The effect of pH agents on corrosion and low cycle fatigue behaviors of 316L stainless steel in boron-free small modular reactor environments

1. Water chemistry of nuclear power reactors. Evaluation of specifications for water quality, in: IAEA-TECDOC-356

2. Evaluation of the boron dilution method for moderator temperature coefficient measurements10.13182/NT02-A3329 ↗

3. Kritsky · 1999

4. The effect of potassium hydroxide primary water chemistry on the IASCC behavior of 304 stainless steel10.1016/j.jnucmat.2021.153323 ↗

5. On load-following operations of small modular reactors10.1016/j.pnucene.2024.105274 ↗

6. Review of the requirements for load following of small modular reactors10.3390/en15176327 ↗

7. Small modular reactors

8. A. Miskimova, Water chemistry management for future large experimental facilities, M.S. thesis, Lappeenranta University of Technology, Lappeenranta, Finland, 2015.

9. Environmental effect on fatigue strength of stainless steel in PWR primary water: Relation between fatigue life in air and environment10.1111/ffe.14228 ↗

10. Performance Testing of Additively Manufactured 316L Stainless Steel in Light Water Reactor Environment

11. A review of stress corrosion cracking of austenitic stainless steels in PWR primary water10.1016/j.jnucmat.2023.154815 ↗

12. Stress corrosion cracking of 316L stainless steel additively manufactured with sinter-based material extrusion10.3390/ma16114006 ↗

13. Corrosion fatigue and microstructural characterisation of Type 316 austenitic stainless steels tested in PWR primary water10.1016/j.corsci.2017.10.022 ↗

14. Fatigue life prediction of 316 stainless steel in simulated PWR primary water by time domain analysis based on short fatigue crack growth behavior10.1299/mej.17-00035 ↗

15. Low-cycle fatigue behaviors of 316L austenitic stainless steels with different surface finishing in simulated pressurized water reactor primary water and an oxygenated, borated, lithiated high temperature water10.1016/j.corsci.2021.109709 ↗

16. Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water10.1016/j.corsci.2017.06.019 ↗

17. Short communication: “effect of dissolved hydrogen on the early corrosion behavior of 316 stainless steel in simulated PWR environments10.1016/j.jnucmat.2024.154907 ↗

18. Characterization of oxide layers formed on type 316 stainless steel exposed to the simulated PWR primary water environment with varying dissolved hydrogen and zinc concentrations10.1016/j.jnucmat.2021.153193 ↗

19. Insights into the stress corrosion cracking propagation behavior of Alloy 690 and 316 L stainless steel in KOH versus LiOH oxygenated water10.1016/j.corsci.2023.111556 ↗

20. Chemistry and corrosion research and development for the water cooling circuits of European DEMO10.1016/j.fusengdes.2018.12.095 ↗

21. H.-S. Shim, S.-H. Jeon, D.H. Hur, Corrosion and Release Behaviors of Stainless Steel 316L in Boron-Free Primary Coolant, in: Transactions of the Korean Nuclear Society Autumn Meeting, Gyeongju, Republic of Korea, 2023.

22. U.S. Nuclear Regulatory Commission (USNRC), Guidelines for Evaluating the Effects of Light-Water Reactor Water Environments in Fatigue Analysis of Metal Components, Regulatory Guide 1.207, Revision 1, (2018) Washington, DC, USA.

23. H.B. Lee, H.-S. Kim, J. Chen, C. Jang, T.S. Kim, G.L. Stevens, K. Ahluwalia, Environmentally‑assisted fatigue behavior of 316 stainless steels in simulated PWR primary environment: strain holding, Zn‑Addition, and their combined effect, in: Proceedings of the ASME 2019 Pressure Vessels & Piping Conference (PVP2019), San Antonio, TX, USA, July 14–19, 2019, Paper No. PVP2019‑93134, ASME, 2019, 10 pp. https://doi.org/10.1115/PVP2019-93134.10.1115/PVP2019-93134 ↗

24. Effect of zinc on the environmentally-assisted fatigue behavior of 316 stainless steels in simulated PWR primary environment10.1016/j.corsci.2019.02.012 ↗

25. Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment10.1016/j.net.2018.10.007 ↗

26. Low cycle fatigue behavior of hot-bent 347 stainless steel in a simulated PWR water environment10.1007/s12206-016-1012-x ↗

27. Effects of mixed strain rates on low cycle fatigue behaviors of austenitic stainless steels in a simulated PWR environment10.1016/j.ijfatigue.2015.06.021 ↗

28. Low cycle fatigue behavior of alloy 690 in simulated PWR water—Effects of dynamic strain aging and hydrogen10.1016/j.msea.2014.05.069 ↗

29. Low-cycle fatigue behaviors of two heats of SA508 Gr.1a low alloy steel in 310°C air and deoxygenated water—Effects of dynamic strain aging and microstructures10.1016/j.msea.2013.05.049 ↗

30. Fatigue crack growth behaviors of SA508 Gr.3 Cl.2 base and weld material in 290℃ water environment10.14773/cst.2012.11.4.120 ↗

31. Ionization constants of aqueous ammonia from 25 to 250 °C and to 2000 bar10.1007/BF00650397 ↗

32. ASTM E606/E606M‑21, Standard Test Method for Strain‑Controlled Fatigue Testing, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428‑2959, USA, 2021. https://doi.org/10.1520/E0606_E0606M-21.10.1520/E0606_E0606M-21 ↗

33. Environmental fatigue of metallic materials in nuclear power plants – A Review of Korean test programs10.5516/NET.07.2013.040 ↗

34. A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis10.1016/j.micron.2007.12.003 ↗

35. The effect of zinc addition on corrosion behavior of stainless steels with different phases in simulated PWR primary water10.1016/j.corsci.2022.110810 ↗

36. Corrosion behavior of stainless steels in simulated PWR primary water: The effect of composition and matrix phases10.1016/j.corsci.2020.108991 ↗

37. The mechanism of high temperature aqueous corrosion of stainless steels10.1016/0010-938X(91)90125-9 ↗

38. Improving the oxidation resistance of 316L stainless steel in simulated pressurized water reactor primary water by electropolishing treatment10.1016/j.jnucmat.2015.09.029 ↗

39. Composition, structure and properties of the oxide films formed on the stainless steel 316L in a primary type PWR environment10.1016/S0010-938X(97)00158-3 ↗

40. Characterization of interfacial reactions and oxide films on 316L stainless steel in various simulated PWR primary water environments10.1016/j.jnucmat.2017.03.029 ↗

41. Intergranular oxidation of 316L stainless steel in the PWR primary water environment10.1016/j.corsci.2017.06.023 ↗

42. A. Herbelin, T. Couvant, L. Legras, D. Delafosse, G. Ilbevare, Oxidation of austenitic stainless steels in PWR primary water, in: European Corrosion Congress 2009 (EUROCORR 2009), Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA, 2010: pp. 1592–1608.

43. Effects of grain size on tensile property and fracture morphology of 316L stainless steel10.1016/j.matlet.2019.07.058 ↗

44. Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels10.1016/j.actamat.2004.05.003 ↗

45. Effect of dynamic strain aging on hardness in the heat-affected zone of SUS316 steel welds

46. Ivanchenko, M., Yagodzinskyy, Y., Ehrnstén, U., Karlsen, W., & Hänninen, H. (2009). Manifestations of DSA in austenitic stainless steels and Inconel alloys (1-2013). In S. Vuori & R. Rintamaa (Eds.), 20th International Conference on Structural Mechanics in Reactor Technology, SMiRT 20: Book of Abstracts (Vol. 1, pp. 57–59). VTT Technical Research Centre of Finland.

47. Low cycle fatigue behaviour in vacuum of a 316L-type austenitic stainless steel between 20 and 600°C—Part II: dislocation structure evolution and correlation with cyclic behaviour10.1016/S0921-5093(96)10560-8 ↗

48. Segregation-dislocation self-organized structures ductilize a work-hardened medium entropy alloy10.1038/s41467-025-56710-3 ↗

49. The effect of dynamic strain aging on fatigue property for 316L stainless steel10.1557/jmr.2016.49 ↗

50. Dynamic mechanical response of biomedical 316L stainless steel as function of strain rate and temperature10.1155/2011/173782 ↗

51. High-temperature low cycle fatigue, creep–fatigue and thermomechanical fatigue of steels and their welds10.1016/j.ijmecsci.2005.08.004 ↗

52. Temperature effect on the low-cycle fatigue behavior of type 316L stainless steel: cyclic non-stabilization and an invariable fatigue parameter10.1016/j.msea.2006.12.035 ↗

53. Mechanism of dynamic strain aging and characterization of its effect on the low-cycle fatigue behavior in type 316L stainless steel10.1016/j.jnucmat.2004.12.012 ↗

54. Effects of dissolved hydrogen on low-cycle fatigue behaviors and hydrogen uptake of 316LN austenitic stainless steel in simulated pressurized water reactor primary water10.1016/j.ijfatigue.2019.105457 ↗

55. The role of dynamic strain-ageing in the environment assisted cracking observed in pressure vessel steels10.1111/j.1460-2695.1997.tb00396.x ↗

56. Environmental fatigue evaluation in PLM activities of PWR plant

57. Development of an environmental fatigue evaluation method for nuclear power plants in JSME code10.1299/jee.6.452 ↗

58. Environmental fatigue correction factor model for domestic nuclear-grade low-alloy steel10.1016/j.net.2021.02.014 ↗

59. Influence of mean stress and light water reactor environment on fatigue life and dislocation microstructures of 316L austenitic steel10.1016/j.jnucmat.2018.05.064 ↗

60. Effect of light water reactor water environments on the fatigue life of reactor materials10.1115/1.4035885 ↗

61. Low cycle fatigue behavior of directed energy deposited 316L stainless steel in air and pressurized water reactor environment10.1016/j.engfailanal.2025.109527 ↗

62. Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials10.1016/j.actamat.2009.05.012 ↗

63. Hydrogen-induced intergranular fracture of steels10.1016/S0013-7944(00)00124-7 ↗

64. Low cycle fatigue behaviors of type 316LN austenitic stainless steel in 310 °C deaerated water–fatigue life and dislocation structure development10.1016/j.msea.2007.07.023 ↗

65. Fatigue life and crack growth mechanisms of the type 316LN austenitic stainless steel in 310°C deoxygenated water10.1080/18811248.2007.9711340 ↗

66. Effects of oxide on fatigue crack growth behaviour of type 347 stainless steel in PWR water conditions10.1111/ffe.12290 ↗

67. Electrochemical and spectroscopic characterization of oxide films formed on Alloy 182 in simulated boiling water reactor environment: Effect of dissolved hydrogen10.1016/j.corsci.2018.01.024 ↗

68. The passivity of AISI 316L stainless steel in 0.05 M H2SO410.1007/s10800-009-0016-y ↗

69. EIS study of passivation of austenitic and duplex stainless steels reinforcements in simulated pore solutions10.1016/j.cemconcomp.2006.01.012 ↗

70. Comprehending the role of individual microstructural features on electrochemical response and passive film behaviour in type 304 austenitic stainless steel10.1016/j.corsci.2020.109187 ↗

71. Uniformity of passive films formed on ferrite and martensite by different inorganic inhibitors10.1016/S0010-938X(01)00178-0 ↗

72. Corrosion and passive behavior of AlxCrFeNi3−x (x = 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment10.1016/j.corsci.2022.110666 ↗

73. Hydrogen in 316 steel — diffusion, permeation and surface reaction10.1016/0022-3115(88)90319-4 ↗

74. P.L. Andresen and P. Chou, SCC initiation and growth in PWR primary water containing KOH vs. LiOH, in: Proc. 19th Int. Conf. Environ. Degrad. Mater. Nucl. Power Syst.—Water Reactors (EDM 2019), 2019, pp. 363–372.