journal article·2021-02Open access

Temperature-dependent deformation processes in two-phase TiAl + Ti3Al nano-polycrystalline alloys

Pengtao Li, Y.Q. Yang, Vladimir Koval, Jianxin Chen, Xian Luo, Wen Zhang, Bowen Wang, Haixue Yan

Materials & Design· Volume 199

Abstract

Although deformation processes in single-phase nano-polycrystalline alloys at different temperatures are well described, the deformation mechanism in two-phase nano-polycrystalline alloys at different temperatures is still unclear. Here, the deformation behaviour of the two-phase TiAl+Ti3Al nano-polycrystalline alloys is investigated at different temperatures by molecular dynamic simulation. For a comprehensive understanding of the processes, mechanical properties of the single-phase TiAl and Ti3Al nano-polycrystalline alloys are explored as well. The results of numerical simulations indicate that temperature has a strong influence on the deformation mechanism of the alloys. When temperature is below 800 K, the critical grain size (~8.3 nm) becomes a dominant factor controlling the deformation process in the single-phase TiAl. In the two-phase TiAl+Ti3Al nano-polycrystalline alloys, the motion of dislocations in the TiAl phase with the grain size smaller than the critical size dominates the deformation process. On the other hand, no obvious phenomena linked with the critical size occur in the Ti3Al phase. Once the strain exceeds 18.0%, the dislocation emission is observed in the Ti3Al grains. At high temperatures (≥800 K), in the two-phase nano-polycrystalline alloy, the deformation mechanism changes from the plastic deformation to the boundary slip and recrystallization.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
2. Hot deformation processing capability of Fe-contained high Nb TiAl-based alloy10.1016/j.vacuum.2018.10.075 ↗
3. Crystal plasticity analysis of deformation anisotropy of lamellar TiAl alloy: 3D microstructure-based modelling and in-situ micro-compression10.1016/j.ijplas.2019.04.012 ↗
4. Experimental study and numerical simulation of dynamic recrystallization behavior of TiAl-based alloy10.1016/j.matdes.2017.02.088 ↗
5. Koch · 2006
6. Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee issue—selected topics in materials science and engineering: past, present and future, edited by S. Suresh10.1016/j.actamat.2003.08.032 ↗
7. Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems10.1016/S0079-6425(98)00005-X ↗
8. Nanocrystalline metals crystallized from amorphous solids: nanocrystallization, structure, and properties10.1016/0927-796X(95)00187-5 ↗
9. The deformation and ageing of mild steel: III discussion of results10.1088/0370-1301/64/9/303 ↗
10. Formation and characteristics of nano-crystalline TiAl10.2320/matertrans1989.36.982 ↗
11. Microscopic plastic response in a bulk nano-structured TiAl intermetallic compound processed by high-pressure torsion10.1016/j.msea.2017.12.065 ↗
12. Cyclic deformation and microstructure evolution of high Nb containing TiAl alloy during high temperature low cycle fatigue10.1016/j.ijfatigue.2017.02.019 ↗
13. Deformation behavior of high Nb containing TiAl based alloy in α + γ two phase field region10.1016/j.matdes.2015.10.080 ↗
14. Atomic-scale understanding of the γ/α2 interface in a TiAl alloy10.1016/j.jallcom.2020.156381 ↗
15. Plasticity-induced restructuring of a nanocrystalline grain boundary network10.1016/j.actamat.2016.08.040 ↗
16. On the ultimate tensile strength of tantalum10.1016/j.actamat.2016.12.033 ↗
17. Dislocation nucleation facilitated by atomic segregation10.1038/nmat5034 ↗
18. Molecular dynamics investigation of deformation twinning in γ-TiAl sheared along the pseudo-twinning direction10.1016/j.actamat.2007.11.007 ↗
19. Micro-mechanism of the effect of grain size and temperature on the mechanical properties of polycrystalline TiAl10.1016/j.commatsci.2018.10.019 ↗
20. Molecular dynamic simulation of nanocrystal formation and tensile deformation of TiAl alloy10.1039/C7RA10010H ↗
21. Microstructures of rapidly-solidified binary TiAl alloys10.1016/0956-7151(90)90208-X ↗
22. Microstructure and nanohardness of Ti-48% Al alloy prepared by rapid solidification under different cooling rates10.1016/S1003-6326(11)61600-2 ↗
23. γ-Phase transformation, dynamic recrystallization and texture of a forged TiAl-based alloy based on plane strain compression at elevated temperature10.1016/j.matdes.2015.11.120 ↗
24. Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression10.1016/j.matchar.2014.09.013 ↗
25. Hot deformation behavior and dynamic recrystallization of a β-solidifying TiAl alloy10.1016/j.msea.2015.11.097 ↗
26. Recent progress in the simulation of microstructure evolution in titanium alloys
27. Molecular dynamics simulation of nanocrystal formation and deformation behavior of Ti3Al alloy10.1016/j.commatsci.2014.10.012 ↗
28. Quantitative parameter-free prediction of simulated crystal-nucleation times10.1103/PhysRevLett.96.245701 ↗
29. Submicrometer-scale molecular dynamics simulation of nucleation and solidification from undercooled melt: linkage between empirical interpretation and atomistic nature10.1016/j.actamat.2015.12.033 ↗
30. Extracting dislocations and non-dislocation crystal defects from atomistic simulation data10.1088/0965-0393/18/8/085001 ↗
31. Automated identification and indexing of dislocations in crystal interfaces10.1088/0965-0393/20/8/085007 ↗
32. Systematic analysis of local atomic structure combined with 3D computer graphics10.1016/0927-0256(94)90109-0 ↗
33. Structural characterization of deformed crystals by analysis of common atomic neighborhood10.1016/j.cpc.2007.05.018 ↗
34. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
35. Crystallographic aspects of deformation twinning and consequences for plastic deformation processes in γ-TiAl10.1016/S1359-6454(99)00385-7 ↗
36. Microstructure evolution of TiAl matrix in the process of magnetron sputtering and hot isostatic pressing for fabricating TiAl/SiCf composites10.1016/j.intermet.2013.03.010 ↗
37. Atomsk: a tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
38. Mechanical properties of monocrystalline and polycrystalline monolayer black phosphorus10.1088/1361-6528/28/4/045702 ↗
39. Plasticity without dislocations in a polycrystalline intermetallic10.1038/s41467-019-11505-1 ↗
40. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
41. Interatomic potentials for atomistic simulations of the Ti-Al system10.1103/PhysRevB.68.024102 ↗
42. Alloy models with the embedded-atom method10.1103/PhysRevB.39.12554 ↗
43. Understanding the atomistic deformation mechanisms of polycrystalline γ-TiAl under nanoindentation: effect of lamellar structure10.1016/j.jallcom.2020.154443 ↗
44. Effects of γ/γ interfaces in TiAl lamellae subjected to uniaxial tensile loading10.1016/j.commatsci.2019.109361 ↗
45. A new strain-rate-induced deformation mechanism of Cu nanowire: transition from dislocation nucleation to phase transformation10.1016/j.actamat.2014.11.017 ↗
46. Three-dimensional phase field microelasticity theory of a complex elastically inhomogeneous solid10.1063/1.1486249 ↗
47. Phase field microelasticity theory and modeling of elastically and structurally inhomogeneous solid10.1063/1.1492859 ↗
48. Microstructure and transformation texture evolution during α precipitation in polycrystalline α/β titanium alloys – a simulation study10.1016/j.actamat.2015.04.050 ↗
49. Mesoscale modelling of mobile crystal defects—dislocations, cracks and surface roughening: phase field microelasticity approach10.1080/14786430412331315699 ↗
50. Room temperature mechanical behavior of silicon-doped TiAl alloys with grain sizes in the nano- and submicron-range10.1016/S1359-6454(00)00312-8 ↗
51. Stacking fault based analysis of shear mechanisms at interfaces in lamellar TiAl alloys10.1016/j.actamat.2015.11.047 ↗
52. Molecular dynamics simulations of void growth in γ-TiAl single crystal10.1016/j.commatsci.2013.12.014 ↗
53. Atomic simulations of the effect of twist grain boundaries on deformation behavior of nanocrystalline copper10.1016/j.commatsci.2013.11.052 ↗
54. Elastic and tensile behavior of nanocrystalline copper and palladium10.1016/S1359-6454(97)00092-X ↗
55. Temperature-dependent size effects on the strength of Ta and W micropillars10.1016/j.actamat.2015.10.016 ↗
56. The formation and destruction of stacking fault tetrahedron in fcc metals: a molecular dynamics study10.1016/j.scriptamat.2017.04.019 ↗
57. Atomic-scale dynamic process of deformation-induced stacking fault tetrahedra in gold nanocrystals10.1038/ncomms3340 ↗
58. Novel design concepts for gamma-base titanium aluminide alloys10.1016/S0966-9795(00)00036-4 ↗
59. Observation of planar stacking faults in a Ti-rich two-phase Ti-Al alloy after deformation at elevated temperatures10.1080/095008300176416 ↗
60. Titanium Aluminides
61. Phase equilibria in the Ti–Al binary system10.1016/S1359-6454(00)00118-X ↗
62. Deformation localization and recrystallization in TC4 alloy under impact condition10.1016/j.msea.2004.12.020 ↗
63. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy10.1016/j.intermet.2019.106521 ↗
64. On the formation of temperature-induced defects at the surface of TEM specimens prepared from TiAl using high-energy Gallium and low-energy Argon ions10.1080/14786435.2020.1748245 ↗