journal article·2015-12

Preparation and characterization of porous metakaolin-based inorganic polymer spheres as an adsorbent

Qing Tang, Yuan-yuan Ge, Kai-tuo Wang, Yan He, Xue-min Cui

Materials & Design· Volume 88
Publisher page

Abstract

Abstract This paper describes a simple and effective process for fabricating porous metakaolin-based inorganic polymer spheres. The process for making porous geopolymer spheres (PGS) by a suspension and solidification method was experimentally established, and the following conditions yielded the optimal compositions: n(SiO2)/n(Na2O) = 1.6 in a sodium silicate solution, n(Na2O)/n(Al2O3) = 1, n(H2O)/n(Na2O) = 16, sodium dodecyl sulfate (K12) foaming agent = 1.5 mass%. This procedure was based on the rapid solidification mechanism of a geopolymer paste in a high-temperature suspension. Pore structure analysis of the geopolymer spheres revealed that the pore size distribution centered mainly at 15 nm, which indicated the presence of a large BET surface area (53.95 m2/g) of a mostly mesoporous nature. The bulk density of the spheres was 0.79 g/cm3, and their total porosity was 60.30%; these results indicated the availability of numerous active sites for binding with Cu2 +, Pb2 +, Ca2 + and other ions. The results showed that porous geopolymer spheres are a low-cost, convenient, and environment-friendly adsorbent for removing metal ions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Chemical Synthesis and Characterization · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
2. Interface microstructure and compressive behavior of fly ash/phosphate geopolymer hollow sphere structures10.1016/j.matdes.2014.09.063 ↗
3. The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer10.1016/j.chemosphere.2010.02.018 ↗
4. Reduction of metal leaching in brown coal fly ash using geopolymers10.1016/j.jhazmat.2004.06.034 ↗
5. A comparative study of kaolinite versus metakaolinite in fly ash based geopolymers containing immobilized metals10.1080/00986440490277974 ↗
6. Geopolymer based catalysts-new group of catalytic materials10.1016/j.cattod.2010.09.008 ↗
7. Fly ash-based geopolymer as a novel photocatalyst for degradation of dye from wastewater10.1016/j.partic.2012.10.007 ↗
8. NaA zeolite synthesis from geopolymer precursor10.1557/mrc.2011.15 ↗
9. Preparation of self-supporting NaA zeolite membranes using geopolymers10.1016/j.memsci.2013.07.027 ↗
10. Do geopolymers actually contain nanocrystalline zeolites? A reexamination of existing results10.1021/cm050230i ↗
11. The heavy metal adsorption characteristics on metakaolin-based geopolymer10.1016/j.clay.2011.11.027 ↗
12. Fly ash-based geopolymer for Pb removal from aqueous solution10.1016/j.jhazmat.2011.01.133 ↗
13. Environmental, physical and structural characterization of geopolymer matrixes synthesized from coal (co-) combustion fly ashes10.1016/j.jhazmat.2007.10.008 ↗
14. Porous geopolymeric spheres for removal of Cu(II) from aqueous solution: synthesis and evaluation10.1016/j.jhazmat.2014.09.038 ↗
15. Fabrication of metallic composite foam using ceramic porous spheres “Light Expanded Clay Aggregate” via casting process10.1016/j.matdes.2014.07.061 ↗
16. Effects of particle clustering on the tensile properties and failure mechanisms of hollow spheres filled syntactic foams: a numerical investigation by microstructure based modeling10.1016/j.matdes.2012.12.004 ↗
17. Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology10.1007/s10853-009-3497-5 ↗
18. Hot-pressure forming process of PVC/geopolymer composite materials10.1016/j.clay.2012.10.015 ↗
19. Effect of curing temperature on geopolymerisation of metakaolin-based geopolymers10.1016/j.clay.2014.06.024 ↗
20. Kinetics and thermodynamics of cadmium and lead ions adsorption on NiO nanoparticles10.1016/j.cej.2012.02.080 ↗
21. Adsorption of lead and cadmium ions from aqueous solution to the montmorillonite/water interface10.1016/S0927-7757(99)00501-4 ↗
22. Adsorption of heavy metal cations by Na-clinoptilolite: equilibrium and selectivity studies10.1016/j.jenvman.2014.02.007 ↗
23. Adsorption studies of lead on lateritic minerals from aqueous media10.1081/SS-120000792 ↗
24. Alginate-graphene oxide hybrid gel beads: an efficient copper adsorbent material10.1016/j.jcis.2013.01.051 ↗
25. Equilibrium and kinetic studies in adsorption of heavy metals using biosorbent: a summary of recent studies10.1016/j.jhazmat.2008.06.042 ↗