journal article·2020-06Open access

Microstructural and micromechanical assessment of aged ultra-fast sintered functionally graded iron/tungsten composites

S. Heuer, B.-S. Li, D.E.J. Armstrong, Y. Zayachuk, Ch. Linsmeier

Materials & Design· Volume 191

Abstract

Functionally graded (FG) iron/tungsten (Fe/W) composites are considered for stress-relieving interlayers in tungsten-steel joints, required in future fusion reactors. The macroscopic gradation of the two materials allows relaxation of thermally-induced stresses and hence extend the lifetime of the cyclic-loaded dissimilar materials joints. While many properties, e.g. thermal expansion and strength, of the as-manufactured Fe/W composites are promising with respect to the anticipated application, the temperature-induced microstructural changes and their effect on the material properties remain largely unexplored. Given that the thermodynamic system of FeW contains two types of intermetallic phases, understanding the microstructural changes in the FG Fe/W composites is crucial for long-term operation of fusion reactors. In the present work, the microstructure of ultra-fast sintered Fe/W composites containing 50 and 75 vol% tungsten is studied via electron microscopy (SEM) and X-ray diffraction (XRD) in as-manufactured and thermal aged conditions (300, 500, and 800 °C for up to 72 h). The hardness and modulus of selected composites are measured via nanoindentation, and the fracture toughness of the FeW interfaces is tested via notched micro-cantilever bending tests. The results from microstructural and micromechanical analyses are discussed, and the materials are evaluated for their application in fusion reactors based on the microstructure-to-property relationship.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Powder Metallurgy Techniques and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. On the optimization of the first wall of the DEMO water-cooled lithium lead outboard breeding blanket equatorial module10.1016/j.fusengdes.2016.02.103 ↗
2. A. del Nevo, P. Arena, G. Caruso, P. Chiovaro, P. di Maio, M. Eboli, F. Edemetti, N. Forgione, R. Forte, A. Froio, F. Giannetti, G. D. Gironimo, K. Jiang, S. Liu, F. Moro, R. Mozzillo, L. Savoldi, A. Tarallo, M. Tarantino, A. Tassone, M. Utili, R. Villari, R. Zanino, E. Martelli, Recent progress in developing a feasible and integrated conceptual design of the WCLL BB in EUROfusion project, Fusion Engineering and Design doi:https://doi.org/10.1016/j.fusengdes.2019.03.040.10.1016/j.fusengdes.2019.03.040 ↗
3. F. A. Hernández, P. Pereslavtsev, G. Zhou, H. Neuberger, J. Rey, Q. Kang, L. V. Boccaccini, E. Bubelis, I. Moscato, D. Dongiovanni, An enhanced, near-term HCPB design as driver blanket for the EU DEMO, Fusion Engineering and Design doi:https://doi.org/10.1016/j.fusengdes.2019.02.037.10.1016/j.fusengdes.2019.02.037 ↗
4. Thermomechanical analysis of diffusion-bonded tungsten/EUROFER97 with a vanadium interlayer10.1016/j.jnucmat.2014.09.007 ↗
5. Aiming at understanding thermo-mechanical loads in the first wall of DEMO: stress–strain evolution in a Eurofer-tungsten test component featuring a functionally graded interlayer10.1016/j.fusengdes.2018.07.011 ↗
6. S. Heuer, J. Coenen, G. Pintsuk, J. Matejícek, M. Vilémová, C. Linsmeier, Overview of challenges and developments in joining tungsten and steel for future fusion reactors, Phys. Scr. (submitted).
7. Numerical assessment of functionally graded tungsten/EUROFER coating system for first wall applications10.1016/j.fusengdes.2015.06.120 ↗
8. Development of W-coating with functionally graded W/EUROFER-layers for protection of first-wall materials10.1016/j.fusengdes.2018.01.047 ↗
9. Weber · 2012
10. Functionally graded vacuum plasma sprayed and magnetron sputtered tungsten/EUROFER97 interlayers for joints in helium-cooled divertor components10.1016/j.jnucmat.2013.01.286 ↗
11. Characterization of W/Fe functionally graded materials manufactured by resistance sintering under ultra-high pressure10.1016/j.fusengdes.2014.12.014 ↗
12. Overview of processing technologies for tungsten-steel composites and FGMs for fusion applications10.1515/nuka-2015-0049 ↗
13. Ultra-fast sintered functionally graded Fe/W composites for the first wall of future fusion reactors10.1016/j.compositesb.2018.11.078 ↗
14. Atmospheric plasma spraying of functionally graded steel/tungsten layers for the first wall of future fusion reactors10.1016/j.surfcoat.2019.03.017 ↗
15. Thermal expansion of metal-matrix composites10.1016/0266-3538(94)90122-8 ↗
16. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
17. A thermodynamic evaluation of the C-Fe-W system10.1007/BF02825699 ↗
18. Intermetallic phases of the system Fe-W [Intermetallische Phasen des zweistoffsystems Fe-W]
19. Through thickness elastic profile determination of functionally graded materials10.1007/s11340-015-0043-z ↗
20. Determination of properties of graded materials by inverse analysis and instrumented indentation10.1016/S1359-6454(00)00217-2 ↗
21. Material characterization of FGM plates using elastic waves and an inverse procedure10.1106/86AQ-JY72-5VKT-K1NV ↗
22. The inverse of material properties of functionally graded pipes using the dispersion of guided waves and an artificial neural network10.1016/j.ndteint.2009.02.006 ↗
23. A functionally graded particulate composite: preparation, measurements and failure analysis10.1016/S1359-6454(98)00305-X ↗
24. Determination of constitutive response of plastically graded materials10.1016/j.ijplas.2010.09.001 ↗
25. Investigation of the physical and mechanical properties of hot-pressed machinable si3n4/h-BN composites and FGM10.1016/S0921-5107(01)01048-0 ↗
26. Influence of microstructure on fracture toughness distribution in ceramic–metal functionally graded materials10.1016/j.engfracmech.2008.05.005 ↗
27. Fracture toughness distribution of alumina-titanium functionally graded materials fabricated by spark plasma sintering10.1016/j.jallcom.2018.06.304 ↗
28. Fracture mechanics of functionally graded materials10.1016/0961-9526(95)00029-M ↗
29. Dynamic fracture of compositionally graded materials with cracks along the elastic gradient: experiments and analysis10.1016/S0167-6636(01)00065-5 ↗
30. Mixed mode dynamic fracture in particulate reinforced functionally graded materials10.1007/s11340-006-5867-0 ↗
31. An experimental study of mixed mode crack initiation and growth in functionally graded materials10.1007/s11340-006-6416-6 ↗
32. Quasi-static and dynamic fracture initiation toughness of ti/TiB layered functionally graded material under thermo-mechanical loading10.1016/j.engfracmech.2009.10.006 ↗
33. Characterizing fracture response of cracked transversely graded materials10.1016/j.compstruct.2019.111439 ↗
34. Qu · 2015
35. Processing and temperature-dependent properties of plasma-sprayed tungsten–stainless steel composites10.1088/0031-8949/2009/T138/014041 ↗
36. Vacuum plasma spraying of functionally graded tungsten/EUROFER97 coatings for fusion applications10.1016/j.fusengdes.2018.06.006 ↗
37. Effect of micromechanical models on structural responses of functionally graded plates10.1016/j.compstruct.2014.09.031 ↗
38. Elasto-plastic deformation of compositionally graded metal-ceramic composites10.1016/S1359-6454(96)00403-X ↗
39. Modeling functionally graded materials containing multiple heterogeneities10.1007/s00707-013-1033-9 ↗
40. Simulation of the mechanical behaviour of metal matrix composites10.4028/www.scientific.net/MSF.678.49 ↗
41. Mechanical and thermal properties of individual phases formed in sintered tungsten-steel composites10.12693/APhysPolA.128.718 ↗
42. W–steel and w–WC–steel composites and FGMs produced by hot pressing10.1016/j.fusengdes.2015.06.154 ↗
43. On the relation between microstructure and elastic constants of tungsten/steel composites fabricated by spark plasma sintering10.1016/j.fusengdes.2018.05.056 ↗
44. Schütte · 2012
45. Tavassoli · 2004
46. 2017
47. Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams10.1557/JMR.2005.0048 ↗
48. B.-S. Li, T. J. Marrow, S. G. Roberts, D. E. J. Armstrong, Evaluation of fracture toughness measurements using chevron-notched silicon and tungsten microcantilevers, JOM doi:https://doi.org/10.1007/s11837-019-03696-1.10.1007/s11837-019-03696-1 ↗
49. Procédé mécanique pour déterminer la composition des roches
50. Design of a W/steel functionally graded material for plasma facing components of DEMO10.1016/j.jnucmat.2011.05.054 ↗
51. Materials design data for reduced activation martensitic steel type Eurofer10.1016/j.jnucmat.2004.04.020 ↗
52. Nanoindentation size effect of tungsten single crystal10.1016/S1875-5372(18)30048-1 ↗
53. R. Smith, D. Christopher, S. D. Kenny, A. Richter, B. Wolf, Defect generation and pileup of atoms during nanoindentation of Fe single crystals, Phys. Rev. B 67 (24). doi:https://doi.org/10.1103/physrevb.67.245405.10.1103/PhysRevB.67.245405 ↗
54. The brittle-to-ductile transition in cold rolled tungsten plates: impact of crystallographic texture, grain size and dislocation density on the transition temperature10.1016/j.ijrmhm.2018.09.010 ↗
55. Determination of W-Eurofer interface toughness at 550C10.1016/j.engfracmech.2018.09.016 ↗
56. Correcting for contact area changes in nanoindentation using surface acoustic waves10.1016/j.scriptamat.2016.09.037 ↗
57. Size-dependent fracture toughness of tungsten10.1016/j.actamat.2017.07.030 ↗
58. V. I. Levitas, A. M. Roy, D. L. Preston, Multiple twinning and variant-variant transformations in martensite: phase-field approach, Phys. Rev. B 88 (5). doi:https://doi.org/10.1103/physrevb.88.054113.10.1103/PhysRevB.88.054113 ↗
59. V. I. Levitas, A. M. Roy, Multiphase phase field theory for temperature- and stress-induced phase transformations, Phys. Rev. B 91 (17). doi:https://doi.org/10.1103/physrevb.91.174109.10.1103/PhysRevB.91.174109 ↗
60. Numerical assessment of functionally graded tungsten/steel joints for divertor applications10.1016/j.fusengdes.2010.12.084 ↗