The synergistic effects of surface condition and Si on the initial corrosion behavior of 9Cr ferritic/martensitic steel in liquid lead-bismuth eutectic
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Nuclear reactor physics and engineering · Fusion materials and technologies · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A peridynamic model for oxidation of T91 steel in liquid lead-bismuth eutectic10.1016/j.jnucmat.2024.155594 ↗
2. Corrosion behavior of T91 steel in liquid lead-bismuth eutectic at 550 ℃: effects of exposure time and dissolved oxygen concentration10.1016/j.corsci.2022.110405 ↗
3. Characterization of corrosion phenomena and kinetics on T91 ferritic/martensitic steel exposed at 450 and 550 ℃ to flowing Pb-Bi eutectic with 10−7 mass% dissolved oxygen10.1016/j.jnucmat.2017.07.031 ↗
4. Multiscale investigation of quasi-brittle fracture characteristics in a 9Cr-1Mo ferritic-martensitic steel embrittled by liquid lead-bismuth under low cycle fatigue10.1016/j.corsci.2015.10.003 ↗
5. Growth and exfoliation behavior of the oxide scale on 316L and T91 in flowing liquid lead-bismuth eutectic at 480 ℃10.1007/s11085-019-09953-7 ↗
6. Corrosion behavior of 304L stainless steel by wire arc additive manufacturing in liquid lead-bismuth eutectic at 550 ℃10.1016/j.jnucmat.2024.155598 ↗
7. Environmental degradation of structural materials in liquid lead- and lead-bismuth eutectic-cooled reactors10.1016/j.pmatsci.2022.100920 ↗
8. On oxidation film structure of SIMP steel exposed in stagnant oxygen-saturated LBE at 600 ℃10.1016/j.corsci.2024.111927 ↗
9. Understanding corrosion behavior differences of Al-modified and Si-modified austenitic steels in lead-bismuth eutectic with 10−6 wt% oxygen at 600 ℃ for up to 6000 h through multiscale characterization10.1016/j.corsci.2025.113099 ↗
10. Effect of Si content on the mechanical behavior and microstructure of a 9Cr ferritic/martensitic steel10.1016/j.jmrt.2024.01.239 ↗
11. Unraveling the local stress corrosion cracking behavior of Alloy 690 plug in a high-temperature concentrated alkaline solution10.1016/j.corcom.2024.12.001 ↗
12. Development of prediction model for stress corrosion cracking probability in scratched alloy 690TT heat transfer tubes10.1016/j.corcom.2024.05.001 ↗
13. Influence of surface roughness on the corrosion behavior of Alloy 690TT in PWR primary water10.1016/j.nucengdes.2014.08.023 ↗
14. Corrosion resistance of open die forged austenitic stainless steel samples prepared with different surfaces10.3390/su13115871 ↗
15. Effects of cutting parameter on microstructure and corrosion behavior of 304 stainless steel in simulated primary water10.1016/j.jmst.2021.04.081 ↗
16. The effect of surface grinding on the stress corrosion cracking initiation of 316LN stainless steel in 600 ℃ supercritical CO210.1016/j.corsci.2024.112147 ↗
17. Understanding the effect of surface finish on stress corrosion crack initiation in warm-forged stainless steel 304L in high-temperature water10.1016/j.scriptamat.2019.01.032 ↗
18. Influence of surface state on the corrosion behavior of Si-reinforced F/M steels under solid-phase oxygen-controlled static liquid LBE environment
19. Microstructure and corrosion property evolution of a surface-nanostructured 15-15Ti austenitic steel during immersion in liquid LBE at 550 ℃10.1016/j.jnucmat.2024.155475 ↗
20. Enhanced corrosion resistance of 15-15Ti austenitic steel in liquid lead-bismuth eutectic at 550 ℃ by shot peening processing10.1016/j.corsci.2023.111640 ↗
21. Effects of pre-formed nanostructured surface layer on oxidation behaviour of 9Cr2WVTa steel in air and liquid Pb-Bi eutectic alloy10.1016/j.corsci.2015.10.021 ↗
22. Understanding shot peening-enhanced corrosion resistance in AFA steel exposed to LBE with 10−6 wt% oxygen at 600 ℃: precipitation-recrystallization interaction in deformation layer10.1016/j.corsci.2025.113439 ↗
23. A high-resolution study of the different surface state effects on the corrosion behaviors of a ferritic steel and an austenitic steel in supercritical water10.1016/j.corsci.2022.110757 ↗
24. Effect of surface finish on high-temperature oxidation of steels in CO2, supercritical CO2, and air10.1007/s11085-019-09938-6 ↗
25. The effect of Si on the microstructure and corrosion resistance of XSi9Cr ferritic/martensitic steel in oxygen-saturated lead-bismuth eutectic10.1016/j.corsci.2025.113079 ↗
26. Silicon-containing ferritic/martensitic steel after exposure to oxygen-containing flowing lead-bismuth eutectic at 450 and 550 ℃10.1016/j.jnucmat.2015.11.058 ↗
27. Effect of silicon on dynamic/static corrosion resistance of T91 in lead-bismuth eutectic at 550 ℃10.3390/ma15082862 ↗
28. Effect of silicon on the oxidation resistance of 9 wt% Cr heat resistance steels in 550 ℃ lead-bismuth eutectic10.1016/j.corsci.2016.04.020 ↗
29. Silicon enhances high temperature oxidation resistance of SIMP steel at 700 ℃10.1016/j.corsci.2020.108519 ↗
30. Evolution of microstructure and mechanical properties of 9Cr ferrite/martensite steels with different Si content after long-term aging at 550 ℃10.1016/j.jallcom.2021.159817 ↗
31. Study on the grain refinement mechanism of the machined surface of Inconel 71810.1016/j.jmrt.2024.01.202 ↗
32. Microstructure evolution and dynamic recrystallization mechanism induced by grinding of Ni-based single crystal superalloy10.1016/j.jmatprotec.2022.117784 ↗
33. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
34. An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment10.1016/S1359-6454(02)00310-5 ↗
35. Texture, residual strain, and plastic deformation around scratches in alloy 600 using synchrotron X-ray Laue micro-diffraction10.1016/j.jnucmat.2007.10.015 ↗
36. A method for the non-destructive analysis of gradients of mechanical stresses by X-ray diffraction measurements at fixed penetration/information depths10.1107/S0021889806023417 ↗
37. Long-term behaviors of oxide layer in liquid lead-bismuth eutectic (LBE), Part I: model development and validation10.1007/s11085-013-9450-7 ↗
38. Long-term behaviors of oxide layer in liquid lead-bismuth eutectic (LBE), Part II: model applications10.1007/s11085-014-9469-4 ↗
39. Revealing corrosion mechanism of Si-doping 9 wt% Cr F/M steels in oxygen-saturated static and flowing LBE at 550 ℃10.1016/j.jnucmat.2025.156011 ↗
40. On the role of dislocations in bulk diffusion10.1016/0001-6160(57)90127-X ↗
41. Improving the oxidation resistance of SIMP steel to liquid Pb-Bi eutectic by shot peening treatments10.1016/j.apsusc.2021.151910 ↗
42. Grain boundary engineering for enhancing intergranular damage resistance of ferritic/martensitic steel P9210.1007/s41365-024-01399-0 ↗
43. Applying grain boundary engineering and stabilizing heat treatment to 321 stainless steel for enhancing intergranular corrosion resistance10.1007/s11665-023-08513-0 ↗
44. Influence of Si addition on the corrosion behavior of 9 wt% Cr ferritic/martensitic steels exposed to oxygen-controlled molten Pb-Bi eutectic at 550 and 600 ℃10.1016/j.corsci.2021.109871 ↗
45. High temperature oxidation behavior of SIMP steel10.1007/s11085-015-9532-9 ↗
46. Atomic mechanisms of grain boundary diffusion: low versus high temperatures10.1007/s10853-005-2678-0 ↗
47. The effect of surface grinding and Si addition on the corrosion of Fe-12Cr ODS steels in supercritical CO210.1016/j.corsci.2023.111533 ↗
48. A comparative study on the corrosion performance of four FeCrAl alloys with different Cr contents in contact with oxygen-saturated LBE10.1016/j.jmrt.2023.02.033 ↗
49. Effect of Cr on the microstructure and strength-toughness of high-strength and heat-resistant stainless steel10.1002/srin.202400412 ↗
50. Screening of the FeCrAl LBE corrosion-resistant coatings: the effect of Cr and Al contents10.1016/j.surfcoat.2023.129477 ↗