journal article·2020-08Open access

A time- and temperature-dependent viscoelastic model based on the statistical compatibility condition

A. Álvarez-Vázquez, A. Fernández-Canteli, E. Castillo, F. Pelayo, M. Muñiz-Calvente, M.J. Lamela

Materials & Design· Volume 193

Abstract

This paper presents a novel methodology to characterize viscoelastic materials, allowing the limitations of current conventional models based on Time-Temperature-Superposition (TTS) principle to be avoided. It implies the definition of the temperature-time field, T-t, from short-term recorded relaxation curves at different temperatures by establishing the compatibility condition between the temperature dependent relaxation modulus at given time, E(T; t), and the time dependent relaxation modulus for a given temperature, E(t; T). The solution of the resulting functional equation allows the T-t field to be analytically defined by assuming the normalized relaxation function to be a stochastic model properly identified as a survival cumulative distribution function of certain statistical families such as normal or Gumbel ones. As a result, the corresponding master curves in the T-t field for both E-t and E-T functions are directly derived over the whole range of time and temperature, preventing user's influence on the definition of the classical shift factors and the minimum overlapping requirement over time on the short-term curves. The suitability of the proposed methodology is confirmed by its application to the experimental results from a campaign of relaxation tests on commercial PVB (polyvinyl butyral) at different temperatures.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Probabilistic and Robust Engineering Design · Structural Analysis of Composite Materials · Polymer Science and PVC

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Direct experimental evidence of time-temperature superposition at finite strain for an amorphous polymer network10.1016/j.polymer.2014.12.045 ↗
2. Viscoelastic bistable behaviour of antisymmetric laminated composite shells with time-temperature dependent properties10.1016/j.tws.2017.10.036 ↗
3. Superposition-based predictions of creep for polymer films at cryogenic temperatures10.1016/j.cryogenics.2019.102979 ↗
4. A viscoelastic constitutive relation for the rate-dependent mechanical behavior of rubber-like elastomers based on thermodynamic theory
5. Astrom · 1997
6. Marques · 2012
7. Christensen · 1982
8. Drozdov · 1998
9. Mechanical properties of substances of high molecular weight. vi. dispersion in concentrated polymer solutions and its dependence on temperature and concentration10.1021/ja01164a117 ↗
10. Rheology of polyisobutylene. ii. low molecular weight polymers10.1002/pol.1954.120147306 ↗
11. Elastoviscous properties of polyisobutylene. V. the transition region10.1002/pol.1952.120080512 ↗
12. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
13. Findley · 1976
14. Ferry · 1980
15. The effect of temperature and pressure on the mechanical properties of thermo- and/or piezorheologically simple polymeric materials in thermodynamic equilibrium – a critical review10.1023/A:1014421519100 ↗
16. A note on estimating mastercurves10.1007/BF00396677 ↗
17. Applicability of the time–temperature superposition principle in modeling dynamic response of a polyurea10.1007/s11043-008-9048-7 ↗
18. The sensitivity of the time-temperature shift process to thermal variations–a note10.1007/s11043-008-9055-8 ↗
19. Second-order statistical bootstrap for the uncertainty quantification of time-temperature-superposition analysis10.1007/s00397-019-01138-y ↗
20. Automated procedure for generation of creep compliance master curve for asphalt mixtures10.3141/1630-04 ↗
21. Analytical-numerical procedure to determine if a set of experimental curves can be superimposed to form a master curve10.1295/polymj.26.981 ↗
22. New method for estimating shift factors in time–temperature superposition models10.1007/s10973-013-3193-1 ↗
23. The closed form t-T-P shifting (CFS) algorithm10.1122/1.3503529 ↗
24. 2017
25. Geometric interpretation of time-temperature superposition
26. Application of geometric algorithm of time-temperature superposition to linear viscoelasticity of rubber compounds10.1007/s13367-011-0011-9 ↗
27. Determination of relaxation modulus of time-dependent materials using neural networks10.1007/s11043-016-9332-x ↗
28. Thermorheologically simple materials: a bayesian framework for model calibration and validation10.1016/j.jsv.2017.05.005 ↗
29. A novel approach to describe the time-temperature conversion among relaxation curves of viscoelastic materials
30. On scientific laws without dimensional constants10.1016/0022-247X(86)90162-9 ↗
31. Castillo · 2004
32. Linear viscoelastic materials with environmental dependent properties
33. Schwarzl · 1990
34. Münstedt · 2014
35. Castillo · 2009
36. Arnold · 1999
37. Castillo · 2004