journal article·2020-11Open access

Energy absorption of cast metal and composite foams tested in extremely low and high-temperatures

Paweł Kaczyński, Mariusz Ptak, Katarzyna Gawdzińska

Materials & Design· Volume 196

Abstract

This article presents a quasi-static and dynamic study of the energy absorption of aluminium and composite foams by investigating four types of cast foams produced by different technologies: foaming in liquid state, casting metal around granule and gas foaming and continuous rolling. Aluminium alloys were the base material. The main intention of the article is to present the results confirming the possibility of using aluminium-based foams in the liquefied natural gas tanks. For this reason, the main goal of the research was to evaluate the energy absorption and structural stability at sub-zero as well as extremely high temperatures. The low temperature of liquefied methane (−163 °C) was particularly important because low temperatures can reduce the strength of aluminium foams, which decreases their durability and influence the overall structural safety. The combustibility of aluminium foams and composite foams was also tested. The composite foam named 445, manufactured by the authors, underwent a combustibility test and retained its original dimensions, while other foams were partially melted. The advantageous durability at extremely low (−175 °C) and high (750 °C) temperatures suggest that such materials can significantly increase the safety and durability of liquefied natural gas tanks against fire, quasi-static and impact loading.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Polymer Foaming and Composites · Nuclear and radioactivity studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Manufacturing the future: The next era of global growth and innovation
2. businessinsider.com, Million Metal Foam Market Analysis
3. García-Moreno · 2016 · 9 · 85
4. Light-metal foams-history of innovation and technological challenges10.1002/adem.201200217 ↗
5. Manufacture, characterisation and application of cellular metals and metal foams10.1016/S0079-6425(00)00002-5 ↗
6. Mazurkiewicz · 2014 · 49
7. Experimental and numerical analyses on the dynamic response of aluminum foam core sandwich panels subjected to localized air blast loading10.1016/j.marstruc.2019.02.005 ↗
8. Czarnecka-Komorowska · 2020 · 13 · 2255
9. Processing and characterization of in-situ TiB2 stabilized closed cell aluminium alloy composite foams10.1016/j.matdes.2016.03.153 ↗
10. Composite metal foams processed through powder metallurgy10.1016/j.matdes.2007.01.026 ↗
11. Aluminum foam for automotive applications10.1002/(SICI)1527-2648(200004)2:4<200::AID-ADEM200>3.0.CO;2-2 ↗
12. Thermophysical properties of high porosity metal foams10.1016/S0017-9310(01)00220-4 ↗
13. ALPORAS aluminum foam: production process, properties, and applications10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G ↗
14. Sereni · 2001 · 4986
15. In situ inorganic foams prepared from various clays at low temperature10.1016/j.clay.2010.10.016 ↗
16. Heat transfer enhancement of high temperature thermal energy storage using metal foams and expanded graphite10.1016/j.solmat.2010.09.032 ↗
17. Compressive mechanical properties of low-cost, aluminium matrix syntactic foams10.1016/j.compositesa.2020.105923 ↗
18. Ballistic performance of composite metal foam against large caliber threats10.1016/j.compstruct.2019.111032 ↗
19. Selected aspects of the control of the human body motion in the vehicle subjected to the blast load
20. Lehmhus · 2020 · 13 · 2566
21. Duarte · 2019 · 9 · 531
22. Axial crush performance of polymer-aluminium alloy hybrid foam filled tubes10.1016/j.tws.2019.01.040 ↗
23. J. Liu, Q. Qu, Y. Liu, R. Li, B.L.-J. of A. and Compounds, undefined 2016, Compressive properties of Al-Si-SiC composite foams at elevated temperatures, Elsevier. (n.d.). https://www.sciencedirect.com/science/article/pii/S0925838816306466 (accessed March 30, 2020).
24. The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes10.1016/j.compstruct.2017.08.034 ↗
25. Zhu
26. Thermal conductivity of open cell aluminum foam and its application as advanced thermal storage unit at low temperature10.1016/S1875-5372(18)30118-8 ↗
27. Radiation heat transfer in high porosity open-cell metal foams for cryogenic applications10.1016/j.applthermaleng.2016.03.081 ↗
28. Cooling capacity of high porosity open-cell metal foams as passive cryogenic radiators10.1016/j.cryogenics.2017.04.005 ↗
29. Application of instance-based learning for cast iron casting defects prediction
30. The evaluation of surface integrity during machining of Inconel 718 with various laser assistance strategies10.1051/matecconf/201713601006 ↗
31. Experimental research of surface roughness and surface texture after laser cladding10.1016/j.apsusc.2015.12.093 ↗
32. Experimental and numerical investigations on laser-welded corrugated-core sandwich panels subjected to air blast loading10.1016/j.marstruc.2014.11.007 ↗
33. Decision support system in the field of defects assessment in the metal matrix composites castings10.3390/ma13163552 ↗
34. Banhart
35. Method of producing structural elements from foamed metals
36. Macro and micro collapse mechanisms of closed-cell aluminium foams during quasi-static compression10.1016/j.matdes.2017.01.011 ↗
37. High-energy impact testing of agglomerated cork at extremely low and high temperatures10.1016/j.ijimpeng.2018.12.001 ↗
38. Assessing impact velocity and temperature effects on crashworthiness properties of cork material10.1016/j.ijimpeng.2017.04.014 ↗
39. Experimental study on the dynamic behaviour of aluminium foam sandwich plates under single and repeated impacts at low temperature10.1016/j.ijimpeng.2017.12.001 ↗
40. Mechanical properties of A356 and ZA27 metallic syntactic foams at cryogenic temperature10.1016/j.jallcom.2019.152181 ↗
41. Compressive behaviour of aluminium matrix syntactic foams reinforced by iron hollow spheres10.1016/j.matdes.2015.06.011 ↗
42. Compressive properties of aluminum matrix syntactic foams prepared by stir casting method10.1002/adem.201900183 ↗
43. Polymer infused composite metal foam as a potential aircraft leading edge material10.1016/j.apsusc.2019.144114 ↗
44. A Study of Metal-Ceramic Composite Foams Combustibility10.12693/APhysPolA.135.304 ↗