and experimentally. There are two most efficient methods to further enhance the out-of-plane thermal conductivity of MCHSS: one is to increase the HOGF volume content, and the other, to decrease the interface thermal resistance. The maximum improvement is up to approximately 26 times for the measured out-of-plane thermal conductivity as compared with the traditional composite sandwich structures. Results indicate that, except for high specific thermal conductivity for thermal management, MCHSS also possess adequate mechanical properties for structural applications. Thus, MCHSS can be considered as a promising candidate for multifunctional structure material in the high-end heat dissipation field.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Thermal properties of materials · Heat and Mass Transfer in Porous Media

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Ashby · 2000
2. Multifunctionality of cellular metal systems10.1016/S0079-6425(98)00004-8 ↗
3. Mechanical behavior of metallic foams10.1146/annurev.matsci.30.1.191 ↗
4. Ultra-light CRH wind deflector fabricated by woven lattice sandwich composites10.1016/j.compscitech.2014.07.018 ↗
5. Modal response of all-composite corrugated sandwich cylindrical shells10.1016/j.compscitech.2015.04.015 ↗
6. The compressive response of carbon fiber composite pyramidal truss sandwich cores10.3139/146.101594 ↗
7. Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures10.1016/j.compstruct.2010.03.010 ↗
8. Stretch–bend-hybrid hierarchical composite pyramidal lattice cores10.1016/j.compstruct.2012.11.004 ↗
9. Mechanical response of carbon fiber composite sandwich panels with pyramidal truss cores10.1016/j.compositesa.2012.11.011 ↗
10. Mechanical properties of carbon fiber composite octet-truss lattice structures10.1016/j.compscitech.2015.09.022 ↗
11. Quasistatic deformation and failure modes of composite square honeycombs10.2140/jomms.2008.3.1315 ↗
12. The through thickness compressive sandwich panel with a hierarchical square honeycomb sandwich core10.1115/1.3086436 ↗
13. Sandwich panels with Kagome lattice cores reinforced by carbon fibers10.1016/j.compstruct.2006.09.011 ↗
14. Designing hybrid materials10.1016/S1359-6454(03)00441-5 ↗
15. Graphitization behavior of carbon film prepared from high modulus polyimide film: synthesis of high-quality graphite film10.1016/0008-6223(94)90085-X ↗
16. Enhancing the thermal conductivity of carbon fiber reinforced polymer composite laminates by coating highly oriented graphite films10.1016/j.matdes.2015.09.096 ↗
17. Heat transfer in adhesively bonded honeycomb core panels
18. Pulse method of measuring thermal diffusivity at high temperatures10.1063/1.1729564 ↗
19. Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity10.1063/1.1728417 ↗
20. Enhancement of out-of-plane thermal conductivity of sandwich construction using carbon foam10.1016/j.compscitech.2012.02.003 ↗