Effect of base metal and welding speed on fusion zone microstructure and HAZ hot-cracking of electron-beam welded Inconel 718
Source abstract
Abstract
Abstract Influences of base metal and welding speed on fusion zone microstructure and heat affected zone (HAZ) hot-cracking of electron beam welded (EBW) Inconel 718 were investigated systematically. Microstructures of fusion zone and HAZ were characterized using the optical microscope and a field emission scanning electron microscope, complemented by the microhardness measurements. It is found that the weld shape transforms from a stemless wine glass shape to a nail head shape with the increase of the grain size of base metal. The largest amount of Laves or the lowest hardness is obtained in the center of the weld pool, which mainly due to the strong microsegregation in this region. The microsegregation of weld pool is significantly affected by welding speed, which is associated with the rate of transference of energy to the weld. The occurrence of HAZ cracking is related to the grain boundary and the generation of porosities is induced by fracture of the brittle carbides. Furthermore, the susceptibility of HAZ cracking is greatly dependent on the grain size of base metal and welding speed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Metallurgy and Material Forming · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructural evolution and mechanical properties of Inconel 718 after thermal exposure10.1016/j.msea.2015.03.004 ↗
2. New constitutive model for high-temperature deformation behavior of Inconel 718 superalloy10.1016/j.matdes.2015.03.001 ↗
3. Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy10.1016/j.jallcom.2015.07.149 ↗
4. Dynamic recrystallization behavior a typical nickel-based superalloy during hot deformation10.1016/j.matdes.2013.12.072 ↗
5. Hot tensile deformation behaviors and fracture characteristics of a typical nickel-based superalloy10.1016/j.matdes.2013.10.071 ↗
6. Microstructure evolution of delta-processed IN718 during holding period after hot deformation10.1007/s10853-011-5792-1 ↗
7. A study of cold metal transfer clads in nickel-base INCONEL 718 superalloy10.1016/j.matdes.2013.12.060 ↗
8. Microstructure and mechanical properties of friction welded alloy 71810.1016/j.msea.2012.10.035 ↗
9. Influence of filler metals and welding techniques on the structure–property relationships of Inconel 718 and AISI 316L dissimilar weldments10.1016/j.matdes.2014.05.019 ↗
10. Controlling hot cracking in Ni-based Inconel-718 superalloy cast sheet during tungsten inert gas welding10.1016/j.jmatprotec.2015.03.031 ↗
11. Study on laser beam welding/superplastic forming technology of multi-sheet cylinder sandwich structure for Inconel 718 superalloy with ultra-fine grains10.1016/j.matdes.2012.02.002 ↗
12. Hot tensile and stress rupture behavior of friction welded alloy 718 in different pre-and post-weld heat treatment conditions10.1016/j.msea.2014.06.076 ↗
13. Microstructural and mechanical properties of friction-stir-welded and post-heat-treated Inconel 718 alloy10.1016/j.jallcom.2010.06.016 ↗
14. Microstructural analysis of fusion and heat affected zones in electron beam welded ALLVAC® 718 PLUS™ superalloy10.1016/j.msea.2007.08.002 ↗
15. Vishwakarma · 2005 · 637
16. Effect of post-weld heat treatments on microstructure and mechanical properties of friction welded alloy 718 joints10.1016/j.matdes.2013.07.091 ↗
17. Laves phase control in Inconel 718 weldments10.4028/www.scientific.net/MSF.710.614 ↗
18. Thermal aging effects on the microstructure of Nb-bearing nickel superalloy weld overlays using ultrasound techniques10.1016/j.matdes.2011.11.035 ↗
19. Residual stresses in Inconel 718 electron beam welds10.1023/B:JMSC.0000045609.86430.19 ↗
20. The formation and control of Laves phase in superalloy 718 welds10.1023/A:1018541915113 ↗
21. Control of Laves phase in Inconel 718 GTA welds with current pulsing10.1179/136217104225021788 ↗
22. Effect of humidity on porosity, microstructure, and fatigue strength of A7N01S-T5 aluminum alloy welded joints in high-speed trains10.1016/j.matdes.2015.06.177 ↗
23. Effect of heat input on the heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy10.1016/j.msea.2006.11.054 ↗
24. Microstructural response to heat affected zone cracking of prewelding heat-treated Inconel 939 superalloy10.1016/j.matchar.2011.09.006 ↗
25. Microstructure and mechanical properties of electron beam welded alloy J7510.1016/j.jmst.2013.11.011 ↗
26. Research on fatigue behavior of electron beam welding joint of 06Cr19Ni10 austenitic stainless steel sheet10.1016/j.matdes.2014.01.003 ↗
27. Investigations on the structure–property relationships of electron beam welded Inconel 625 and UNS 3220510.1016/j.matdes.2014.12.032 ↗
28. Signal emitted from plasma during electron-beam welding with deflection oscillations of the beam10.1016/j.jmatprotec.2014.03.031 ↗
29. Microstructure evolution and mechanical properties of high strength 3–9% Ni-steel alloys weld metals produced by electron beam welding10.1016/j.matdes.2014.03.056 ↗
30. Weldability studies on the borated stainless steel using varestraint and gleeble tests10.1007/s40194-014-0185-0 ↗
31. Microstructural modification in full penetration and partial penetration electron beam welds in Inconel-718 (IN-718) and its effect on fatigue crack initiation10.1007/s11661-005-0216-y ↗
32. Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding10.1016/j.jmatprotec.2007.11.224 ↗
33. Modern fiber laser beam welding of the newly-designed precipitation-strengthened nickel-base superalloys10.1016/j.optlastec.2013.09.030 ↗
34. Influence of weld cooling rate on microstructure and mechanical properties of alloy 718 weldments10.1007/s11661-008-9553-y ↗
35. High power CO2 and Nd-YAG laser welding of wrought Inconel 71810.1016/0924-0136(95)01847-6 ↗
36. A study on laser beam welding (LBW) technique: effect of heat input on the microstructural evolution of superalloy Inconel 71810.1007/s11661-010-0319-y ↗
37. Liquation cracking in laser welded joints of Inconel 61710.1016/j.jmatprotec.2015.07.004 ↗
38. The influence of minor elements on the weldability of an Inconel 718-type superalloy10.1007/s11661-002-0033-5 ↗
39. Influence of laser welding heat input on HAZ cracking in newly developed Haynes 282 superalloy10.1179/1743284711Y.0000000078 ↗
40. Effect of homogenization heat treatment on the microstructure and heat-affected zone microfissuring in welded cast alloy 71810.1007/BF02648966 ↗
41. The effect of heat treatment on microfissuring in alloy 718
42. The relationship between grain size and microfissuring in alloy 718
43. The influence of solidification mode on heat affected zone microfissuring in a nickel-iron base superalloy10.1016/0956-7151(93)90218-H ↗
44. An evaluation of heat-affected zone liquation cracking susceptibility, part I: development of a method for quantification
45. Strain theory of hot tearing