Preparation and characterization of hollow Fe2O3 ultra-fine fibers by centrifugal spinning
Source abstract
Abstract
Abstract In this paper, the hollow Fe2O3 ultra-fine fibers were successfully prepared by the centrifugal spinning followed by the calcination process. Several spinning parameters including the concentration of FeCl3, rotational speed and diameter of spinneret were discussed for determination of optimum spinning condition. The resultant as-spun fibers and hollow Fe2O3 ultra-fine fibers were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), FT-IR spectra and X-ray photoelectron spectroscopy (XPS). The results showed that the diameters of the as-spun fibers and the hollow Fe2O3 ultra-fine fibers were 1.0–6.0 μm and 0.5–5.0 μm, respectively. The concentration of FeCl3 had an impact on as-spun fibers hardly, but on diameters of the hollow Fe2O3 ultra-fine fibers. The diameters of the as-spun fibers become smaller and the hollow Fe2O3 ultra-fine fibers become more fragile when the rotational speed increased or the inner diameter of the spinneret decreased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Cellulose Research Studies · Electromagnetic wave absorption materials · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Hydrothermal synthesis and visible-light photocatalytic activity of novel cage-like ferric oxide hollow spheres10.1021/cg800941d ↗
2. Alpha-Fe2O3 nanoflakes as an anode material for Li-ion batteries10.1002/adfm.200601186 ↗
3. Facile synthesis and characterization of iron oxide semiconductor nanowires for gas sensing application10.1021/jp803869e ↗
4. Formation mechanism of Fe2O3 hollow fibers by direct annealing of the electrospun composite fibers and their magnetic electrochemical properties10.1039/c0ce00379d ↗
5. Facile fabrication of long α-Fe2O3, α-Fe and γ-Fe2O3 hollow fibers using sol-gel combined co-electrospinning technology10.1016/j.jcis.2006.12.026 ↗
6. Synthesis and characterization of hollow Fe3O4 nanoparticles10.1002/anie.200700677 ↗
7. Synthesis of uniform hollow oxide nanoparticles through nanoscale acid etching10.1021/nl8019467 ↗
8. Ligand-assisted hydrothermal synthesis of hollow Fe2O3 urchin-like microstructures and their magnetic properties10.1021/jp8019599 ↗
9. Microstructures and photoactivity of mesoporous anatase hollow microspheres fabricated by fluoride-mediated self-transformation10.1016/j.jcat.2007.03.032 ↗
10. A generalized synthesis of metal oxide hollow spheres using a hydrothermal approach10.1021/cm052768u ↗
11. Hydrothermal synthesis and visible-light photocatalytic activity of α-Fe2O3/TiO2 composite hollow microspheres10.1016/j.ceramint.2013.04.040 ↗
12. Preparation and characterization of magnetic α-Fe2O3 nanofibers coated with uniform layers of silica10.1016/j.ceramint.2013.11.036 ↗
13. Continuous hollow alpha-Fe2O3 and alpha-Fe fibers prepared by the sol-gel method10.1039/b201243j ↗
14. Template synthesis of hollow metal oxide fibers with hierarchical architecture10.1021/cm0609911 ↗
15. Facile fabrication of long alpha-Fe2O3, alpha-Fe and gamma-Fe2O3 hollow fibers using sol-gel combined co-electrospinning technology10.1016/j.jcis.2006.12.026 ↗
16. Controllable synthesis of porous alpha-Fe2O3 microtube and tube-in-tube by non-coaxial electrospinning10.1246/cl.130167 ↗
17. Parameter study and characterization for polyacrylonitrile nanofibers fabricated via centrifugal spinning process10.1016/j.eurpolymj.2013.09.017 ↗
18. Centrifugal jet spinning for highly efficient and large-scale fabrication of barium titanate nanofibers10.1016/j.matlet.2013.11.103 ↗
19. Centrifugal spinning: an alternative approach to fabricate nanofibers at high speed and low cost10.1080/15583724.2014.935858 ↗