journal article·2026-05Open access

Spatial and temporal evolution of temperature, hardness, and residual stress in linear friction welding of wrought and 3D-printed near-net blanks

Mohan Raj Pandiyan, Yoshiaki Morisada, Kohsaku Ushioda, Hidetoshi Fujii, Buchibabu Vicharapu

Materials & Design· Volume 265

Abstract

• Established a linear relation between the workpiece burn-off rate and specific power input, eliminating the dependence on experimental data for modelling predictions. • Residual stress evolution during linear friction welding between the printed-to-printed and printed-to-conventional is modelled and validated for the first time in the literature. • Modelled the evolution of temperature, residual stress, and hardness over 150 process combinations, and validated the computed results with 31 measured values. • The higher frictional pressure and the lower rubbing velocity parameter combination yielded joints with excellent structure and properties, with lower residual stresses. • Developed the processing maps for peak temperature, residual stress, and hardness using a 432 data set, which can be used to avoid the undesirable structure and properties. Determining appropriate combinations of process parameters in linear friction welding of Ti6Al4V to obtain defect-free joints while maintaining peak residual stresses within permissible limits remains challenging. Current literature offers limited insights into the underlying process–property relationships, particularly in the welding of both conventional and hybrid near-net couples. The existing process modelling approaches, including fully and loosely coupled thermal-displacement models, could resolve the issue. However, such models are constrained by extensive computational requirements and dependence on experimental inputs, respectively. Therefore, a loosely coupled and experimentally independent thermal–displacement model was developed to compute the temporal and spatial evolution of temperature, hardness, and residual stresses. The dynamic recrystallization and phase transformation kinetics mechanisms are incorporated in the model for accurate prediction of hardness and residual stresses. The analysis was conducted across ∼144 process parameter combinations, and the results were validated using ∼30 measured independent data points. Comprehensive process maps for interfacial peak temperature, hardness, and residual stresses are generated using a 432-size dataset. Overall, the results show that a combination of higher frictional pressure and lower rubbing velocity yields joints with excellent structure, properties and lower residual stresses. The rubbing velocity is a product of the workpiece’s oscillation frequency and amplitude.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Engineering and Environmental Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. A literature review of Ti-6Al-4V linear friction welding10.1016/j.pmatsci.2017.10.003 ↗
2. Linear friction welding for manufacturing of propellant management device for satellites
3. Effect of linear friction welding process on microstructure evolution, mechanical properties and corrosion behavior of GH4169 superalloy10.1016/j.cja.2024.03.039 ↗
4. Microstructure evolution and mechanical properties of a linear friction welded TC4-DT titanium alloy joint
5. Towards understanding the structure-property evolution mechanisms in wrought-to-printed and printed-to-printed linear friction-welded Ti alloy near-net blanks for aerospace applications10.1016/j.jmatprotec.2025.118756 ↗
6. Linear friction welding of Ti-6Al-4V alloy fabricated below β-phase transformation temperature10.1016/j.scriptamat.2020.09.013 ↗
7. Effect of the welding parameters on microstructure and mechanical properties of linear friction-welded Ti-6Al-4V alloy10.1016/j.jmapro.2022.01.033 ↗
8. Linear friction welding of Ti–6Al–4V: modelling and validation10.1016/j.actamat.2011.02.028 ↗
9. 3D modelling of Ti–6Al–4V linear friction welds10.1080/13621718.2016.1263439 ↗
10. A computationally efficient thermal modelling approach of the linear friction welding process10.1016/j.jmatprotec.2017.09.013 ↗
11. High-frequency linear friction welding of a titanium alloy10.1016/S0043-1648(98)00145-8 ↗
12. Modelling the influence of the process inputs on the removal of surface contaminants from Ti–6Al–4V linear friction welds10.1016/j.matdes.2014.10.058 ↗
13. Linear friction welding of Ti-6Al-4V: processing, microstructure, and mechanical-property inter-relationships10.1007/s11661-005-0335-5 ↗
14. Energy and force analysis of Ti-6Al-4V linear friction welds for computational modeling input and validation data10.1007/s11661-014-2575-8 ↗
15. Finite element models of friction behaviour in linear friction welding of a Ni-based superalloy10.1016/j.ijmecsci.2019.01.014 ↗
16. Friction taper stitch welding of a duplex stainless steel10.1038/s41598-023-48754-6 ↗
17. Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining10.1007/s00170-015-7508-1 ↗
18. A process-microstructure finite element simulation framework for predicting phase transformations and microhardness for directed energy deposition of Ti6Al4V
19. Effect of hot working on flow behaviour of Ti–6Al–4V alloy in single-phase and two-phase regions10.1016/j.matdes.2010.01.060 ↗
20. An improved prediction of residual stresses and distortion in additive manufacturing10.1016/j.commatsci.2016.10.003 ↗
21. Probing residual stresses in stationary shoulder friction stir welding process10.1007/s00170-019-04570-9 ↗
22. Heat reflux in flash and its effect on joint temperature history during linear friction welding of steel10.1016/j.ijthermalsci.2012.12.004 ↗
23. Prediction of residual stress within linear friction welds using a computationally efficient modelling approach10.1016/j.matdes.2017.11.013 ↗
24. Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds10.1016/j.actamat.2009.07.055 ↗