Superior fracture toughness with high yield strength in a high-Mn steel induced by heterogeneous grain structure
Source abstract
Abstract
Heterogeneous grain structures were designed in a high Mn steel (Fe28Mn10Al1.00C), and the tensile properties and fracture toughness were investigated and compared with those for homogeneous structures. The heterogeneous grain structures display larger tensile ductility, stronger strain hardening and higher fracture toughness at the similar yield strength level. Hetero-deformation-induced hardening is found to play an important role in the heterogeneous grain structures, resulting in better mechanical properties. The size of plastic zone and the strain hardening capacity around the crack tip for the heterogeneous grain structures are found to be much larger/higher than those for the homogeneous grain structures at the same level of yield strength, resulting in better fracture toughness. High density of geometrically necessary dislocations and grain refinement are induced at the adjacent area of the main crack path, and numerous microvoids are also observed besides the main crack for the heterogeneous grain structures, resulting in more energy dissipation for higher fracture toughness. The deformation mechanisms around the crack tip are highly dependent on the magnitude of plastic strain and the grain size. The observed higher fracture toughness in the heterogeneous grain structures can be partly attributed to the formation of microbands.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Microstructural change in austenitic Fe-30.0wt%Mn-7.8wt%Al-1.3wt%C initiated by spinodal decomposition and its influence on mechanical properties10.1016/S1359-6454(97)00201-2 ↗
2. A synchrotron look at steel10.1126/science.1078210 ↗
3. Microstructures and mechanical properties of high strength Fe-Mn-Al-C light-weight TRIPLEX steels10.1002/srin.200606440 ↗
4. Current state of Fe-Mn-Al-C low density steels10.1016/j.pmatsci.2017.05.002 ↗
5. High dislocation density-induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
6. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel10.1016/j.actamat.2017.08.049 ↗
7. Ultrastrong steel via minimal lattice misfit high density nanoprecipitation10.1038/nature22032 ↗
8. Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation10.1126/sciadv.aba9543 ↗
9. Making ultrastrong steel tough by grain-boundary delamination10.1126/science.aba9413 ↗
10. Ultrastrong low-carbon nanosteel produced by heterostructure and interstitial mediated warm rolling10.1126/sciadv.aba8169 ↗
11. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
12. Twinning-induced plasticity (TWIP) steels10.1016/j.actamat.2017.06.046 ↗
13. Effect of the anisotropy of martensitic transformation on ferrite deformation in Dual-Phase steels10.1016/j.matdes.2022.110805 ↗
14. Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging10.1016/j.actamat.2010.10.002 ↗
15. A high-performance TRIP steel enhanced by ultrafine grains and hardening precipitates10.1016/j.matdes.2017.04.063 ↗
16. A new review on transformation induced plasticity (TRIP)10.1016/S0749-6419(99)00078-9 ↗
17. Microband-induced plasticity in a high Mn-Al-C light steel10.1016/j.msea.2008.05.042 ↗
18. Factors influencing the tensile behavior of a Fe-28Mn-9Al-0.8C steel10.1016/j.msea.2008.12.055 ↗
19. Microbanding mechanism in an Fe-Mn-C high-Mn twinning-induced plasticity steel10.1016/j.scriptamat.2013.03.010 ↗
20. Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels10.1016/j.scriptamat.2012.08.038 ↗
21. Microstructure evolution and age-hardening behavior of microalloyed austenitic Fe-30Mn-9Al-0.9C light-weight steels10.1007/s11661-017-4265-9 ↗
22. An overview of the effects of alloying elements on the properties of lightweight Fe-(15–35) Mn-(5–12) Al-(0.3-1.2) C steel10.1007/s11837-018-2837-9 ↗
23. Investigations of the microstructure evolution and tensile deformation behavior of austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition10.1016/j.actamat.2018.01.051 ↗
24. Tensile behaviors and strain hardening mechanisms in a high-Mn steel with heterogeneous microstructure10.3390/ma15103542 ↗
25. Deformation mechanisms for a new medium-Mn steel with 1.1 GPa yield strength and 50% uniform elongation10.1016/j.jmst.2022.05.048 ↗
26. Tensile deformation of low density duplex Fe–Mn–Al–C steel10.1016/j.matdes.2015.03.043 ↗
27. Microstructures, mechanical properties and deformation of near-rapidly solidified low-density Fe-20Mn-9Al-1.2C-xCr steels10.1016/j.matdes.2019.108307 ↗
28. Effects of carbon and molybdenum on the nanostructural evolution and strength/ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloys
29. Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy10.1016/j.msea.2021.141803 ↗
30. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
31. High tensile ductility and strength in bulk nanostructured nickel10.1002/adma.200800214 ↗
32. Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel10.1016/j.msea.2011.01.052 ↗
33. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
34. On the fracture toughness of advanced materials10.1002/adma.200803322 ↗
35. Enhanced fracture toughness and strength in bulk nanocrystalline Cu with nanoscale twin bundles10.1016/j.actamat.2009.08.048 ↗
36. The conflicts between strength and toughness10.1038/nmat3115 ↗
37. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
38. The importance of fracture toughness in ultrafine and nanocrystalline bulk materials10.1080/21663831.2016.1166403 ↗
39. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
40. Crack propagation mechanisms of AISI 4340 steels with different strength and toughness10.1016/j.msea.2018.05.056 ↗
41. Fracture behavior of heterogeneous nanostructured 316L austenitic stainless steel with nanotwin bundles10.1016/j.actamat.2018.02.065 ↗
42. On the exceptional damage-tolerance of gradient metallic materials10.1016/j.mattod.2019.09.023 ↗
43. On the impact toughness of gradient-structured metals10.1016/j.actamat.2020.04.027 ↗
44. Extraordinary fracture toughness in nickel induced by heterogeneous grain structure10.1016/j.msea.2021.142313 ↗
45. ASTM E1820-15, Standard Test Method for Measurement of Fracture Toughness, ASTM International, West Conshohocken, PA, 2015, www.astm.org.
46. Effects of microstructure and notches on the mechanical properties of dual-phase steels10.1016/S1044-5803(99)00044-3 ↗
47. Fracture toughness of high-alloy austenitic-martensitic TRIP steels after Q&P processing10.1007/s10704-018-0332-5 ↗
48. Fracture Toughness of an Advanced Ultrahigh-strength TRIP-aided Steel10.2355/isijinternational.54.955 ↗
49. Fracture toughness of type 304 and 316 stainless steels and their welds10.1179/imr.1997.42.2.45 ↗
50. Fracture toughness of candidate materials for ITER first wall, blanket, and shield structures10.1016/0022-3115(94)90101-5 ↗
51. Fracture toughness of a high carbon and high silicon steel10.1016/S0921-5093(00)01272-7 ↗
52. Influence of ageing on the quasistatic fracture toughness of an SS 316(N) weld at ambient and elevated temperatures10.1016/j.jnucmat.2010.11.001 ↗
53. Enhancing fracture toughness of nanotwinned austenitic steel by thermal annealing10.1016/j.scriptamat.2016.03.024 ↗