journal article·2025-11Open access

Ultralight Pt-ALD-modified graphene aerogel achieving aluminum-class thermal resistance at 12% mass

Jiho Kang, Viet Phuong Nguyen, Seung-Mo Lee, Duckjong Kim

Materials & Design· Volume 259

Abstract

Graphene aerogels (GAs), a class of three-dimensional porous structures, are limited by a fundamental challenge: low thermal conductivity stemming from high interfacial resistance between constituent layers and structural defects. This study systematically investigates a strategy to enhance thermal transport properties by engineering the interlayer bonding via platinum atomic layer deposition (Pt-ALD) and compares it with conventional high-temperature annealing (1873 K). The Pt-ALD-modified graphene aerogel (GA-ALD) exhibited a 199 % increase in thermal conductivity, significantly surpassing the 113 % enhancement from heat treatment. SEM, Raman, XRD, XPS, and FTIR data explicitly indicate that Pt-ALD forms covalent Pt O C bonds that bridge adjacent graphene layers while preserving the original porous morphology. Owing to the synergistic effect of enhanced solid-phase thermal conductivity and efficient convective heat transfer through the preserved porous structure, the GA-ALD sample achieved a total thermal resistance comparable to that of an equal-sized aluminum heat sink under identical forced-convection conditions, while weighing only ∼12 % of its aluminum counterpart. Moreover, cyclic compressive tests confirmed GA-ALD durability, retaining 99.5 % height and 94.7 % stress after 1000 cycles. These findings demonstrate that interfacial bond engineering via ALD is a powerful route to ultralight, high-performance carbon aerogels for weight-sensitive thermal-management applications.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Graphene research and applications · Thermal properties of materials · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Thermal management and temperature uniformity enhancement of electronic devices by micro heat sinks: a review10.1016/j.energy.2020.119223 ↗
2. Thermal management on IGBT power electronic devices and modules10.1109/ACCESS.2018.2793300 ↗
3. Ultralow thermal conductivity in graphene-silica porous ceramics with a special saucer structure of graphene aerogels10.1039/C8TA10426C ↗
4. Graphene-based hybrid aerogels for energy and environmental applications10.1016/j.cej.2021.129700 ↗
5. Recent advances on lightweight aerogel as a porous receiver layer for solar thermal technology application10.1016/j.solmat.2021.111131 ↗
6. Graphene foam-embedded epoxy composites with significant thermal conductivity enhancement10.1039/C9NR03968F ↗
7. Multiscale structural modulation of anisotropic graphene framework for polymer composites achieving highly efficient thermal energy management10.1002/advs.202003734 ↗
8. Vertically aligned high-quality graphene foams for anisotropically conductive polymer composites with ultrahigh through-plane thermal conductivities10.1021/acsami.8b04230 ↗
9. Multi-walled carbon nanotube and carbon nanofiber/ polyacrylonitrile aerogel scaffolds for enhanced epoxy resins10.1016/j.compositesb.2019.107299 ↗
10. Stiff and electrically conductive composites of carbon nanotube aerogels and polymers10.1039/b905735h ↗
11. Ultratough nacre-inspired epoxy-graphene composites with shape memory properties10.1039/C8TA10725D ↗
12. Ultra‐tough inverse artificial nacre based on epoxy‐graphene by freeze‐casting10.1002/ange.201902410 ↗
13. Effects of heat treatment on the thermal properties of highly nanoporous graphene aerogels using the infrared microscopy technique10.1016/j.ijheatmasstransfer.2014.04.023 ↗
14. Free-standing graphene aerogel with improved through-plane thermal conductivity after being annealed at high temperature10.1016/j.jcis.2021.10.134 ↗
15. Healing defective CVD-graphene through vapor phase treatment10.1039/C4NR00775A ↗
16. Drastically increased electrical and thermal conductivities of Pt-infiltrated MXenes10.1039/D1TA00331C ↗
17. Tuning the thermal conductivity of the amorphous PAA polymer via vapor-phase infiltration10.1021/acsomega.1c04233 ↗
18. Enhanced thermoelectric performance of defect engineered monolayer graphene10.1088/1361-6528/ac4aa6 ↗
19. Paved phonon transport route in graphene by vapor phase process10.1016/j.ijthermalsci.2018.07.040 ↗
20. Recovery of thermal transport in atomic-layer-deposition-healed defective graphene10.1016/j.carbon.2021.04.098 ↗
21. Nonequilibrium phonon thermal resistance at MoS2/oxide and graphene/oxide interfaces10.1021/acsami.2c02062 ↗
22. Freeze-casting mold-based scalable synthesis of directional graphene aerogels with long-range pore alignment for energy applications
23. Surface chemistry during atomic layer deposition of Pt studied with vibrational sum-frequency generation10.1021/acs.jpcc.1c06947 ↗
24. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
25. An angstrom-level d-spacing control of graphite oxide using organofillers for high-rate lithium storage10.1016/j.chempr.2022.05.002 ↗
26. A robust and conductive metal-impregnated graphene oxide membrane selectively separating organic vapors10.1039/C4CC08896D ↗
27. Growth of high-purity and high-quality turbostratic graphene with different interlayer spacings10.1021/acsomega.2c06834 ↗
28. Effect of covalent functionalization on thermal transport across graphene-polymer interfaces10.1021/acs.jpcc.5b02920 ↗
29. Enhancing the interfacial thermal conduction of the graphene sheets via chemical bond-bond connections
30. Effects of chemical bonding on heat transport across interfaces10.1038/nmat3303 ↗
31. Three dimensional graphene aerogels and their electrically conductive composites10.1016/j.carbon.2014.05.063 ↗
32. Reduction of interfacial thermal resistance of overlapped graphene by bonding carbon chains
33. Enhanced mechanical, thermal, and electric properties of graphene aerogels via supercritical ethanol drying and high-Temperature thermal reduction
34. Influence of ZnO/graphene nanolaminate periodicity on their structural and mechanical properties10.1016/j.jmst.2018.03.022 ↗
35. Role of graphene in enhancing the mechanical properties of TiO2/graphene heterostructures10.1039/C7NR03049E ↗
36. Synthesis and characterization of highly crystalline graphene aerogels10.1021/nn505335u ↗
37. H. Jo, D. Kim, Forced convection heat transfer inside graphene aerogel. Int. Commun. Heat Mass Transf. 2023;149. doi: 10.1016/j.icheatmasstransfer.2023.107110.10.1016/j.icheatmasstransfer.2023.107110 ↗
38. Reducing vehicle weight and improving U.S. energy efficiency using integrated computational materials engineering10.1007/s11837-012-0424-z ↗
39. Weight optimization of a cooling system composed of fan and extruded-fin heat sink10.1109/TIA.2014.2336977 ↗