journal article·2019-11Open access

Development of a robust, self-cleaning, amphiphobic, and electrically conductive coating on a flexible polymer substrate

Wenhui Yao, Young-Joon Kang, Sung-Gyu Park, Oi Lun Li, Young-Rae Cho

Materials & Design· Volume 182

Abstract

Amphiphobic surfaces are repellent to water and oils, which are usually developed on rigid materials. The numerous advantages of flexible materials over rigid materials, especially the fabrication of deformable electronic devices, have accelerated research on polymer substrates. Electrically conductive materials with amphiphobicity could further improve the performance of electronic devices. Herein, an amphiphobic and electrically conductive coating was fabricated on a flexible polymer substrate. An overhang structure was constructed on well-distributed microscale pillars using sputtering by a glancing angle deposition technique. The surface was then chemically modified using drysurf solution. The coating exhibited high repellency to various liquids with different surface tensions. In addition, the good self-cleaning property made it easy to clean the contaminants on the surface using water droplets. To test the feasibility of the deposited Ag film on the polymer substrate as a flexible electrode, a cyclic fatigue test was employed. Under the repeated fatigue test, the coating performed well, with a minimal change in the electrical resistance for 5000 bending cycles. Furthermore, the coating presented good resistance to chemical immersion tests. The superior performance in the amphiphobicity, self-cleaning property, and mechanical and chemical robustness promised it to be a good candidate for electrode materials for flexible electronics.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. W. Barthlott, C. Neinhuis, Purity of the sacred lotus, or escape from contamination in biological surfaces, Planta 202 (1997) 1–8.10.1007/s004250050096 ↗
2. A reversible wet/dry adhesive inspired by mussels and geckos10.1038/nature05968 ↗
3. Biophysics: water-repellent legs of water striders10.1038/432036a ↗
4. Fabrication of CuO hierarchical flower-like structures with biomimetic superamphiphobic, self-cleaning and corrosion resistance properties10.1016/j.cej.2015.08.112 ↗
5. A lotus effect-inspired flexible and breathable membrane with hierarchical electrospinning micro/nanofibers and ZnO nanowires10.1016/j.matdes.2018.11.041 ↗
6. Fabrication, surface properties, and origin of superoleophobicity for a model textured surface10.1021/la104872q ↗
7. Facile design of “sticky” near superamphiphobic surfaces on highly porous substrate10.1016/j.matdes.2018.04.063 ↗
8. Colorful superamphiphobic coatings with low sliding angles and high durability based on natural nanorobs10.1021/acsami.6b13539 ↗
9. Transparent, conductive, and superhydrophobic nanocomposite coatings on polymer substrate10.1016/j.jcis.2017.07.071 ↗
10. J. Song, S. Huang, K. Hu, Y. Lu, X. Liu, W. Xu, Fabrication of superoleophobic surfaces on Al substrates, J. Mater. Chem. A 1 (2013) 14783–14789.10.1039/c3ta13807k ↗
11. Turning a surface superrepellent even to completely wetting liquids10.1126/science.1254787 ↗
12. Nanonails: a simple geometrical approach to electrically tunable superlyophobic surfaces10.1021/la702327z ↗
13. Significant enhancement of the adhesion between metal films and polymer substrates by UV-ozone surface modification in nanoscale10.1021/acsami.6b09930 ↗
14. Impact of pillar configuration on the amphiphobicity of micro-patterned polymer surface10.1016/j.vacuum.2018.07.024 ↗
15. Morphological/nanostructural control toward intrinsically stretchable organic electronics10.1039/C8CS00834E ↗
16. M. Asad, Q. Li, C. Lee, M. Sachdev, W. Wong, Integration of GaN light-emitting diodes with a-Si:H thin-film transistors for flexible displays, Nanotechnology 30 (2019) 324003–324008.10.1088/1361-6528/ab1a5e ↗
17. Polymer-based microfluidic chip for rapid and efficient immunomagnetic capture and release of listeria monocytogenes10.1039/C5LC00852B ↗
18. Wearable and implantable devices for cardiovascular healthcare: from monitoring to therapy based on flexible and stretchable electronics10.1002/adfm.201808247 ↗
19. Flexible electronics toward wearable sensing10.1021/acs.accounts.8b00500 ↗
20. Mechanically durable superhydrophobic surfaces10.1002/adma.201003129 ↗
21. Bioinspired surfaces with superamphiphobic properties: concepts, synthesis, and applications10.1002/adfm.201707415 ↗
22. Fracture and delamination of chromium thin films on polymer substrates10.1007/s11661-009-9988-9 ↗
23. Graphene electronic fibres with touch-sensing and light-emitting functionalities for smart textiles
24. Preparation of thin metal layers on polymers
25. Early stage anti-bioadhesion behavior of superhydrophobic soot based coatings towards pseudomonas putida10.1016/j.matdes.2018.09.037 ↗
26. Hazard assessment of fluorinated alternatives to long-chain perfluoroalkyl acids (PFAAs) and their precursors: status quo, ongoing challenges and possible solutions10.1016/j.envint.2014.11.013 ↗
27. Storage degradation of palm-derived biodiesels: its effects on chemical properties and engine performance10.1016/j.renene.2011.05.032 ↗
28. Failure mechanism of patterned ITO electrodes on flexible substrate under static and dynamic mechanical stresses10.4028/www.scientific.net/SSP.124-126.411 ↗
29. Gold coating of polyethylene modified by argon plasma discharge10.1002/pen.20606 ↗
30. A new approach to understand the Cassie state of liquids on superamphiphobic materials10.1039/C5NR07678A ↗
31. Green synthesis of silver nanoparticles from leaf extract of Mimusops elengi, Linn. for enhanced antibacterial activity against multi drug resistant clinical isolates10.1016/j.colsurfb.2013.03.017 ↗
32. Tansy fruit mediated greener synthesis of silver and gold nanoparticles10.1016/j.procbio.2010.03.024 ↗