Effect of cooling rate and the original matrix on the thermal diffusion alloyed intermetallic layer on magnesium alloys
Source abstract
Abstract
Abstract In order to promote the utilization of the powder thermal diffusion alloying method to protect magnesium alloys, effect of cooling rate as well as the original state of the magnesium alloy specimens including chemical composition and thickness on the as diffusion alloyed intermetallic layer was investigated. The results show that water quenched specimens could have dendritic crystals in the intermetallic layer even at a diffusion temperature lower than the Mg-Al eutectic temperature. Thinner specimens and higher Al content are preferred for the powder thermal diffusion alloying process. Morphology of the Mg17Al12 intermetallic layer with embedded α-Mg islands could be attributed to two main reasons, one is the decomposition of the unstable solution, and the other is liquid saturation and preferential diffusion at heterogeneous structures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. An insight into ignition factors and mechanisms of magnesium based materials: a review10.1016/j.matdes.2016.09.103 ↗
2. Effect of high Mn content on development of ultra-fine grain extruded magnesium alloy10.1016/j.matdes.2015.10.093 ↗
3. Effects of texture and grain size on mechanical properties of AZ80 magnesium alloys at lower temperatures10.1016/j.matdes.2015.09.153 ↗
4. Interface formation in magnesium–magnesium bimetal composites fabricated by insert molding method10.1016/j.matdes.2015.11.095 ↗
5. Twinning characteristic in tension of magnesium alloys and its effect on mechanical properties10.1016/j.matdes.2016.06.073 ↗
6. Fe-based amorphous coating for corrosion protection of magnesium alloy10.1016/j.matdes.2016.07.031 ↗
7. Protective coatings on magnesium and its alloys—a critical review10.1016/S0925-8388(01)01899-0 ↗
8. New insights into the corrosion of magnesium alloys—the role of aluminum10.1016/j.scriptamat.2016.01.008 ↗
9. The effect of solid diffusion surface alloying on properties of ZM5 magnesium alloy10.1016/j.surfcoat.2004.08.214 ↗
10. Improvement of corrosion resistance of pure magnesium via vacuum pack treatment10.1016/j.jallcom.2007.06.097 ↗
11. Improvement of the properties of AZ91D magnesium alloy by treatment with a molten AlCl3–NaCl salt to form an Mg–Al intermetallic surface layer10.1007/s11998-008-9132-6 ↗
12. Evaluation of diffusion welding of 6061 aluminum and AZ31 magnesium alloys without using an interlayer10.1016/j.matdes.2014.09.020 ↗
13. Corrosion properties of surface-modified AZ91D magnesium alloy10.1016/j.corsci.2008.09.034 ↗
14. Effect of surface diffusion alloying on erosion wear property of ZM5 magnesium alloy10.1016/S1003-6326(13)62464-4 ↗
15. Effect of interlayer composition on the microstructure and strength of diffusion bonded Mg/Al joint10.1016/j.matdes.2009.04.040 ↗
16. Fabrication and microstructural characterization of Al/Zn-enriched layers on pure magnesium10.1016/j.matchar.2013.02.004 ↗
17. Effects of treatment time on corrosion of diffusion-alloyed coatings of pure magnesium10.1016/S1006-7191(07)60010-6 ↗
18. Surface alloying of an Mg alloy subjected to surface mechanical attrition treatment10.1016/j.surfcoat.2008.02.010 ↗
19. Research on microstructure and properties of aluminum alloyed coating on AZ91D magnesium alloy by vacuum solid diffusion
20. Effect of temperature on microstructures and properties of aluminized coating on pure magnesium10.1016/j.jallcom.2008.11.093 ↗
21. Surface treatment of AZ91D magnesium alloy by aluminum diffusion coating10.1023/A:1006737200466 ↗
22. Surface alloying of AZ91E alloy by Al–Zn packed powder diffusion coating10.1016/j.surfcoat.2011.07.050 ↗
23. Formation of an aluminum-alloyed coating on AZ91D magnesium alloy in molten salts at lower temperature10.1016/j.surfcoat.2010.09.034 ↗
24. Interdiffusion kinetics of the intermetallic coatings on AZ91D magnesium alloy formed in molten salts at lower temperatures10.1016/j.jallcom.2014.04.209 ↗
25. Intermetallic layer obtained by the compact powder diffusion alloying method on AZ91D magnesium alloy in air10.1016/j.surfcoat.2016.10.048 ↗
26. Protective diffusion coatings on magnesium alloys: a review of recent developments10.1016/j.jallcom.2011.12.124 ↗
27. Heat treatment of cold spray coatings to form protective intermetallic layers10.1016/j.scriptamat.2009.03.002 ↗
28. Continuous intermetallic compounds coatings on AZ91D Mg alloy fabricated by diffusion reaction of Mg–Al couples10.1016/j.surfcoat.2010.10.066 ↗
29. Effect of heat treatment on the intermetallic layer of cold sprayed aluminum coatings on magnesium alloy10.1016/j.surfcoat.2011.04.018 ↗
30. Electrodeposition of chemically and mechanically protective Al-coatings on AZ91D Mg alloy10.1016/j.corsci.2010.09.047 ↗
31. Metallurgical bond between magnesium AZ91 alloy and aluminium plasma sprayed coatings10.1016/j.surfcoat.2015.10.032 ↗
32. Bonding of Mg and Al with Mg–Al eutectic alloy and its application in aluminum coating on magnesium10.1016/j.jallcom.2008.03.107 ↗
33. Microstructure formation in partially melted zone during gas tungsten arc welding of AZ91 Mg cast alloy10.1016/j.matchar.2008.01.022 ↗
34. Study on the microstructure evolution and rheological parameter of semisolid Mg–10Al–4Zn alloys10.1016/j.msea.2007.05.095 ↗
35. Formation of layered Mg/eutectic composite using diffusional processes at the Mg-Al interface10.2478/v10172-011-0074-0 ↗
36. Improved corrosion resistance of AZ91D magnesium alloy by an aluminium-alloyed coating10.1016/j.surfcoat.2004.11.042 ↗
37. Development of the as-cast microstructure in magnesium–aluminium alloys10.1016/S1471-5317(00)00007-9 ↗
38. The effect of aluminium content on the eutectic morphology of high pressure die cast magnesium–aluminium alloys10.1016/j.jallcom.2009.11.199 ↗
39. Thermodynamic origin of surface melting on ice crystals10.1073/pnas.1608888113 ↗
40. Effect of microstructure on mechanical properties of As-cast Mg-Al alloys10.1007/s11661-004-0132-6 ↗
41. Surface alloying of Mg alloys after surface nanocrystallization10.1166/jnn.2008.373 ↗