journal article·2021-11Open access

Fabrication of self-supporting structures made of washcoat materials (γ-Al2O3-CeO2) by ceramic stereolithography: Towards digital manufacturing of enhanced catalytic converters

Setareh Zakeri, Teemu Vastamäki, Mari Honkanen, Matti Järveläinen, Minnamari Vippola, Erkki Levänen

Materials & Design· Volume 210

Abstract

Despite increasing interest in the use of alternative fuel, conventional diesel or gasoline powered vehicles still dominate road transportation; removal of their emitted pollutants is a challenge to sustainable transportation. The automotive industry has employed catalytic converters (CCs) to effectively modify or eliminate toxic pollutants emitted by combustion engines. The efficiency of a CC greatly depends on its geometry and is hindered by limitations in fabrication techniques. To go beyond these limits and further enhance the performance of CCs, one can use state-of-the-art ceramic stereolithography (CSL) technology, which enables fabrication of complex-shaped structures. In this work, a novel photocurable ceramic resin made of γ-Al2O3 and CeO2 (the commonly used washcoat materials in CCs) is shaped into the honeycomb and twisted honeycomb structures using CSL. Measurements reveal that upon the addition of CeO2 to the plain γ-Al2O3 resin, the penetration depth of light is significantly decreased from 408.06 μm to 75.19 μm. This research also focuses on the balance between having a high surface area and achieving good physical stability in the printed structures. Accordingly, the appropriately debinded structures are sintered at two different temperatures: 900 °C and 1100 °C. It is found that the structure sintered at 900 °C has a higher surface area, and thus, it is a better candidate for catalytic applications. Furthermore, investigation of the stabilizing effect of CeO2 on printed γ-Al2O3 finds that CeO2 is effective in stabilizing the printed γ-Al2O3 at1100 °C but not 900 °C. Targeting the realization of green and sustainable transportation, the applied CSL technique in this study enables flexible control in the design and fabrication of self-supporting structures that are expected to open promising ways for the optimization of CCs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Designed synthesis of highly active CeO2 - ZrO2 - Al2O3 support materials with optimized surface property for pd-only three-way catalysts10.1016/j.apsusc.2019.144866 ↗
2. Geometric effects in the design of catalytic converters in car exhaust pipes10.1186/s40929-018-0018-2 ↗
3. Effect of wash coat layers on the conversion efficiency of a catalytic converter in the si engine
4. Preparation and properties of a γ-al2o3 washcoat deposited on a ceramic honeycomb10.1016/j.surfcoat.2004.05.029 ↗
5. Analysis of the mass transfer controlled regime in automotive catalytic converters10.1016/j.ijheatmasstransfer.2007.04.044 ↗
6. The effect of powder characteristics on washcoat quality. part i: Alumina washcoats10.1016/S0955-2219(99)00218-6 ↗
7. Sintering of pelleted catalysts for automotive emission control
8. Investigation of phase transition of γ-alumina to α-alumina via mechanical milling method10.1080/01411590802008012 ↗
9. Control of the γ-alumina to α-alumina phase transformation for an optimized alumina densification10.1016/j.bsecv.2016.10.001 ↗
10. Development of alumina–ceria ceramic composite cutting tool10.1016/j.ijrmhm.2003.10.005 ↗
11. Ceria-stabilized meso- Al2O3: synthesis, characterization and desorption kinetics10.1007/s10934-017-0376-3 ↗
12. Remarkable stabilization of transition alumina operated by ceria under reducing and redox conditions10.1016/S0926-3373(00)00226-5 ↗
13. The effect of space velocity on the dynamic characteristics of an automotive catalytic converter
14. Effect of flow distribution on emissions performance of catalytic converters
15. A review on additive manufacturing and materials for catalytic applications: milestones, key concepts, advances and perspectives10.1016/j.matdes.2021.109927 ↗
16. 3D printing of a heterogeneous copper-based catalyst10.1016/j.jcat.2015.11.019 ↗
17. 3d printing of metal-organic frameworks decorated hierarchical porous ceramics for high-efficiency catalytic degradation10.1016/j.cej.2020.125392 ↗
18. Customized three-dimensional porous catalyst for knoevenagel reaction10.1007/s10934-020-00859-3 ↗
19. Three-dimensional printing of porous carbon structures with tailorable pore sizes10.1016/j.cattod.2018.05.044 ↗
20. Scalability of 3d printed structured porous milli-scale reactors10.1016/j.cej.2019.01.082 ↗
21. Electrical conductive 3d-printed monolith adsorbent for co2 capture10.1016/j.micromeso.2019.01.009 ↗
22. Stereolithography as a manufacturing method for a hierarchically porous zsm-5 zeolite structure with adsorption capabilities10.1016/j.ceramint.2020.12.190 ↗
23. A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
24. 3d printing of ceramic cellular structures for potential nuclear fusion application
25. Complex mullite structures fabricated via digital light processing of a preceramic polysiloxane with active alumina fillers10.1016/j.jeurceramsoc.2018.11.038 ↗
26. Freeform fabrication of ceramics via stereolithography10.1111/j.1151-2916.1996.tb09022.x ↗
27. Experimental and theoretical characterization of the optical properties of CeO2, SrCeO3, and Sr2CeO4 containing Ce4+ (f0) ions10.1021/cm034618u ↗
28. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
29. Vastamäki · 2019
30. Fabrication of ceramic components with hierarchical porosity10.1007/s10853-010-4708-9 ↗
31. Synthesis and characterization of mesoporous ceria/alumina nanocomposite materials via mixing of the corresponding ceria and alumina gel precursors10.1016/j.jcis.2006.11.039 ↗
32. Simultaneous atmosphere and temperature cycling of three-way automotive exhaust catalysts