Magnetostrictive bulk Fe-Ga alloys prepared by selective laser melting for biodegradable implant applications
Source abstract
Abstract
Magnetostrictive Fe-Ga alloys have received extensive attention for their good mechanical properties and low saturation magnetization. However, the magnetostriction of bulk polycrystalline Fe-Ga alloys always suffers a major setback due to random grain orientation. In this study, selective laser melting (SLM) was used for the first time to manufacture bulk polycrystalline Fe81Ga19 alloys, and different scanning paths were determined for revealing the influences on grain orientation and magnetostrictive properties. The results showed that elongated columnar grains formed in the building direction due to the epitaxial growth during SLM. For zigzag scanning, grain orientation was parallel to the building direction while tilted by ∼17° for unidirectional scanning. And annular scanning resulted in mixed grain orientations in the alloys. Moreover, Fe81Ga19 alloy with zigzag scanning exhibited 〈1 0 0〉 preferred grain orientation. Consequently, the saturated magnetostriction of bulk Fe81Ga19 alloy with zigzag scanning reached ∼77.2 ppm, representing 23.9% and 25.1% increments compared with unidirectional and annular scanning, respectively. The Fe81Ga19 alloy with zigzag scanning also presented an ultimate compressive strength of 448.6 MPa and a degradation rate of 0.09 mm/y, as well as favorable biocompatibility. These results indicated that SLM might be a potential method for manufacturing magnetostrictive bulk Fe-Ga alloys for implant applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Study of Galfenol direct cytotoxicity and remote microactuation in cells10.1016/j.biomaterials.2017.05.049 ↗
2. Control of cellular adhesion and myofibroblastic character with sub-micrometer magnetoelastic vibrations10.1016/j.jbiomech.2018.02.007 ↗
3. H. Chen, X. Liang, N. Sun, N. Sun, H. Lin, Y. Gao, An Ultra-Compact ME Antenna Design for Implantable Wireless Communication, 2020 IEEE International Symposium on Antennas and Propagation and North American Radio Science Meeting, IEEE, 2020, pp. 655-656.10.1109/IEEECONF35879.2020.9329973 ↗
4. Directly printed embedded metal mesh for flexible transparent electrode via liquid substrate Electric-Field-Driven jet10.1002/advs.202105331 ↗
5. Magnetic-driven wireless electrical stimulation in a scaffold10.1016/j.compositesb.2022.109864 ↗
6. Magnetostrictive actuation of a bone loading composite for accelerated tissue formation
7. Magnetoelectric 3D scaffolds for enhanced bone cell proliferation10.1016/j.apmt.2019.06.004 ↗
8. A conductive network enhances nerve cell response
9. 3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration10.1007/s42242-019-00056-5 ↗
10. I. Romaniuc, Development of a magnetostrictive vibromotor, 6th WSEAS International Conference, 2013.
11. Recrystallization behavior and magnetostriction under pre-compressive stress of Fe–Ga–B sheets10.1016/j.intermet.2012.02.019 ↗
12. Research on microstructure and magnetostriction of Fe83Ga17Dyx alloys10.1016/S1002-0721(10)60388-2 ↗
13. Tuning magnetostriction of Fe–Ga alloys via stress engineering10.1016/j.jallcom.2020.153687 ↗
14. In vitro corrosion properties and cytocompatibility of Fe-Ga alloys as potential biodegradable metallic materials10.1016/j.msec.2016.09.086 ↗
15. Multiscale influence of trace Tb addition on the magnetostriction and ductility of 〈100〉 oriented directionally solidified Fe-Ga crystals
16. Magnetostriction of ternary Fe–Ga–X alloys (X= Ni, Mo, Sn, Al)10.1063/1.1452220 ↗
17. Effects of the ternary element (C, B) additions on phase constitution and magnetostriction of Fe83Ga17 alloys
18. Magnetostriction of ternary Fe–Ga–x (x= C, V, Cr, Mn Co, Rh) alloys10.1063/1.2670376 ↗
19. Tailoring magnetostriction with various directions for directional solidification Fe82Ga15Al3 alloy by magnetic field heat treatment10.1063/1.5003218 ↗
20. Influences of growth rate on microstructures and magnetostrictive properties of Fe83Ga17 directional solidification alloys10.1080/14786435.2020.1861357 ↗
21. Effect of initial oriented columnar grains on the texture evolution and magnetostriction in Fe–Ga rolled sheets10.3390/met7020036 ↗
22. Development of strong η fiber recrystallization texture in rolled Fe81Ga19 thin sheet10.1007/s11661-013-1832-6 ↗
23. Influences of rare earth element Ce-doping and melt-spinning on microstructure and magnetostriction of Fe83Ga17 alloy10.1016/j.jallcom.2015.03.009 ↗
24. Effect of microstructure on the magnetostriction properties of Fe81Ga19-xAlx alloys obtained by melt spinning10.1016/j.materresbull.2021.111559 ↗
25. Structure, magnetostriction, and magnetic properties of melt-spun Fe–Ga alloys10.1063/1.2197031 ↗
26. Magnetostriction of〈100〉 oriented Fe-Ga rods with large diameter10.1007/s12598-013-0127-9 ↗
27. Water-responsive shape memory thermoplastic polyurethane scaffolds triggered at body temperature for bone defect repair10.1039/D1QM01635K ↗
28. Transcrystalline growth of PLLA on carbon fiber grafted with nano-SiO2 towards boosting interfacial bonding in bone scaffold10.1186/s40824-021-00248-0 ↗
29. Microstructure, mechanical properties and corrosion performance of selective laser melting Ti/GNPs composite with a porous structure10.1007/s11771-021-4767-x ↗
30. 3D printed high performance silver mesh for transparent glass heaters through liquid sacrificial substrate Electric-Field-Driven jet10.1002/smll.202107811 ↗
31. In Situ Growth of a Metal-Organic Framework on Graphene Oxide for the Chemo-Photothermal Therapy of Bacterial Infection in Bone Repair10.1021/acsami.2c04841 ↗
32. Selective laser melted near-beta titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe: Microstructure and mechanical properties10.1007/s11771-021-4720-z ↗
33. Tailorable microstructure and mechanical properties of selective laser melted TiB/Ti–6Al–4V composite by heat treatment10.1016/j.apmate.2021.10.001 ↗
34. A study of the microstructural evolution during selective laser melting of Ti–6Al–4V10.1016/j.actamat.2010.02.004 ↗
35. Effect of scanning strategy on grain structure and crystallographic texture of Inconel 718 processed by selective laser melting10.1016/j.jmst.2018.02.002 ↗
36. Sr2+ sustained release system augments bioactivity of polymer scaffold10.1021/acsapm.2c00024 ↗
37. In situ grown rare earth lanthanum on carbon nanofibre for interfacial reinforcement in Zn implants10.1080/17452759.2022.2053929 ↗
38. Bioprinting and in vitro characterization of alginate dialdehyde–gelatin hydrogel bio-ink10.1007/s42242-020-00058-8 ↗
39. Silver-decorated black phosphorus: a synergistic antibacterial strategy10.1088/1361-6528/ac5aee ↗
40. Apatite formation on organic monolayers in simulated body environment10.1002/(SICI)1097-4636(200004)50:1<16::AID-JBM3>3.0.CO;2-G ↗
41. S. Zhang, Q.S. Wei, G.K. Lin, X. Zhao, Y.S. Shi, Effects of powder characteristics on selective laser melting of 316L stainless steel powder, Advanced Materials Research, Trans Tech Publ, 2011, pp. 3664-3667.10.4028/www.scientific.net/AMR.189-193.3664 ↗
42. Influence mechanism of scanning strategy on surface quality of SLM forming Inconel 718
43. Optimization of laser energy density and scanning strategy on the forming quality of 24CrNiMo low alloy steel manufactured by SLM10.1016/j.matchar.2020.110718 ↗
44. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
45. The heat treatment influence on the microstructure and hardness of TC4 titanium alloy manufactured via selective laser melting10.3390/ma11081318 ↗
46. Magnetostriction enhancement by high magnetic field annealing in cast Fe81Ga19 alloy10.1016/j.jmmm.2017.06.095 ↗
47. Evidence for lattice softening of the Fe-Ga magnetostrictive alloy: stress-induced local martensites10.1016/j.matdes.2017.11.036 ↗
48. The Fe–Ga phase diagram: revisited10.1016/j.jallcom.2020.156486 ↗
49. Influence of annealing process on texture evolution and magnetostriction in rolled Fe–Ga based alloys10.1016/j.jmmm.2014.03.011 ↗
50. Selective laser melting of gas atomized Al–3.02 Mg–0.2 Sc–0.1 Zr alloy powder: Microstructure and mechanical properties10.1002/adem.201800650 ↗
51. Effect of crystallographic orientation on mechanical anisotropy of selective laser melted Ti-6Al-4V alloy10.1016/j.matchar.2017.01.014 ↗
52. Bio-functional and anti-corrosive 3D printing 316L stainless steel fabricated by selective laser melting10.1016/j.matdes.2018.04.058 ↗
53. Giant enhancement of magnetostrictive response in directionally-solidified Fe83Ga17Erx compounds10.3390/ma11061039 ↗
54. Depth-dependent decomposition and property of large magnetostriction Fe-Ga alloys10.1016/j.apsusc.2021.151059 ↗
55. Effect of solidification texture on the magnetostrictive behavior of galfenol10.1007/s11661-013-2022-2 ↗
56. Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites10.1016/j.jallcom.2012.06.097 ↗
57. Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties10.1016/j.msea.2015.12.101 ↗
58. Research status and development trend of magnetostrictive Fe-Ga alloys
59. Progress in the study of novel magnetostrictive Fe-Ga alloys
60. Nitrogen-doped carbon-ZnO heterojunction derived from ZIF-8: A photocatalytic antibacterial strategy for scaffold10.1016/j.mtnano.2022.100210 ↗
61. Dilemma and breakthrough of biodegradable poly-l-lactic acid in bone tissue repair10.1016/j.jmrt.2022.01.164 ↗
62. Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial10.1007/s10856-010-4070-0 ↗
63. Biocompatibility of pure iron: in vitro assessment of degradation kinetics and cytotoxicity on endothelial cells10.1016/j.msec.2008.12.019 ↗
64. J.V. Uchoa Teixeira, F.R. Azevedo Maia, M. Carvalho, R. Reis, J.M. Oliveira, P.N. Lisboa-Filho, A.P. Rosifni Alves Claro, Synthesis of mussel-inspired polydopamine-gallium nanoparticles for biomedical applications, Nanomedicine 16(1) (2020) 5-17.10.2217/nnm-2020-0312 ↗
65. Gallium loading into a polydopamine-functionalised SrTiO3 nanotube with combined osteoinductive and antimicrobial activities10.1016/j.ceramint.2019.07.240 ↗