Mechanical and tribological behaviour of BaTiO3 nanoparticles reinforced UHMWPE nanocomposite for prospective load-bearing applications
Source abstract
Abstract
Ultra-high molecular weight polyethylene (UHMWPE), extensively utilised in orthopaedic implants, experiences mechanical degradation and suboptimal wear resistance over time, restraining its long-term reliability. Hence, to modify functionality, barium titanate (BaTiO 3 , 0–10 wt%) reinforced UHMWPE nanocomposites were manufactured employing compression molding. Characterisations, including X-ray diffraction (XRD) and scanning electron microscopy (SEM), validated the efficient filler incorporation within the matrix. The incorporation of 5 wt% BaTiO 3 caused enhancement in tensile strength (31%), flexural strength (28%), and impact resistance (40%), attributed to effective nanoparticle dispersion and improved load transfer. The same composite was the most consistent in tribological performance, reducing specific wear rate by 58% in air and 35% in foetal bovine serum compared to UHMWPE and reducing the average friction coefficient by 0.027 and 0.01 in respective environments. The surface wettability assessments highlighted the relative hydrophilicity of the nanocomposites, signifying enhanced interactions with the biological fluids and thus, biocompatibility. Besides, preliminary in vitro cell viability studies confirmed the non-toxic nature and suitability of the nanocomposites for biological applications. Overall, the nanocomposites demonstrated improved functionalities, with the 5 wt% UHMWPE/BaTiO 3 nanocomposite outperforming others by a balanced combination of strength, wear resistance, and biocompatibility, making it a promising candidate for load-bearing orthopedic applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Addressing the needs of the rapidly aging society through the development of multifunctional bioactive coatings for orthopedic applications10.3390/ijms23052786 ↗
2. Hypersensitivity to orthopedic implants: a review of the literature10.1007/s40744-017-0062-6 ↗
3. Progress on Medical Implant: a Review and prospects10.1007/s42235-022-00284-z ↗
4. Surface coating of orthopedic implant to enhance the osseointegration and reduction of bacterial colonization: a review10.1186/s40824-022-00269-3 ↗
5. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
6. Orthopedic implants and devices for bone fractures and defects: past, present and perspective
7. A. Nath, T. Kanjilal, C. Bhattacharjee, Application of Bioactive Composite Green Polymer for the Development of Artificial Organs, in: New Polymeric Composite Materials, Mater. Res. Foundat., 2016: pp. 62–102. doi: 10.21741/9781945291098.10.21741/9781945291098-2 ↗
8. Advanced biomaterials in hip joint arthroplasty. A review on polymer and ceramics composites as alternative bearings10.1016/j.compositesb.2015.07.019 ↗
9. The structural and mechanical properties of the UHMWPE films mixed with the PE-Wax10.3390/ma13153422 ↗
10. Fracture toughness of ultra-high molecular weight polyethylene: a basis for defining the crack-initiation toughness in polymers10.1016/j.jmps.2018.09.022 ↗
11. The effects of proton radiation on UHMWPE material properties for space flight and medical applications10.1016/j.asr.2011.07.009 ↗
12. Effect of pre-heat treatment on the static and dynamic thermo-mechanical properties of ultra-high molecular weight polyethylene10.1016/j.polymertesting.2005.02.007 ↗
13. Nanometer size wear debris generated from ultra high molecular weight polyethylene in vivo10.1016/j.wear.2008.06.005 ↗
14. Properties of crosslinked ultra-high-molecular-weight polyethylene10.1016/S0142-9612(00)00195-2 ↗
15. Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity10.1016/j.actbio.2008.02.022 ↗
16. The combined effects of crosslinking and high crystallinity on the microstructural and mechanical properties of ultra high molecular weight polyethylene10.1016/j.biomaterials.2005.09.033 ↗
17. Gradient crosslinking of UHMWPE using irradiation in molten state for total joint arthroplasty10.1016/S0142-9612(01)00176-4 ↗
18. Osteolysis in Alloarthroplasty of the Hip: the Role of Ultra-High Molecular Weight Polyethylene Wear Particles10.1097/00003086-199009000-00013 ↗
19. Wear behaviour and wear debris characterization of UHMWPE on alumina ceramic, stainless steel, CoCrMo and Ti6Al4V hip prostheses in a hip joint simulator10.4028/www.scientific.net/JBBTE.7.7 ↗
20. Investigation of mechanical properties of UHMWPE composites reinforced with HAP+TiO2fabricated by solvent dispersing technique10.1016/j.jmrt.2022.11.038 ↗
21. The role of fillers to enhance the mechanical, thermal, and wear characteristics of polymer composite materials: a review10.1016/j.compositesa.2023.107775 ↗
22. Physical and mechanical properties of tilapia scale hydroxyapatite-filled high-density polyethylene composites10.3390/polym14020251 ↗
23. Enhanced the antibacterial and mechanical properties of UHMWPE by addition sort fibers of polyacrylonitraile PAN, graphene nanoplate (GNP) and hydroxyapatite (HAP)
24. Advances in the processing of UHMWPE-TiO2 to manufacture medical prostheses via SPIF10.3390/polym11122022 ↗
25. A review on the very high nanofiller-content nanocomposites: their preparation methods and properties with high aspect ratio fillers10.1016/j.progpolymsci.2018.07.006 ↗
26. The reinforcement mechanism of fiber-glass reinforced plastics under wet conditions: a review10.1002/pen.760180211 ↗
27. Clay-reinforced polyamide: preferential orientation of the montmorillonite sheets and the polyamide crystalline lamellae10.1002/polb.1108 ↗
28. Polymer layered silicate nanocomposites10.1002/adma.19960080104 ↗
29. Polymer nanocomposites: from fundamental research to specific applications10.1016/j.msec.2003.09.148 ↗
30. Ultra-high-molecular-weight-polyethylene (UHMWPE) as a promising polymer material for biomedical applications: a concise review10.3390/polym12020323 ↗
31. Mechanical and bio-tribological behaviours of UHMWPE based composites for prosthetic hip joint implant application10.1016/j.triboint.2024.109945 ↗
32. Optimizing tribological, tensile & in-vitro biofunctional properties of UHMWPE based nanocomposites with simultaneous incorporation of graphene nanoplatelets (GNP) & hydroxyapatite (HAp) via a facile approach for biomedical applications10.1016/j.compositesb.2019.107181 ↗
33. Improved wear, mechanical, and biological behavior of UHMWPE-HAp-zirconia hybrid nanocomposites with a prospective application in total hip joint replacement10.1007/s10853-018-3146-y ↗
34. Tribological performance of biomedical grade UHMWPE/nano-Al2O3/Vitamin-C hybrid composite for cartilage replacements10.1016/j.matlet.2021.129515 ↗
35. A Comprehensive Review on Barium Titanate Nanoparticles as a Persuasive Piezoelectric Material for Biomedical applications: prospects and challenges10.1002/smll.202206401 ↗
36. Chitosan-BaTiO3 nanostructured piezopolymer for tissue engineering10.1016/j.colsurfb.2020.111296 ↗
37. Biocompatible evaluation of barium titanate foamed ceramic structures for orthopedic applications10.1002/jbm.a.34879 ↗
38. Antibacterial and Antibiofilm activity of Barium Titanate Nanoparticles10.1016/j.matlet.2018.06.107 ↗
39. Recent strategies to combat infections from biofilm-forming bacteria on orthopaedic implants10.3390/ijms221910243 ↗
40. What’s new in musculoskeletal infection: Update on biofilms10.2106/JBJS.16.00300 ↗
41. The role of microbial biofilms in prosthetic joint infections10.3109/17453674.2014.966290 ↗
42. Biological response to prosthetic debris10.5312/wjo.v6.i2.172 ↗
43. S.B. Goodman, E. Gibon, Z. Yao, The Basic Science of Periprosthetic Osteolysis NIH Public Access, 2013.
44. Materials for hip prostheses: a review of wear and loading considerations10.3390/ma12030495 ↗
45. Friction and wear properties of UHMWPE/Al 2 O 3 ceramic under different lubricating conditions10.1016/S0043-1648(01)00647-0 ↗
46. Experimental comparison on tribological pairs UHMWPE/TIAL6V4 alloy, UHMWPE/AISI316L austenitic stainless and UHMWPE/AL2O3 ceramic, under dry and lubricated conditions10.1016/j.triboint.2015.12.041 ↗
47. Influence of polymer surface chemistry on frictional properties under protein-lubrication conditions: implications for hip-implant design10.1023/A:1009074228662 ↗
48. High density polyethylene composites containing alumina-toughened zirconia particles: mechanical and tribological behavior10.1016/j.compositesb.2021.108892 ↗
49. Single-point incremental forming of two biocompatible polymers: an insight into their thermal and structural properties10.3390/polym10040391 ↗
50. M.K. Bin Bakri, M.R. Rahman, P.L.N. Khui, E. Jayamani, A. Khan, Use of sustainable polymers to make green composites, in: Advances in Sustainable Polymer Composites, Elsevier, 2020: pp. 109–129. doi: 10.1016/B978-0-12-820338-5.00005-9.10.1016/B978-0-12-820338-5.00005-9 ↗
51. N. Saba, M. Jawaid, M.T.H. Sultan, An overview of mechanical and physical testing of composite materials, in: Mechanical and Physical Testing of Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, Elsevier, 2019: pp. 1–12. doi: 10.1016/B978-0-08-102292-4.00001-1.10.1016/B978-0-08-102292-4.00001-1 ↗
52. High Resolution XPS of Organic Polymers: the Scienta ESCA300 Database
53. Synthesis and characterization of multiwalled carbon nanotube reinforced ultra high molecular weight polyethylene composite by electrostatic spraying technique10.1016/j.compositesa.2007.08.004 ↗
54. Structure, mechanical properties and friction behavior of UHMWPE/HDPE/carbon nanofibers10.1016/j.matchemphys.2008.12.016 ↗
55. Graphite nanoplatelets and carbon nanotubes based polyethylene composites: electrical conductivity and morphology10.1016/j.matchemphys.2013.08.008 ↗
56. Three kinds of charcoal powder reinforced ultra-high molecular weight polyethylene composites with excellent mechanical and electrical properties10.1016/j.matdes.2015.06.163 ↗
57. Study on effect of cubic- and tetragonal phased BaTiO3 on the electrical and thermal properties of polymeric nanocomposites10.1016/j.matchemphys.2016.08.052 ↗
58. Investigation on synthesis of tetragonal BaTiO3 nanopowders by a new wet chemical method10.1007/s10854-022-08064-5 ↗
59. Mechanical and thermal properties of graphene oxide/ultrahigh molecular weight polyethylene nanocomposites10.1039/C5RA11826C ↗
60. Wear performance of ultrahigh molecular weight polyethylene/quartz composites10.1016/S0142-9612(02)00610-5 ↗
61. Rheological, mechanical, thermal and electrical properties of UHMWPE/CNC composites10.1007/s10570-021-04227-5 ↗
62. Impact Strength for 3D-printed PA6 Polymer Composites under Temperature changes
63. Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route10.1177/09540083231224608 ↗
64. Nickel Nanoparticle-Filled High-Performance Polymeric Nanocomposites for EMI Shielding applications10.1007/s11664-019-07535-6 ↗
65. High performance polyetherketone-hexagonal boron nitride nanocomposites for electronic applications10.1007/s10854-019-00675-9 ↗
66. Mechanical tailoring of dislocations in ceramics at room temperature: a perspective10.1111/jace.19362 ↗
67. Tribological behaviour of nanodiamond reinforced UHMWPE in water-lubricated contacts10.1016/j.triboint.2017.01.016 ↗
68. Effect of multi-scale fillers on the tribological behavior of UHMWPE composites in water-lubricated contacts10.1016/j.triboint.2024.109669 ↗
69. Some basic aspects of polymer nanocomposites: a critical review10.1016/j.nanoms.2019.02.006 ↗
70. Evaluation of the Mechanical and Radiopacity Properties of Poly(methyl methacrylate)/Barium Titanate-denture Base Composites
71. A predictive model towards understanding the effect of reinforcement agglomeration on the stiffness of nanocomposites10.1177/00219983221076639 ↗
72. Effects of filler-filler and polymer-filler interactions on rheological and mechanical properties of HDPE-wood composites10.1002/app.29336 ↗
73. Flexural and fatigue properties of a bone cement based upon polyethylmethacrylate and hydroxyapatite10.1007/BF00134320 ↗
74. A materials perspective on the design of damage-resilient bone implants through additive/advanced manufacturing10.1007/s11837-019-03999-3 ↗
75. High performance ductile and pseudo-ductile polymer matrix composites: a review10.1016/j.compositesa.2024.108029 ↗
76. Electroactive barium titanate coated titanium scaffold improves osteogenesis and osseointegration with low-intensity pulsed ultrasound for large segmental bone defects
77. Optoelectronic microfluidic device for point-of-care blood plasma viscosity measurement10.1039/D4LC00211C ↗
78. International Tables of the Surface Tension of Water10.1063/1.555688 ↗
79. Overview of sterilization methods for UHMWPE through surface analysis10.1039/D0MA00772B ↗
80. A. Chaichi, A. Prasad, L. Kootta Parambil, S. Shaik, A. Hemmasian Ettefagh, V. Dasa, S. Guo, M.L. Osborn, R. Devireddy, M.M. Khonsari, M.R. Gartia, Improvement of Tribological and Biocompatibility Properties of Orthopedic Materials Using Piezoelectric Direct Discharge Plasma Surface Modification, ACS Biomater. Sci. Eng. 5 (2019) 2147–2159. doi: 10.1021/acsbiomaterials.9b00009.10.1021/acsbiomaterials.9b00009 ↗
81. Surface modification of UHMWPE using ECR plasma for osteoblast and osteoclast differentiation10.1016/j.apsusc.2019.144665 ↗
82. Dry wear studies on reduced graphene oxide filled UHMWPE composites
83. J.R. Cooper, D. Dowson, J. Fisher, The Effect of Transfer Film and Surface Roughness on the Wear of Lubricated Ultra-High Molecular Weight Polyethylene, 1993.10.1016/0267-6605(93)90016-Z ↗
84. Challenges associated with using bovine serum in wear testing orthopaedic biopolymers10.1177/0954411911416047 ↗
85. Friction and Wear Analysis of UHMWPE Material using Pin-on-Disc Tester with Lubricant and Non-Lubricant, in10.1088/1742-6596/1569/3/032057 ↗
86. K.S.K. Karuppiah, S. Sundararajan, The effect of protein adsorption on the friction behavior of ultra-high molecular weight polyethylene, in: Proceedings of IJTC2006, STLE/ASME International Joint Tribology Conference, 2006. http://www.asme.org/about-asme/terms-of-use.
87. Simultaneous improvements in wear resistance and mechanical properties of UHMWPE nanocomposite fabricated via a facile approach10.1016/j.matlet.2016.04.072 ↗
88. Improved wear and mechanical properties of UHMWPE-carbon nanofiber composites through an optimized paraffin-assisted melt-mixing process10.1016/j.compositesb.2010.09.006 ↗
89. Influence of crystallinity on wear behavior of ultrahigh molecular weight polyethylene and the wear mechanism10.1515/polyeng-2022-0127 ↗
90. The effect of counter-face roughness on the tribological behavior of filled and unfilled PTFE
91. Tribological analysis of ultra-high molecular weight polyethylene composites with boron carbide micro and nanoparticles10.1016/j.wear.2023.204861 ↗
92. Tribo-material based on a UHMWPE/RGOC biocomposite for using in artificial joints10.1002/app.50768 ↗
93. A. Wang, J.H. Dumbleton, Ultra-High-Molecular-Weight Polyethylene (UHMWPE) as a Bearing Material in Hip Joint Replacements, in: Encyclopedia of Tribology, Springer US, 2013: pp. 3934–1943. doi: 10.1007/978-0-387-92897-5.10.1007/978-0-387-92897-5_1279 ↗
94. Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites10.1016/j.mser.2008.10.001 ↗
95. Friction and wear of two polyethylenes under different tribological contact conditions
96. Effect of reduced graphene oxide amount on the tribological properties of UHMWPE biocomposites under water-lubricated conditions10.1007/s42452-020-2179-4 ↗
97. Study on wear debris characteristics of different polyethylene under reciprocating sliding and compound motion modes
98. Wear mechanisms of UHMWPE in total joint replacements10.1016/0043-1648(94)07027-X ↗
99. A. Wang, A. Essner, V.K. Polineni, C. Stark, J.H. Dumbleton, Lubrication and wear of ultra-high molecular weight polyethylene in total joint replacements, 1998.10.1016/S0301-679X(98)00005-X ↗
100. Effect of nanofillers on tribological properties of polymer nanocomposites: a review on recent development10.3390/polym13172867 ↗