journal article·2026-01Open access

Selection of pultruded composite materials for new, low-carbon emission, lightweight railways tracks, with a focus on mechanics, economics and sustainability

L. Sudriès, I. Diboune, A. Cloos, O. De Almeida, J. Serra, W. Azoti, B. Castanié

Materials & Design· Volume 261

Abstract

In the context of decarbonizing transport, the selection of materials for lightweight pultruded composite railway tracks adapted for light trains has been achieved. The candidates are made of thermoplastic PA6 and of acrylic-based resin, as well as thermoset epoxy resin with carbon, glass, basalt and flax fibres. A comparison of the economic cost and carbon emissions of each configuration is presented. 175 tensile, compression and off-axis tests were performed. The elastic properties and sizing allowances are provided. An initial estimate of the ecological cost of materials combinations was assessed using a cradle-to-gate approach on raw materials with the Global Warming Potential (GWP) criterion only. The mechanical properties of composites made of acrylic resin are affected by the nature of the fibres due to poor impregnation and the presence of porosity. Compared to acrylic resin, PA6 resin achieves higher strength values. This suggests that the pultrusion process for PA6 resin is less challenging, as it minimizes the occurrence of porosity. As expected, better properties were obtained with carbon fibres, albeit at a significantly higher ecological cost. Configurations involving basalt fibres offer the best ecological cost/performance ratio. Therefore, basalt fibres open up new possibilities for designing and sizing the next generation of composite railways.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Railway Systems and Materials Science · Fiber-reinforced polymer composites · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Service des données et études statistiques (SDES), “Chiffres clés des transports - édition 2023,” https://www.statistiques.developpement-durable.gouv.fr/chiffres-cles-des-transports-edition-2023, 2023 (accessed 10 October 2025).
2. INFRAlight Project: https://www.insa-toulouse.fr/fiche-projet/infralight/ , 2022 (accessed 10 October 2025).
3. A Review of Natural Fibers Reinforced Composites for railroad applications
4. Life cycle cost and assessment of alternative railway sleeper materials10.3390/su14148814 ↗
5. Mechanical testing of innovated composite polymer material for using in manufacture of railway sleepers10.1007/s10924-017-0940-6 ↗
6. Suitability of recycled materials as a composite sleeper: a scoping review10.1016/j.matpr.2022.04.599 ↗
7. Carbon fiber reinforced areca/sisal hybrid composites for railway interior applications: Mechanical and morphological properties10.1002/pc.26364 ↗
8. Research on the lightweight design of GFRP fabric pultrusion panels for railway vehicle10.1016/j.compstruct.2022.115221 ↗
9. Multiscale approach for the design of composite sandwich structures for train application10.1016/j.compstruct.2009.08.044 ↗
10. Laminate design, optimization, and testing of an innovative carbon fiber‐reinforced composite sandwich panel for high‐speed train10.1002/pc.26262 ↗
11. Parametric sizing study for the design of a lightweight composite railway axle10.1016/j.compstruct.2021.113851 ↗
12. Structural analysis for the design of a lightweight composite railway axle10.1016/j.compstruct.2022.115544 ↗
13. A lightweight composite train reinventes rural railways
14. Review of monolithic composite laminate and stiffened structures in aeronautic applications10.1016/j.jcomc.2025.100585 ↗
15. The GAP methodology: a new way to design composite structures10.1016/j.matdes.2019.107755 ↗
16. Enhancing the machinability of basalt fiber-reinforced composites through innovative drill design and material modification10.1007/s12221-025-01102-z ↗
17. Analyzing stiffness variations in 3D woven composites: A multi-instrumental study on Glass/Kevlar hybridization effects under tensile and shear loads10.1016/j.compositesa.2025.108722 ↗
18. Thermoplastic pultrusion: a review10.3390/polym13020180 ↗
19. Recent and future developments in pultrusion technology with consideration for curved geometries: a review10.1016/j.compositesb.2024.111678 ↗
20. Static behaviour of glass fibre reinforced novel composite sleepers for mainline railway track10.1016/j.engstruct.2020.111627 ↗
21. Design criteria for pultruded structural elements, reference module in materials science and materials
22. A numerical homogenization of E-glass/acrylic woven composite laminates: application to low velocity impact10.1016/j.compstruct.2018.05.137 ↗
23. In‐situ polymerizable thermoplastic and bio‐epoxy based composites for offshore renewable energy applications10.1002/pc.28737 ↗
24. Effect of aging temperature on a thermoset-like novel acrylic thermoplastic composite for marine vessels10.1177/0021998321996780 ↗
25. A study of the mechanical behaviour of a glass fibre reinforced polyamide 6,6: Experimental investigation10.1016/j.polymertesting.2006.03.008 ↗
26. Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam10.1016/j.polymer.2017.10.039 ↗
27. Recycling process of a basalt fiber-epoxy laminate by solvolysis: mechanical and optical tests10.3390/fib10060055 ↗
28. Partially pyrolyzed composites with basalt fibres – mechanical properties at laboratory and elevated temperatures10.1016/j.compositesa.2009.08.002 ↗
29. Recycling glass fiber thermoplastic composites from wind turbine blades10.1016/j.jclepro.2018.10.286 ↗
30. 4D-XCT monitoring of void formation in thick methacrylic composites produced by infusion10.1016/j.actamat.2024.120449 ↗
31. D.R. Lide, 2007. CRC Handbook of Chemistry and Physics 88TH Edition. CRC Press, Taylor & Francis, Boca Raton, FL 2007, p. 3-358.
32. Densities, Coefficients of thermal expansion, and Compressibilities of Amorphous Polymers
33. K.K. Chawla, Composite Materials: Science and Engineering, Cham: Springer International Publishing, 2019, https://doi.org/10.1007/978-3-030-28983-6.10.1007/978-3-030-28983-6 ↗
34. G. Finnveden, J. Potting, Life Cycle Assessment, in: Encyclopedia of Toxicology (Third Edition), P. Wexler, Ed., Oxford: Academic Press, 2014, pp. 74–77. https://doi.org/10.1016/B978-0-12-386454-3.00627-8.10.1016/B978-0-12-386454-3.00627-8 ↗
35. Sustainability of alternative reinforcement for concrete structures: Life cycle assessment of basalt FRP bars10.1016/j.conbuildmat.2022.127424 ↗
36. C. Cao, Sustainability and life assessment of high strength natural fibre composites in construction, in: Advanced High Strength Natural Fibre Composites in Construction, M. Fan and F. Fu, Eds., Woodhead Publishing, 2017, pp. 529–544. .10.1016/B978-0-08-100411-1.00021-2 ↗
37. Data quality and uncertainty assessment of life cycle inventory data for composites10.1016/j.compositesb.2024.112021 ↗
38. Carbon footprint assessment of hydrogen and steel10.3390/en15249468 ↗
39. Assessing the environmental Impact of metal production processes10.1016/j.jclepro.2006.06.018 ↗
40. Life cycle assessment (LCA) of non-metallic reinforcement for reinforcing concrete: manufacturing, durability, dismantling, recycling and reuse: a review10.1617/s11527-023-02211-y ↗
41. Bio-based versus traditional polymer composites a life cycle assessment perspective10.1016/j.jclepro.2014.03.017 ↗
42. ScienceDirect Topics, Cradle-to-Gate Assessment - an overview, https://www.sciencedirect.com/topics/engineering/cradle-to-gate-assessment. Accessed: July 17, 2025.
43. Envalior, https://www.envalior.com/en-us/insights/blog/delivering-on-the-transparency-of-the-product-carbon-footprint-of-engineering-plastics.html. Accessed: June 27, 2025.
44. Slideblast. https://slideblast.com/life-cycle-assessment-of-caprolactam-production-from-nylon-6-carpet-_599417ac1723dd1f9296e281.html. Accessed: June 27, 2025.
45. Environmental impact of carbon fibers fabricated by an innovative manufacturing process on life cycle greenhouse gas emissions
46. M. Janssen, E. Gustafsson, L. Echardt, J. Wallinder, J. Wolf, Life cycle assessment of lignin-based carbon fibres, in: 14th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), Dubrovnik, Croatia, Oct. 2019.
47. Developments and industrial applications of basalt fibre reinforced composite materials10.3390/jcs6120367 ↗
48. Environmental impact analysis of the production of flax fibres to be used as composite material reinforcement10.1166/jbmb.2011.1116 ↗
49. Reducing global warming potential impact of bio-based composites based of LCA10.3390/fib10090079 ↗
50. Arkema, -2021 Annual and Sustainable Performance Report. https://e-brochure.arkema.com/media/annual-report-arkema-eng-2021/article/C1/ Accessed: July 18, 2025.
51. ISO. Plastics - Determination of tensile properties., ISO-527-4, 2020.
52. Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
53. Composite Materials Handbook – 17 (CMH-17), Polymer Matrix Composites: Guidelines for Characterization of Structural Materials, Vol. 1, SAE International, 2022.
54. C. C. Chamis, J. H. Sinclair, 10° off-axis tensile test for intralaminar shear characterization of fiber composites, NASA Technical Note, Nasa TN D-8215, april 1976.
55. Shear characterization of unidirectional composites with the off-axis tension test10.1007/BF02319962 ↗
56. Toward the modelling of laminated veneer lumber stiffness and the influence of the number of plies10.1007/s00226-024-01558-x ↗
57. Multi-scale mechanical behavior of liquid elium® based thermoplastic matrix composites reinforced with different fiber types: insights from fiber–matrix adhesion interactions10.1007/s12221-024-00781-4 ↗
58. Experimental and analytical investigation on resin impregnation behavior in continuous carbon fiber reinforced thermoplastic polyimide composites10.1186/s40759-018-0039-3 ↗
59. V. Klinkmüller, R. Kästel, L. Ye, K. Friedrich, On Impregnation Quality and Resulting Mechanical Properties of Compression Moulded Commingled Yarn Based Thermoplastic Composites, in: IUTAM Symposium on Microstructure-Property Interactions in Composite Materials, R. Pyrz, Ed., Dordrecht: Springer Netherlands, 1995, pp. 189–201. https://doi.org/10.1007/978-94-011-0059-5_16.10.1007/978-94-011-0059-5_16 ↗
60. Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite10.1016/j.compositesa.2013.03.018 ↗
61. A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites10.1016/j.compstruct.2016.10.037 ↗
62. R. Sadler, R. Panduranga, Feasibility Study of Endo- and Exo-skeletal Framed Structures with Envelopes for LTA Platforms. In: Defense Technical Information Center, Fort Belvoir, VA, Feb. 2011. https://doi.org/10.21236/ADA547119.10.21236/ADA547119 ↗
63. Numerical and experimental investigation of flexural properties and damage behavior of CFRTP/Al laminates with different stacking sequence10.3390/app13031667 ↗
64. P. Olivier, P. Marguerès, B. Mascaro, K. E. Tarsha Kurdi, F. Collombet, Assessment of the effects of voids on some physical, mechanical and damage mechanics properties of carbon/polymeric composites. 12th European Conference On Composite Materials, Aug 2006, Biarritz, France. hal-04496787.
65. Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates10.1016/j.compstruct.2009.05.010 ↗
66. Fabrication and flatwise compression property of glass fiber-reinforced polypropylene corrugated sandwich panel10.1142/S1758825117501101 ↗
67. Mechanical properties of a unidirectional basalt-fiber/epoxy composite10.3390/jcs4030101 ↗
68. Comparative performance of kevlar, glass and basalt epoxy- and elium-based composites under static-, low- and high-velocity loading scenarios—introduction to an effective recyclable and eco-friendly composite10.3390/polym16111494 ↗