journal article·2017-11

Investigation of the hydrogen states in magnesium alloys and their effects on mechanical properties

Xuan Liu, Siqi Yin, Qing Lan, Jilai Xue, Qichi Le, Zhiqiang Zhang

Materials & Design· Volume 134
Publisher page

Abstract

Abstract This work investigates the hydrogen states and their corresponding effects on the mechanical properties of several kinds of magnesium alloys. Magnesium alloys can have tens to near hundreds microgram/gram of hydrogen, depending on the alloying element species and additions. Pure Mg has a hydrogen content of 12.7 μg/g. Al and Zn have a limited influence on hydrogen content, and the addition of rare earth elements Y, Gd and Nd significantly increases the hydrogen content to as high as 95 μg/g. Excess hydrogen causes highly alloyed magnesium alloys to suffer from gas porosity problems and deterioration of mechanical properties. The mechanical properties of as-cast AZ91-0.4Ca alloy can be promoted after the removal of hydrogen. The ultimate strength can be improved from 95 MPa to 150 MPa. The rare earth containing magnesium alloys are less likely to suffer gas porosity because excess hydrogen is incorporated into the cuboid-shaped rare earth hydrides. Additional hydride particles can form around the grain boundaries of the Mg-RE alloys during the homogenization. The formed hydrides should be mainly due to the strong hydrogen bonding by the rare earth atoms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Microstructures, mechanical properties and corrosion behaviors of Mg–Y–Zn–Zr alloys with specific Y/Zn mole ratios10.1016/j.jallcom.2014.10.177 ↗
2. Effects of phase composition and content on the microstructures and mechanical properties of high strength Mg–Y–Zn–Zr alloys10.1016/j.matdes.2015.09.087 ↗
3. Effects of Zn/Gd ratio on the microstructures and mechanical properties of Mg-Zn-Gd-Zr alloys10.1016/j.msea.2017.03.117 ↗
4. Microstructures and tensile properties of hot extruded Mg–5Li–3Al–2Zn–xRE(Rare Earths) alloys10.1016/j.matdes.2013.08.077 ↗
5. The effects of microalloying on the precipitate microstructure at grain boundary regions in an Mg-Zn-based alloy10.1016/j.matdes.2017.01.073 ↗
6. Corrosion of magnesium alloy AZ31: the influence of bicarbonate, sulphate, hydrogen phosphate and dihydrogen phosphate ions in saline solution10.1016/j.corsci.2014.05.006 ↗
7. Corrosion of Mg-9Al alloy with minor alloying elements (Mn, Nd, Ca, Y and Sn)10.1016/j.matdes.2017.05.048 ↗
8. Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: the influence of porosity10.1016/j.jallcom.2016.11.146 ↗
9. Microstructure and mechanical properties of a novel Mg–RE–Zn–Y alloy fabricated by rheo-squeeze casting10.1016/j.matdes.2016.01.063 ↗
10. Microstructures and mechanical properties of high performance Mg–6Gd–3Y–2Nd–0.4 Zr alloy by indirect extrusion and aging treatment10.1016/j.msea.2014.06.043 ↗
11. Effects of casting process on microstructures and flow stress behavior of Mg–9Gd–3Y–1.5Zn–0.8Zr semi-continuous casting billets10.1016/j.jma.2014.11.007 ↗
12. Preparation of large scale magnesium alloy billets by LFEC processing
13. Degassing of magnesium alloy by rotating impeller degasser: part 1 – mathematical modelling10.1179/174328407X161312 ↗
14. Influence of hydrogen levels on porosity and mechanical properties of Mg alloy castings10.1179/136404608X361756 ↗
15. Degassing of magnesium alloy by rotating impeller degasser part 2 – effect on microstructure and mechanical properties10.1179/174328409X443173 ↗
16. Variation of hydrogen level in magnesium alloy melt
17. The role of ultrasound in hydrogen removal and microstructure refinement by ultrasonic argon degassing process10.1016/j.ultsonch.2017.03.041 ↗
18. Study on hydrogen removal of AZ91 alloys using ultrasonic argon degassing process10.1016/j.ultsonch.2014.12.015 ↗
19. Microporosity in magnesium alloy castings
20. H-Mg (hydrogen-magnesium)10.1361/105497101770332893 ↗
21. Numerical simulation of porosity for Al based alloys10.1016/j.proeng.2017.02.250 ↗
22. Effect of process parameters on microstructure and properties of AM50A magnesium alloy parts formed by double control forming10.1016/S1003-6326(14)63064-8 ↗
23. Characterization the role of squeezing pressure on microstructure, tensile properties and failure mode of a new Mg-6Zn-4Al-0.5Cu magnesium alloy10.1016/j.jallcom.2017.05.115 ↗
24. Microstructure and mechanical properties of rheo-squeeze casting AZ91-Ca magnesium alloy prepared by gas bubbling process10.1016/j.matdes.2014.10.087 ↗
25. Interdependence of hydrogen and microporosity in magnesium alloy AZ91
26. The H-Mg (hydrogen-magnesium) system10.1007/BF02893152 ↗
27. Failure behavior of high pressure die casting AZ91D magnesium alloy10.1016/j.msea.2016.07.009 ↗
28. Liang · 1993
29. Thermodynamic analysis of effects of rare earth in Mg alloys solutions
30. Liakishev · 1996
31. Hydrogen absorption in Mg-Gd alloy10.1016/j.ijhydene.2017.04.012 ↗
32. Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloy10.1016/j.jallcom.2006.03.015 ↗
33. Behavior of Mg–15Gd–5Y–0.5Zr alloy during solution heat treatment from 500 to 540°C10.1016/j.msea.2007.01.057 ↗
34. Effects of heat treatments on microstructure and mechanical properties of Mg–11Y–5Gd–2Zn–0.5Zr (wt.%) alloy10.1016/j.jallcom.2010.09.194 ↗
35. Microstructure evolution of Mg-9Gd-2Er-0.4Zr alloy during solid solution treatment10.1016/S1003-6326(13)62504-2 ↗
36. Microstructural characterisation of as cast and homogenised Mg-Gd-Nd-Zr alloys10.1179/174328408X275991 ↗
37. Hydrogenation behavior of Mg85Zn6Y9 crystalline alloy with long period stacking ordered structure10.1016/j.ijhydene.2015.07.103 ↗